From: Anand <anandkumar_santhanam@pmc-sierra.com>
To: linux-scsi@vger.kernel.org
Cc: jack_wang@usish.com, Sangeetha.Gnanasekaran@pmcs.com,
Vishwanath.Maram@pmcs.com, Harry.Yang@pmcs.com
Subject: [PATCH 12/15] pm80xx: Changed module name and debug messages update
Date: Tue, 12 Feb 2013 04:41:45 -0800 [thread overview]
Message-ID: <511A3889.5050602@pmc-sierra.com> (raw)
>From 78eaee73dd18671795fb6781bb34dc4c5e3410ce Mon Sep 17 00:00:00 2001
From: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com>
Date: Tue, 5 Feb 2013 11:48:05 +0530
Subject: [PATCH 12/15] pm80xx: Changed module name and debug messages update
Changed name in driver to pm80xx. Updated debug messages.
Signed-off-by: Sakthivel K <DL.Team.PMC.SPC.Linux.open.source@pmcs.com>
Signed-off-by: Anand Kumar S <DL.Team.PMC.SPC.Linux.open.source@pmcs.com>
---
drivers/scsi/pm8001/Makefile | 7 ++++---
drivers/scsi/pm8001/pm8001_hwi.c | 11 ++++++-----
drivers/scsi/pm8001/pm8001_init.c | 14 ++++++++++----
drivers/scsi/pm8001/pm8001_sas.h | 6 +++---
4 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/pm8001/Makefile b/drivers/scsi/pm8001/Makefile
index 52f0429..ce4cd87 100755
--- a/drivers/scsi/pm8001/Makefile
+++ b/drivers/scsi/pm8001/Makefile
@@ -4,9 +4,10 @@
# Copyright (C) 2008-2009 USI Co., Ltd.
-obj-$(CONFIG_SCSI_PM8001) += pm8001.o
-pm8001-y += pm8001_init.o \
+obj-$(CONFIG_SCSI_PM8001) += pm80xx.o
+pm80xx-y += pm8001_init.o \
pm8001_sas.o \
pm8001_ctl.o \
- pm8001_hwi.o
+ pm8001_hwi.o \
+ pm80xx_hwi.o
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index c124fc6..265dbf4 100755
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2506,9 +2506,9 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
if (unlikely(!t || !t->lldd_task || !t->dev))
return;
ts = &t->task_status;
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("port_id = %x,device_id = %x\n",
- port_id, dev_id));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "port_id:0x%x, device_id:0x%x, tag:0x%x, event:0x%x\n",
+ port_id, dev_id, tag, event));
switch (event) {
case IO_OVERFLOW:
PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
@@ -4409,8 +4409,9 @@ int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
{
u32 opc, device_id;
int rc = TMF_RESP_FUNC_FAILED;
- PM8001_EH_DBG(pm8001_ha, pm8001_printk("cmd_tag = %x, abort task tag"
- " = %x", cmd_tag, task_tag));
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk("cmd_tag = %x, abort task tag = 0x%x",
+ cmd_tag, task_tag));
if (pm8001_dev->dev_type == SAS_END_DEV)
opc = OPC_INB_SSP_ABORT;
else if (pm8001_dev->dev_type == SATA_DEV)
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index cb17cb9..a9e6db0 100755
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -1698,7 +1698,7 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
const struct pm8001_chip_info *chip;
dev_printk(KERN_INFO, &pdev->dev,
- "pm8001: driver version %s\n", DRV_VERSION);
+ "pm80xx: driver version %s\n", DRV_VERSION);
rc = pci_enable_device(pdev);
if (rc)
goto err_out_enable;
@@ -1746,15 +1746,21 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
list_add_tail(&pm8001_ha->list, &hba_list);
PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
- if (rc)
+ if (rc) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "chip_init failed [ret: %d]\n", rc));
goto err_out_ha_free;
+ }
rc = scsi_add_host(shost, &pdev->dev);
if (rc)
goto err_out_ha_free;
rc = pm8001_request_irq(pm8001_ha);
- if (rc)
+ if (rc) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "pm8001_request_irq failed [ret: %d]\n", rc));
goto err_out_shost;
+ }
PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
if (pm8001_ha->chip_id != chip_8001) {
@@ -2131,7 +2137,7 @@ static int __init pm8001_init(void)
{
int rc = -ENOMEM;
- pm8001_wq = alloc_workqueue("pm8001", 0, 0);
+ pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
if (!pm8001_wq)
goto err;
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 466934d..53d7f3b 100755
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -57,7 +57,7 @@
#include <linux/atomic.h>
#include "pm8001_defs.h"
-#define DRV_NAME "pm8001"
+#define DRV_NAME "pm80xx"
#define DRV_VERSION "0.1.36"
#define PM8001_FAIL_LOGGING 0x01 /* Error message logging */
#define PM8001_INIT_LOGGING 0x02 /* driver init logging */
@@ -66,8 +66,8 @@
#define PM8001_EH_LOGGING 0x10 /* libsas EH function logging*/
#define PM8001_IOCTL_LOGGING 0x20 /* IOCTL message logging */
#define PM8001_MSG_LOGGING 0x40 /* misc message logging */
-#define pm8001_printk(format, arg...) printk(KERN_INFO "%s %d:" format,\
- __func__, __LINE__, ## arg)
+#define pm8001_printk(format, arg...) printk(KERN_INFO "pm80xx %s %d:" \
+ format, __func__, __LINE__, ## arg)
#define PM8001_CHECK_LOGGING(HBA, LEVEL, CMD) \
do { \
if (unlikely(HBA->logging_level & LEVEL)) \
--
1.7.1
reply other threads:[~2013-02-12 12:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=511A3889.5050602@pmc-sierra.com \
--to=anandkumar_santhanam@pmc-sierra.com \
--cc=Harry.Yang@pmcs.com \
--cc=Sangeetha.Gnanasekaran@pmcs.com \
--cc=Vishwanath.Maram@pmcs.com \
--cc=jack_wang@usish.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.