From: Don Slutz <Don@CloudSwitch.Com>
To: David Vrabel <david.vrabel@citrix.com>
Cc: Daniel Kiper <daniel.kiper@oracle.com>,
kexec@lists.infradead.org, xen-devel@lists.xen.org
Subject: Re: [Xen-devel] [PATCH 0/4] kexec-tools: add support for Xen 4.3
Date: Mon, 25 Feb 2013 13:34:27 -0500 [thread overview]
Message-ID: <512BAEB3.4010708@CloudSwitch.Com> (raw)
In-Reply-To: <1361469460-18771-1-git-send-email-david.vrabel@citrix.com>
On 02/21/13 12:57, David Vrabel wrote:
> The series adds support for the new hypercall ABI which should be
> provided by Xen 4.3. Images are loaded into Xen directly with no
> kernel involvement.
>
> Do not apply until the hypervisor side patches are applied to Xen.
>
> Patch 1 is unrelated but kexec wouldn't work for me without it. Not
> sure why I had problems, perhaps a toolstack specific issue?
>
> Patch 2 makes libxc 4.3 mandatory for Xen support.
>
> Patch 3 removes a use of /proc/iomem in favour of libxc.
>
> Patch 4 adds the support for loading an image into Xen.
>
> This series explicitly drops support for older version of libxc/Xen as
> supporting kexec on these hypervisors requires kernel support that
> will never be available upstream.
>
> David
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
I did not find a fix/change to get_xen_vmcoreinfo() to call on
xc_kexec_get_range(xc, KEXEC_RANGE_MA_VMCOREINFO, ...
I found the following to work.
-Don Slutz
From 2cabc018d7613b0d2ac487cbf2a2e9438a441a8d Mon Sep 17 00:00:00 2001
From: Don Slutz <Don@CloudSwitch.com>
Date: Fri, 22 Feb 2013 22:27:03 -0500
Subject: [PATCH 1/2] Switch to use xc_kexec_get_range for
get_xen_vmcoreinfo.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
---
kexec/crashdump-xen.c | 20 ++++++++++++++++++++
kexec/crashdump.c | 2 ++
2 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/kexec/crashdump-xen.c b/kexec/crashdump-xen.c
index 56b0653..8179b72 100644
--- a/kexec/crashdump-xen.c
+++ b/kexec/crashdump-xen.c
@@ -161,6 +161,26 @@ unsigned long xen_architecture(struct
crash_elf_info *elf_info)
}
#ifdef HAVE_LIBXENCTRL
+int get_xen_vmcoreinfo(uint64_t *addr, uint64_t *len)
+{
+ xc_interface *xc;
+ int ret = 0;
+
+ xc = xc_interface_open(NULL, NULL, 0);
+ if ( !xc ) {
+ fprintf(stderr, "failed to open xen control interface.\n");
+ return -1;
+ }
+
+ ret = xc_kexec_get_range(xc, KEXEC_RANGE_MA_VMCOREINFO, 0, len,
addr);
+
+ xc_interface_close(xc);
+
+ if (ret < 0)
+ return -1;
+ return 0;
+}
+
int xen_get_nr_phys_cpus(void)
{
xc_interface *xc;
diff --git a/kexec/crashdump.c b/kexec/crashdump.c
index 847d080..3d2c1b9 100644
--- a/kexec/crashdump.c
+++ b/kexec/crashdump.c
@@ -142,7 +142,9 @@ int get_kernel_vmcoreinfo(uint64_t *addr, uint64_t *len)
return get_vmcoreinfo("/sys/kernel/vmcoreinfo", addr, len);
}
+#ifndef HAVE_LIBXENCTRL
int get_xen_vmcoreinfo(uint64_t *addr, uint64_t *len)
{
return get_vmcoreinfo("/sys/hypervisor/vmcoreinfo", addr, len);
}
+#endif
--
1.7.1
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
next prev parent reply other threads:[~2013-02-25 18:34 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-21 17:57 [PATCH 0/4] kexec-tools: add support for Xen 4.3 David Vrabel
2013-02-21 17:57 ` [PATCH 1/4] purgatory: put variables altered by kexec in .data not .bss David Vrabel
2013-02-21 17:57 ` David Vrabel
2013-02-21 17:57 ` [PATCH 2/4] kexec/xen: require libxc from Xen 4.3 David Vrabel
2013-02-21 17:57 ` David Vrabel
2013-02-21 17:57 ` [PATCH 3/4] kexec/xen: use libxc to get location of crash notes David Vrabel
2013-02-21 17:57 ` David Vrabel
2013-02-26 13:53 ` [Xen-devel] " Don Slutz
2013-02-26 13:53 ` Don Slutz
2013-02-21 17:57 ` [PATCH 4/4] kexec/xen: directly load images images into Xen David Vrabel
2013-03-12 11:29 ` Daniel Kiper
2013-03-12 11:29 ` Daniel Kiper
2013-02-21 17:57 ` David Vrabel
2013-02-22 8:14 ` [PATCH 0/4] kexec-tools: add support for Xen 4.3 Jan Beulich
2013-02-22 8:14 ` [Xen-devel] " Jan Beulich
2013-02-22 11:39 ` David Vrabel
2013-02-22 11:39 ` David Vrabel
2013-02-25 18:34 ` Don Slutz
2013-02-25 18:34 ` Don Slutz [this message]
2013-02-25 19:34 ` David Vrabel
2013-02-25 19:34 ` [Xen-devel] " David Vrabel
2013-03-08 10:30 ` Daniel Kiper
2013-03-08 10:30 ` Daniel Kiper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=512BAEB3.4010708@CloudSwitch.Com \
--to=don@cloudswitch.com \
--cc=daniel.kiper@oracle.com \
--cc=david.vrabel@citrix.com \
--cc=kexec@lists.infradead.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.