On 03/03/13 18:02, Ismael Barros² wrote:
> Hi there,
>
> I'm new to Yocto, and I keep finding errors that prevent me from 
> building a minimal image.
>
> I've just installed poky-danny-8.0, sourced oe-init-build-env, and 
> bitbaked core-image-minimal. The first error is that bitbake sanity 
> checks fail to detect the network access, while my network 
> connectivity is perfect, and downloading packages seem to work if I 
> disable this checks. Full log: http://pastebin.com/6jJCC1qp. I 
> couldn't find any log that told me which piece of code was failing, so 
> I jut disabled this check on ../meta-yocto/conf/distro/poky.conf
>
> Upon trying again, building started fine, but it started failing to 
> build the documentation for some packages, i.e. binutils-cross. First 
> off, I want to build a single mission appliance, I don't really want 
> to build any documentation, is there any way I can disable it? Anyway, 
> this is the build log: http://pastebin.com/n9U4GfjG. Looks like there 
> are some texinfo commands my machine (texinfo 5.0) doesn't recognice. 
> According to http://sourceware.org/bugzilla/show_bug.cgi?id=15183, 
> it's a known bug on binuilts-2.22 and it's fixed on binuilts-2.23.
>
> Poking around, looks like "updating" to binutils-2.23 got it kind of 
> working:
>
> mv ./meta/recipes-devtools/binutils/binutils-2.22.inc 
> ./meta/recipes-devtools/binutils/binutils-2.23.1.inc
> mv ./meta/recipes-devtools/binutils/binutils-cross-canadian_2.22.bb 
> <http://binutils-cross-canadian_2.22.bb> 
> ./meta/recipes-devtools/binutils/binutils-cross-canadian_2.23.1.bb 
> <http://binutils-cross-canadian_2.23.1.bb>
> mv ./meta/recipes-devtools/binutils/binutils_2.22.bb 
> <http://binutils_2.22.bb> 
> ./meta/recipes-devtools/binutils/binutils_2.23.1.bb 
> <http://binutils_2.23.1.bb>
> mv ./meta/recipes-devtools/binutils/binutils-crosssdk_2.22.bb 
> <http://binutils-crosssdk_2.22.bb> 
> ./meta/recipes-devtools/binutils/binutils-crosssdk_2.23.1.bb 
> <http://binutils-crosssdk_2.23.1.bb>
> mv ./meta/recipes-devtools/binutils/binutils-cross_2.22.bb 
> <http://binutils-cross_2.22.bb> 
> ./meta/recipes-devtools/binutils/binutils-cross_2.23.1.bb 
> <http://binutils-cross_2.23.1.bb>
>
> I also had to update the md5 and sha1 
> on ./meta/recipes-devtools/binutils/binutils-2.23.1.inc. After that, 
> some patches failed to apply: 
> libtool-2.4-update.patch, binutils-2.19.1-ld-sysroot.patch, binutils-poison.patch, 
> libtool-rpath-fix.patch, clone-shadow.patch... so gave up
> What would be the appropiate way to workaround this issue, besides not 
> using Archlinux?
>
> Btw, if the bitbake core-image-minimal fails because there's not 
> enough disk space, and the free disk in the partition is left to 0, 
> after that even the bitbake clean command fails :\
>
>
> Anyway, thank you guys for what seems to be an excellent BSP factory, 
> I'm really looking forward to start using it at our company :)
>
> Kind regards,
> Ismael
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Hi Ismael,

Archlinux currently has texinfo5 in it's core repo which breaks a 
significant amount of packages. I would suggest downgrading to 
textinfo4.x (can't remember the exact version) and then things should at 
least start to get going again. I'm afraid however if you insist on 
using a rolling release distro you are going to hit these problems more 
often than most, if you want a stable build environment then I would 
suggest using a sanity tested distro. If you do with to persist with 
Archlinux I suggest you follow oe-core/yocto master and update regulary.

Cheers,
Jack.