From: Lijo Antony <lijo.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: HDMI support for NVC1 (GeForce GT 540M)
Date: Sun, 24 Feb 2013 21:50:30 +0400 [thread overview]
Message-ID: <512A52E6.6050505@gmail.com> (raw)
Hi,
I have been using nouveau on my laptop (with GeForce GT 540M card) for a
while, and it's been working quite well! Now I am trying to connect my
TV using HDMI port, but wasn't so lucky with that. I would like to know
the current status of HDMI out support for GF108 (NVC1). I am trying
with the latest code from nouveau/master tree (2fee6f5).
When I connect the tv, it's not getting detected by the laptop. I see a
small change in brightness of the laptop screen for a moment and nothing
else. Usually there is nothing in the dmesg as well, but once I saw the
below line.
[ 249.780634] nouveau E[ PDISP][0000:01:00.0] chid 1 mthd 0x0080 data
0x00000000 0x000b5080
But when I removed the HDMI cable, I got the below log.
[ 290.216947] [drm:drm_edid_block_valid] *ERROR* EDID checksum is
invalid, remainder is 130
[ 290.216958] Raw EDID:
[ 290.216964] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
[ 290.216968] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 290.216972] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 290.216976] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 290.216981] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 290.216985] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 290.216989] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 290.216993] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 290.218145] nouveau E[ DRM] DDC responded, but no EDID for HDMI-A-1
I tried several times, each time with similar logs when the cable is
plugged out.
[ 374.467404] [drm:drm_edid_block_valid] *ERROR* EDID checksum is
invalid, remainder is 130
[ 374.467414] Raw EDID:
[ 374.467420] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
[ 374.467425] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 374.467429] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 374.467433] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 374.467437] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 374.467441] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 374.467445] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 374.467449] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 374.468604] nouveau E[ DRM] DDC responded, but no EDID for HDMI-A-1
------------------------
[ 171.633395] [drm:drm_edid_block_valid] *ERROR* EDID checksum is
invalid, remainder is 244
[ 171.633407] Raw EDID:
[ 171.633413] 00 ff ff ff ff ff ff 00 1e 6d 01 00 01 01 01 01
[ 171.633417] 01 14 01 03 80 a0 5a 78 0a d9 b0 a3 57 49 9c 25
[ 171.633421] 11 49 4b 20 00 00 01 01 01 01 01 01 01 01 01 01
[ 171.633425] 01 01 01 01 01 01 01 1d 00 72 51 d0 1e 20 6e 28
[ 171.633429] 55 00 c4 8e 21 00 00 1e 8c 0a d0 8a 20 e0 2d 10
[ 171.633433] 10 3e 96 00 13 8e ff ff ff ff ff ff ff ff ff ff
[ 171.633437] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 171.633441] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 171.634517] nouveau E[ DRM] DDC responded, but no EDID for HDMI-A-1
----------------
[ 229.771970] [drm:drm_edid_block_valid] *ERROR* EDID checksum is
invalid, remainder is 201
[ 229.771981] Raw EDID:
[ 229.771988] 00 ff ff ff ff ff ff 00 1e 6d 01 00 01 01 01 01
[ 229.771992] 01 14 01 03 80 a0 5a 78 0a d9 b0 a3 57 49 bf ff
[ 229.771996] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 229.772000] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 229.772004] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 229.772008] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 229.772012] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 229.772016] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 229.773103] nouveau E[ DRM] DDC responded, but no EDID for HDMI-A-1
I am trying to figure out from code, but any help would be greatly
appreciated! I can post the full logs or .config file if required.
Thanks in advance,
-lijo
reply other threads:[~2013-02-24 17:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=512A52E6.6050505@gmail.com \
--to=lijo.kernel-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.