From mboxrd@z Thu Jan 1 00:00:00 1970 From: Harald Hoyer Subject: Re: initrd-xxx.img create dracut not correct Date: Tue, 12 Mar 2013 09:37:19 +0100 Message-ID: <513EE93F.1090909@redhat.com> References: <513964D9.7060700@gmail.com> <51398CEE.5090502@redhat.com> <513C528C.2010200@gmail.com> <513DA469.80505@redhat.com> <513E8164.8000908@gmail.com> Mime-Version: 1.0 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <513E8164.8000908-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: initramfs-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-ID: Content-Type: text/plain; charset="utf-8" To: yeyouqun Cc: initramfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Am 12.03.2013 02:14, schrieb yeyouqun: > =E4=BA=8E 2013-3-11 17:31, Harald Hoyer =E5=86=99=E9=81=93: >> Am 10.03.2013 10:29, schrieb yeyouqun: >>> =E4=BA=8E 2013-3-8 15:02, Harald Hoyer =E5=86=99=E9=81=93: >>>> Am 08.03.2013 05:11, schrieb yeyouqun: >>>>> Recently I upgraded linux kernel to 3.6.10 and upgrade dracut ver= sion to 024, >>>>> system starts up OK on 3.6.10. But when I upgraded kernel from 3.= 6.10 to >>>>> 3.8.2, >>>>> dracut failed to start up the system. Message when start up reads= : >>>>> >>>>> ...... >>>>> dracut: dracut-dracut-024- >>>>> rpcbind: cannot create socket for udp6 >>>>> rpcbind: cannot create socket for tcp6 >>>>> mount: unknoun filesys >>>>> udev: starting version 147 >>>>> systend-udevd (139): /proc/139/oom_adj is deprecated, pleas= e use >>>>> /proc/139/oom_score_adj instead. >>>>> dracut Warning: Could not boot. >>>>> dracut Warning: Could not boot. >>>>> Dropping to debug shell. >>>>> /bin/sh: can't access tty; job control turned off >>>>> ...... >>>>> >>>>> But when I unpack the initrd-3.8.2.img, the /lib/modules director= y shows as >>>>> below: >>>>> >>>>> modules ---- 3.8.2 >>>>> | >>>>> |__ 3.6.10 >>>>> >>>>> all the kernel modules reside in "3.6.10" directory and other fil= es, such as >>>>> "modules.dep" and etc. reside in 3.8.2, I think this is the reaso= n why system >>>>> can't start up. >>>>> >>>>> I upgraded kernel by the steps as(in kernel source tree of 3.8.2)= : >>>>> >>>>> make >>>>> make modules_install >>>>> make install >>>>> >>>>> Any one can tell how to fix this behavior of dracut? >>>> What's the output of: >>> output is two big, I appende it. >>>> # dracut --debug test.img 3.8.2 >> /usr/lib/dracut/dracut-functions.sh@1377(dracut_kernel_post): xargs = -r modprobe >> -a -d / --ignore-install --show-depends --set-version 3.8.2 >> /usr/lib/dracut/dracut-functions.sh@1382(dracut_kernel_post): [[ ins= mod =3D >> insmod ]] >> /usr/lib/dracut/dracut-functions.sh@1383(dracut_kernel_post): echo >> ///lib/modules/3.6.10/kernel/arch/x86/crypto/crc32c-intel.ko >> >> >> This looks fishy... >> >> >> What is the output of: >> >> # modprobe -a --ignore-install --show-depends --set-version 3.8.2 xo= r >> > [root@localhost mnt]# modprobe -a --ignore-install --show-depends --s= et-version > 3.8.2 xor > insmod /lib/modules/3.8.2/kernel/crypto/xor.ko and what is the output of: # modprobe -a -d / --ignore-install --show-depends --set-version 3.8.2 = xor