From: Bernhard Posselt <mail@bernhard-posselt.com>
To: Jeff King <peff@peff.net>
Cc: git@vger.kernel.org
Subject: Re: Memory corruption when rebasing with git version 1.8.1.5 on arch
Date: Sat, 09 Mar 2013 01:08:32 +0100 [thread overview]
Message-ID: <513A7D80.5000501@bernhard-posselt.com> (raw)
In-Reply-To: <20130308212831.GA9217@sigill.intra.peff.net>
On 03/08/2013 10:28 PM, Jeff King wrote:
> On Fri, Mar 08, 2013 at 01:19:57PM +0100, Bernhard Posselt wrote:
>
>> Using valgrind gives me:
>>
>> $ valgrind /usr/bin/git pull --rebasehttps://github.com/PatrickHeller/core.git master
>> ==5995== Memcheck, a memory error detector
>> ==5995== Copyright (C) 2002-2012, and GNU GPL'd, by Julian Seward et al.
>> ==5995== Using Valgrind-3.8.1 and LibVEX; rerun with -h for copyright info
>> ==5995== Command: /usr/bin/git pull --rebasehttps://github.com/PatrickHeller/core.git master
>> ==5995==
>> remote: Counting objects: 5, done.
>> remote: Compressing objects: 100% (1/1), done.
>> remote: Total 3 (delta 2), reused 3 (delta 2)
>> Unpacking objects: 100% (3/3), done.
>> Fromhttps://github.com/PatrickHeller/core
>> * branch master -> FETCH_HEAD
>> First, rewinding head to replay your work on top of it...
>> Applying: distinguish between touch and write
>> Applying: remove debug output
>> *** Error in `git': malloc(): memory corruption: 0x00000000027f14e0 ***
> The problem is likely happening in a sub-command of git-pull, so
> valgrind isn't reporting it. Can you try re-running with
> "valgrind --trace-children=yes", or alternatively narrow down the
> problematic command by setting GIT_TRACE=1 in the environment?
>
> -Peff
Thanks for the reply!
Heres the output with GIT_TRACE=1, the valgrind log has 4000 lines. If
you should still require the valgrind log, please tell me.
$ git pull --rebase https://github.com/PatrickHeller/core.git master
trace: exec: 'git-pull' '--rebase'
'https://github.com/PatrickHeller/core.git' 'master'
trace: run_command: 'git-pull' '--rebase'
'https://github.com/PatrickHeller/core.git' 'master'
trace: built-in: git 'rev-parse' '--git-dir'
trace: built-in: git 'rev-parse' '--is-bare-repository'
trace: built-in: git 'rev-parse' '--show-toplevel'
trace: built-in: git 'ls-files' '-u'
trace: built-in: git 'symbolic-ref' '-q' 'HEAD'
trace: built-in: git 'config' '--bool' 'branch.master.rebase'
trace: built-in: git 'config' '--bool' 'pull.rebase'
trace: built-in: git 'rev-parse' '-q' '--verify' 'HEAD'
trace: built-in: git 'rev-parse' '--verify' 'HEAD'
trace: built-in: git 'update-index' '-q' '--ignore-submodules' '--refresh'
trace: built-in: git 'diff-files' '--quiet' '--ignore-submodules'
trace: built-in: git 'diff-index' '--cached' '--quiet'
'--ignore-submodules' 'HEAD' '--'
trace: built-in: git 'rev-parse' '-q' '--git-dir'
trace: built-in: git 'rev-parse' '-q' '--verify'
'refs/remotes/https://github.com/PatrickHeller/core.git/master'
trace: built-in: git 'rev-parse' '-q' '--verify' 'HEAD'
trace: built-in: git 'fetch' '--update-head-ok'
'https://github.com/PatrickHeller/core.git' 'master'
trace: run_command: 'git-remote-https'
'https://github.com/PatrickHeller/core.git'
'https://github.com/PatrickHeller/core.git'
trace: run_command: 'rev-list' '--objects' '--stdin' '--not' '--all'
'--quiet'
trace: run_command: 'fetch-pack' '--stateless-rpc' '--stdin'
'--lock-pack' '--thin' 'https://github.com/PatrickHeller/core.git/'
trace: exec: 'git' 'fetch-pack' '--stateless-rpc' '--stdin'
'--lock-pack' '--thin' 'https://github.com/PatrickHeller/core.git/'
trace: built-in: git 'fetch-pack' '--stateless-rpc' '--stdin'
'--lock-pack' '--thin' 'https://github.com/PatrickHeller/core.git/'
remote: Counting objects: 5, done.
remote: Compressing objects: 100% (1/1), done.
remote: Total 3 (delta 2), reused 3 (delta 2)
trace: run_command: 'unpack-objects' '--pack_header=2,3'
trace: exec: 'git' 'unpack-objects' '--pack_header=2,3'
trace: built-in: git 'unpack-objects' '--pack_header=2,3'
Unpacking objects: 100% (3/3), done.
trace: run_command: 'rev-list' '--objects' '--stdin' '--not' '--all'
trace: exec: 'git' 'rev-list' '--objects' '--stdin' '--not' '--all'
trace: built-in: git 'rev-list' '--objects' '--stdin' '--not' '--all'
From https://github.com/PatrickHeller/core
* branch master -> FETCH_HEAD
trace: built-in: git 'rev-parse' '-q' '--verify' 'HEAD'
trace: built-in: git 'show-branch' '--merge-base' 'refs/heads/master'
'd686039828089d53fb42e42046d7a9a3992a0507'
trace: built-in: git 'fmt-merge-msg'
trace: built-in: git 'rev-parse' '--parseopt' '--' '--onto'
'd686039828089d53fb42e42046d7a9a3992a0507'
'd686039828089d53fb42e42046d7a9a3992a0507'
trace: built-in: git 'rev-parse' '--git-dir'
trace: built-in: git 'rev-parse' '--is-bare-repository'
trace: built-in: git 'rev-parse' '--show-toplevel'
trace: built-in: git 'config' '--bool' 'rebase.stat'
trace: built-in: git 'config' '--bool' 'rebase.autosquash'
trace: built-in: git 'rev-parse' '--verify'
'd686039828089d53fb42e42046d7a9a3992a0507^0'
trace: built-in: git 'rev-parse' '--verify'
'd686039828089d53fb42e42046d7a9a3992a0507^0'
trace: built-in: git 'symbolic-ref' '-q' 'HEAD'
trace: built-in: git 'rev-parse' '--verify' 'master^0'
trace: built-in: git 'rev-parse' '--verify' 'HEAD'
trace: built-in: git 'update-index' '-q' '--ignore-submodules' '--refresh'
trace: built-in: git 'diff-files' '--quiet' '--ignore-submodules'
trace: built-in: git 'diff-index' '--cached' '--quiet'
'--ignore-submodules' 'HEAD' '--'
trace: built-in: git 'merge-base'
'd686039828089d53fb42e42046d7a9a3992a0507'
'0525bbd73c9015499ba92d1ac654b980aaca35b2'
First, rewinding head to replay your work on top of it...
trace: built-in: git 'checkout' '-q'
'd686039828089d53fb42e42046d7a9a3992a0507^0'
trace: built-in: git 'update-ref' 'ORIG_HEAD'
'0525bbd73c9015499ba92d1ac654b980aaca35b2'
trace: exec: 'git-am' '--rebasing' '--resolvemsg=
When you have resolved this problem, run "git rebase --continue".
If you prefer to skip this patch, run "git rebase --skip" instead.
To check out the original branch and stop rebasing, run "git rebase
--abort".
'
trace: run_command: 'git-am' '--rebasing' '--resolvemsg=
When you have resolved this problem, run "git rebase --continue".
If you prefer to skip this patch, run "git rebase --skip" instead.
To check out the original branch and stop rebasing, run "git rebase
--abort".
'
trace: built-in: git 'format-patch' '-k' '--stdout' '--full-index'
'--ignore-if-in-upstream' '--src-prefix=a/' '--dst-prefix=b/'
'--no-renames'
'd686039828089d53fb42e42046d7a9a3992a0507..0525bbd73c9015499ba92d1ac654b980aaca35b2'
trace: built-in: git 'rev-parse' '--parseopt' '--' '--rebasing'
'--resolvemsg=
When you have resolved this problem, run "git rebase --continue".
If you prefer to skip this patch, run "git rebase --skip" instead.
To check out the original branch and stop rebasing, run "git rebase
--abort".
'
trace: built-in: git 'rev-parse' '--git-dir'
trace: built-in: git 'rev-parse' '--show-prefix'
trace: built-in: git 'rev-parse' '--show-toplevel'
trace: built-in: git 'var' 'GIT_COMMITTER_IDENT'
trace: built-in: git 'rev-parse' '--verify' '-q' 'HEAD'
trace: built-in: git 'config' '--bool' '--get' 'am.keepcr'
trace: built-in: git 'mailsplit' '-d4'
'-o/srv/http/owncloud/.git/rebase-apply' '-b' '--'
trace: built-in: git 'update-index' '-q' '--refresh'
trace: built-in: git 'diff-index' '--cached' '--name-only' 'HEAD' '--'
trace: built-in: git 'cat-file' '-t'
'48bb53030c657e1133da47765c7c778a069af665'
trace: built-in: git 'cat-file' 'commit'
'48bb53030c657e1133da47765c7c778a069af665'
trace: built-in: git 'config' 'i18n.commitencoding'
trace: built-in: git 'show' '-s' '--pretty=raw' '--encoding=UTF-8'
'48bb53030c657e1133da47765c7c778a069af665' '--'
trace: built-in: git 'diff-tree' '--root' '--binary' '--full-index'
'48bb53030c657e1133da47765c7c778a069af665'
Applying: distinguish between touch and write
trace: built-in: git 'write-tree'
trace: built-in: git 'rev-parse' '--verify' '-q' 'HEAD'
trace: built-in: git 'commit-tree'
'd785d568d8b4649dfdcc01e03d6c8e87b036ea5a' '-p'
'd686039828089d53fb42e42046d7a9a3992a0507'
trace: built-in: git 'update-ref' '-m' 'pull --rebase
https://github.com/PatrickHeller/core.git master: distinguish between
touch and write' 'HEAD' '2726978d8cbd9b0a3367fd3d62b64b4c78438e79'
trace: built-in: git 'cat-file' '-t'
'45869afa5ac718e11c3d2e3bccdb501a022cfc24'
trace: built-in: git 'cat-file' 'commit'
'45869afa5ac718e11c3d2e3bccdb501a022cfc24'
trace: built-in: git 'config' 'i18n.commitencoding'
trace: built-in: git 'show' '-s' '--pretty=raw' '--encoding=UTF-8'
'45869afa5ac718e11c3d2e3bccdb501a022cfc24' '--'
trace: built-in: git 'diff-tree' '--root' '--binary' '--full-index'
'45869afa5ac718e11c3d2e3bccdb501a022cfc24'
Applying: remove debug output
*** Error in `git': malloc(): memory corruption: 0x000000000139f4e0 ***
next prev parent reply other threads:[~2013-03-09 0:09 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 12:19 Memory corruption when rebasing with git version 1.8.1.5 on arch Bernhard Posselt
2013-03-08 21:28 ` Jeff King
2013-03-09 0:08 ` Bernhard Posselt [this message]
2013-03-09 4:48 ` Jeff King
2013-03-09 10:54 ` Bernhard Posselt
2013-03-10 7:05 ` Jeff King
2013-03-10 11:04 ` Bernhard Posselt
2013-03-10 11:45 ` Bernhard Posselt
2013-03-11 5:18 ` Jeff King
2013-03-19 10:42 ` Bernhard Posselt
2013-03-19 13:44 ` Jeff King
2013-03-19 16:02 ` Junio C Hamano
2013-03-22 18:08 ` Junio C Hamano
2013-03-22 21:24 ` Jeff King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=513A7D80.5000501@bernhard-posselt.com \
--to=mail@bernhard-posselt.com \
--cc=git@vger.kernel.org \
--cc=peff@peff.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.