Re: [PATCH/RFC 11/12] ARM: shmobile: r8a7779: Register GPIO devices

[Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]

Hello.

On 10-03-2013 22:58, Laurent Pinchart wrote:

> Move GPIOs handling from the PFC device to separate GPIO devices.

> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
>   arch/arm/mach-shmobile/setup-r8a7779.c | 58 ++++++++++++++++++++++++++++++----
>   1 file changed, 52 insertions(+), 6 deletions(-)

> diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
> index c54ff9b..1580605 100644
> --- a/arch/arm/mach-shmobile/setup-r8a7779.c
> +++ b/arch/arm/mach-shmobile/setup-r8a7779.c
[...]
>   static struct platform_device r8a7779_pfc_device = {
> @@ -80,9 +76,59 @@ static struct platform_device r8a7779_pfc_device = {
>   	.num_resources	= ARRAY_SIZE(r8a7779_pfc_resources),
>   };
>
> +#define R8A7779_GPIO(idx, npins) \
> +static struct resource r8a7779_gpio##idx##_resources[] = {		\
> +	[0] = {								\
> +		.start	= 0xffc40000 + 0x1000 * (idx),			\
> +		.end	= 0xffc4002b + 0x1000 * (idx),			\
> +		.flags	= IORESOURCE_MEM,				\
> +	},								\
> +	[1] = {								\
> +		.start	= gic_spi(141 + (idx)),				\

    This file uses gic_iid() now instead.

WBR, Sergei							\