From: Lijo Antony <lijo.kernel@gmail.com>
To: airlied@linux.ie, bskeggs@redhat.com
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [3.9.0-rc2] nouveau deadlock when HDMI TV is connected
Date: Sat, 16 Mar 2013 22:29:50 +0400 [thread overview]
Message-ID: <5144BA1E.7000203@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 8096 bytes --]
Hi,
This is a Dell Inspiron N5110 laptop with Optimus mess.
Until 3.9.0-rc1, tv connected throuh HDMI was not getting detected. But
in 3.9.0-rc2, when I connect HDMI cable, I get this,
=============================================
[ INFO: possible recursive locking detected ]
3.9.0-rc2 #22 Not tainted
---------------------------------------------
kworker/0:1/54 is trying to acquire lock:
(&dmac->lock){+.+...}, at: [<ffffffffa05fffb3>] evo_wait+0x43/0xf0
[nouveau]
but task is already holding lock:
(&dmac->lock){+.+...}, at: [<ffffffffa05fffb3>] evo_wait+0x43/0xf0
[nouveau]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&dmac->lock);
lock(&dmac->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by kworker/0:1/54:
#0: (events){.+.+.+}, at: [<ffffffff8106e311>]
process_one_work+0x171/0x4c0
#1: ((&nv_connector->hpd_work)){+.+.+.}, at: [<ffffffff8106e311>]
process_one_work+0x171/0x4c0
#2: (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffffa022ee2a>]
drm_modeset_lock_all+0x2a/0x70 [drm]
#3: (&crtc->mutex){+.+.+.}, at: [<ffffffffa022ee54>]
drm_modeset_lock_all+0x54/0x70 [drm]
#4: (&dmac->lock){+.+...}, at: [<ffffffffa05fffb3>]
evo_wait+0x43/0xf0 [nouveau]
stack backtrace:
Pid: 54, comm: kworker/0:1 Not tainted 3.9.0-rc2 #22
Call Trace:
[<ffffffff810b71e5>] __lock_acquire+0x715/0x1be0
[<ffffffffa056361c>] ? dcb_table+0x1ac/0x2a0 [nouveau]
[<ffffffff810b8c31>] lock_acquire+0xa1/0x130
[<ffffffffa05fffb3>] ? evo_wait+0x43/0xf0 [nouveau]
[<ffffffff816aac59>] ? mutex_lock_nested+0x299/0x340
[<ffffffff816aaa09>] mutex_lock_nested+0x49/0x340
[<ffffffffa05fffb3>] ? evo_wait+0x43/0xf0 [nouveau]
[<ffffffff810b954f>] ? mark_held_locks+0xaf/0x110
[<ffffffffa05fffb3>] evo_wait+0x43/0xf0 [nouveau]
[<ffffffffa0602a63>] nv50_display_flip_next+0x713/0x7a0 [nouveau]
[<ffffffff816ab95e>] ? mutex_unlock+0xe/0x10
[<ffffffffa0600097>] ? evo_kick+0x37/0x40 [nouveau]
[<ffffffffa0602cee>] nv50_crtc_commit+0x10e/0x230 [nouveau]
[<ffffffffa0158125>] drm_crtc_helper_set_mode+0x365/0x510 [drm_kms_helper]
[<ffffffffa015953e>] drm_crtc_helper_set_config+0xa4e/0xb70
[drm_kms_helper]
[<ffffffffa022fe71>] drm_mode_set_config_internal+0x31/0x70 [drm]
[<ffffffffa0157621>] drm_fb_helper_set_par+0x71/0xf0 [drm_kms_helper]
[<ffffffffa022eaa2>] ? drm_modeset_unlock_all+0x52/0x60 [drm]
[<ffffffffa0157581>] drm_fb_helper_hotplug_event+0x81/0xb0
[drm_kms_helper]
[<ffffffffa05e964c>] nouveau_fbcon_output_poll_changed+0x1c/0x20 [nouveau]
[<ffffffffa0157bbb>] drm_kms_helper_hotplug_event+0x2b/0x40
[drm_kms_helper]
[<ffffffffa0158ada>] drm_helper_hpd_irq_event+0x12a/0x140 [drm_kms_helper]
[<ffffffffa05ec323>] nouveau_connector_hotplug_work+0x93/0x100 [nouveau]
[<ffffffff8106e371>] process_one_work+0x1d1/0x4c0
[<ffffffff8106e311>] ? process_one_work+0x171/0x4c0
[<ffffffff8106fd0f>] worker_thread+0x10f/0x380
[<ffffffff8106fc00>] ? busy_worker_rebind_fn+0xb0/0xb0
[<ffffffff8107aaca>] kthread+0xea/0xf0
[<ffffffff8107a9e0>] ? kthread_create_on_node+0x160/0x160
[<ffffffff816b80ac>] ret_from_fork+0x7c/0xb0
[<ffffffff8107a9e0>] ? kthread_create_on_node+0x160/0x160
This is consistent and git bisect pointed at,
65b5f42e2a9eb9c8383fb67698bf8c27657f8c14 is the first bad commit
commit 65b5f42e2a9eb9c8383fb67698bf8c27657f8c14
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Wed Feb 20 16:47:44 2013 +1000
drm/nve0/graph: some random reg moved on kepler
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
:040000 040000 9658d1fd413b8797fe06fb2ca8ce681d4dbbedb0
c5b38586625718fc78c0eb062af3baa201fe2e7f M drivers
65b5f42e2a9eb9c8383fb67698bf8c27657f8c14
commit 65b5f42e2a9eb9c8383fb67698bf8c27657f8c14
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Wed Feb 20 16:47:44 2013 +1000
drm/nve0/graph: some random reg moved on kepler
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/nve0.c
b/drivers/gpu/drm/nouveau/core/engine/graph/nve0.c
index 61cec0f..4857f91 100644
--- a/drivers/gpu/drm/nouveau/core/engine/graph/nve0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/graph/nve0.c
@@ -350,7 +350,7 @@ nve0_graph_init_gpc_0(struct nvc0_graph_priv *priv)
nv_wr32(priv, GPC_UNIT(gpc, 0x0918), magicgpc918);
}
- nv_wr32(priv, GPC_BCAST(0x1bd4), magicgpc918);
+ nv_wr32(priv, GPC_BCAST(0x3fd4), magicgpc918);
nv_wr32(priv, GPC_BCAST(0x08ac), nv_rd32(priv, 0x100800));
}
But looking at 65b5f42e2a9eb9c8383fb67698bf8c27657f8c14, it looks I
might have done some mistake in bisecting. I will try again later.
Please let me know, if you need more info.
-lijo
git bisect log
--------------
# bad: [f6161aa153581da4a3867a2d1a7caf4be19b6ec9] Linux 3.9-rc2
git bisect bad f6161aa153581da4a3867a2d1a7caf4be19b6ec9
# good: [6dbe51c251a327e012439c4772097a13df43c5b8] Linux 3.9-rc1
git bisect good 6dbe51c251a327e012439c4772097a13df43c5b8
# good: [f40ebd6bcbbd0d30591f42dc16be52b5086a366b] drm/i915: Turn off
hsync and vsync on ADPA when disabling crt
git bisect good f40ebd6bcbbd0d30591f42dc16be52b5086a366b
# bad: [2cc79544bd0aabb4b3cf467ead5df526d9134c64] Merge branch
'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into
drm-next
git bisect bad 2cc79544bd0aabb4b3cf467ead5df526d9134c64
# bad: [f6853faa85793bf23b46787e4039824d275453c2] drm/nouveau: Fix typo
in init_idx_addr_latched().
git bisect bad f6853faa85793bf23b46787e4039824d275453c2
# bad: [650e1203c11354ba84d69ba445abc0efcfe3890a] drm/nouveau: Disable
AGP on PowerPC again.
git bisect bad 650e1203c11354ba84d69ba445abc0efcfe3890a
# bad: [65b5f42e2a9eb9c8383fb67698bf8c27657f8c14] drm/nve0/graph: some
random reg moved on kepler
git bisect bad 65b5f42e2a9eb9c8383fb67698bf8c27657f8c14
lijo@pluto:~/linux/linux$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 5 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC
Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT
540M] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio
Controller (rev a1)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
09:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless
Network Adapter (PCI-Express) (rev 01)
0b:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host
Controller (rev 04)
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 71804 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.0-rc2 (lijo@pluto) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #22 SMP Sat Mar 16 11:25:11 GST 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc2 root=UUID=99546192-52d8-49bd-a5a8-2ba47a41d542 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000ca4e3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca4e4000-0x00000000ca526fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ca527000-0x00000000ca791fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca792000-0x00000000ca966fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ca967000-0x00000000caba6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000caba7000-0x00000000cad67fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cad68000-0x00000000cafacfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafad000-0x00000000cafbafff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cafbb000-0x00000000cafe7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafe8000-0x00000000caffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. Inspiron N5110/0FXK2Y, BIOS A06 05/26/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x12fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0CB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 6 base 12FE00000 mask FFFE00000 uncachable
[ 0.000000] 7 base 130000000 mask FF0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3256MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 3264MB, range: 64MB, type UC
[ 0.000000] reg 4, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 5, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 6, base: 4862MB, range: 2MB, type UC
[ 0.000000] reg 7, base: 4864MB, range: 256MB, type UC
[ 0.000000] total RAM covered: 4022M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 128MB, type WB
[ 0.000000] reg 3, base: 3200MB, range: 64MB, type WB
[ 0.000000] reg 4, base: 3256MB, range: 8MB, type UC
[ 0.000000] reg 5, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 6, base: 4608MB, range: 256MB, type WB
[ 0.000000] reg 7, base: 4862MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xcb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcaba7 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd220-0x000fd22f] mapped at [ffff8800000fd220]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x026fb000, 0x026fbfff] PGTABLE
[ 0.000000] BRK [0x026fc000, 0x026fcfff] PGTABLE
[ 0.000000] BRK [0x026fd000, 0x026fdfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fc00000-0x12fdfffff]
[ 0.000000] [mem 0x12fc00000-0x12fdfffff] page 2M
[ 0.000000] BRK [0x026fe000, 0x026fefff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fbfffff]
[ 0.000000] [mem 0x12c000000-0x12fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xca4e3fff]
[ 0.000000] [mem 0x40200000-0xca3fffff] page 2M
[ 0.000000] [mem 0xca400000-0xca4e3fff] page 4k
[ 0.000000] BRK [0x026ff000, 0x026fffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xca527000-0xca791fff]
[ 0.000000] [mem 0xca527000-0xca791fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xca967000-0xcaba6fff]
[ 0.000000] [mem 0xca967000-0xcaba6fff] page 4k
[ 0.000000] RAMDISK: [mem 0x37988000-0x37cbbfff]
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 DELL)
[ 0.000000] ACPI: XSDT 00000000cafad080 0007C (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000cafb6c58 000F4 (v04 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000cafad188 09ACE (v02 DELL WN09 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cafe3f80 00040
[ 0.000000] ACPI: APIC 00000000cafb6d50 00072 (v03 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000cafb6dc8 0003C (v01 DELL WN09 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cafb6e08 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000cafb72b8 00176 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 00000000cafb7430 00038 (v01 DELL WN09 01072009 AMI. 00000004)
[ 0.000000] ACPI: SSDT 00000000cafb7468 00780 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000cafb7be8 00996 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000cafb8580 00D80 (v01 SgRef SgTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000cafb9300 01821 (v01 OptRef OptTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: OSFR 00000000cafbab28 00086 (v01 DELL M08 07DB051A ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b400000-ffff88012f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xca4e3fff]
[ 0.000000] node 0: [mem 0xca527000-0xca791fff]
[ 0.000000] node 0: [mem 0xca967000-0xcaba6fff]
[ 0.000000] node 0: [mem 0x100000000-0x12fdfffff]
[ 0.000000] On node 0 totalpages: 1024811
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12887 pages used for memmap
[ 0.000000] DMA32 zone: 824719 pages, LIFO batch:31
[ 0.000000] Normal zone: 3064 pages used for memmap
[ 0.000000] Normal zone: 196096 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000ca4e4000 - 00000000ca527000
[ 0.000000] PM: Registered nosave memory: 00000000ca792000 - 00000000ca967000
[ 0.000000] PM: Registered nosave memory: 00000000caba7000 - 00000000cad68000
[ 0.000000] PM: Registered nosave memory: 00000000cad68000 - 00000000cafad000
[ 0.000000] PM: Registered nosave memory: 00000000cafad000 - 00000000cafbb000
[ 0.000000] PM: Registered nosave memory: 00000000cafbb000 - 00000000cafe8000
[ 0.000000] PM: Registered nosave memory: 00000000cafe8000 - 00000000cb000000
[ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cb800000
[ 0.000000] PM: Registered nosave memory: 00000000cb800000 - 00000000cfa00000
[ 0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xcfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fa00000 s87744 r8192 d22848 u524288
[ 0.000000] pcpu-alloc: s87744 r8192 d22848 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1008640
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc2 root=UUID=99546192-52d8-49bd-a5a8-2ba47a41d542 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Memory: 3933240k/4978688k available (6888k kernel code, 879444k absent, 166004k reserved, 6329k data, 1116k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2294.860 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.72 BogoMIPS (lpj=9179440)
[ 0.000012] pid_max: default: 32768 minimum: 301
[ 0.000105] Security Framework initialized
[ 0.000126] AppArmor: AppArmor initialized
[ 0.000153] Mount-cache hash table entries: 256
[ 0.000884] Initializing cgroup subsys cpuacct
[ 0.000898] Initializing cgroup subsys devices
[ 0.000903] Initializing cgroup subsys freezer
[ 0.000922] Initializing cgroup subsys blkio
[ 0.000927] Initializing cgroup subsys perf_event
[ 0.000990] CPU: Physical Processor ID: 0
[ 0.000994] CPU: Processor Core ID: 0
[ 0.001001] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001001] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.001012] mce: CPU supports 7 MCE banks
[ 0.001026] CPU0: Thermal monitoring enabled (TM1)
[ 0.001043] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.001043] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.001043] tlb_flushall_shift: 5
[ 0.001235] Freeing SMP alternatives: 20k freed
[ 0.002553] ACPI: Core revision 20130117
[ 0.015997] ACPI: All ACPI Tables successfully acquired
[ 0.025577] ftrace: allocating 24271 entries in 95 pages
[ 0.038665] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078337] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07)
[ 0.078353] TSC deadline timer enabled
[ 0.078373] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.078386] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.078398] ... version: 3
[ 0.078401] ... bit width: 48
[ 0.078404] ... generic registers: 4
[ 0.078408] ... value mask: 0000ffffffffffff
[ 0.078412] ... max period: 000000007fffffff
[ 0.078416] ... fixed-purpose events: 3
[ 0.078419] ... event mask: 000000070000000f
[ 0.079777] SMP alternatives: lockdep: fixing up alternatives
[ 0.093151] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.079797] smpboot: Booting Node 0, Processors #1
[ 0.093349] SMP alternatives: lockdep: fixing up alternatives
[ 0.093356] #2
[ 0.106725] SMP alternatives: lockdep: fixing up alternatives
[ 0.106735] #3 OK
[ 0.119909] Brought up 4 CPUs
[ 0.119917] smpboot: Total of 4 processors activated (18358.88 BogoMIPS)
[ 0.123838] devtmpfs: initialized
[ 0.124179] EVM: security.selinux
[ 0.124184] EVM: security.SMACK64
[ 0.124187] EVM: security.capability
[ 0.124269] PM: Registering ACPI NVS region [mem 0xca4e4000-0xca526fff] (274432 bytes)
[ 0.124282] PM: Registering ACPI NVS region [mem 0xcad68000-0xcafacfff] (2379776 bytes)
[ 0.124334] PM: Registering ACPI NVS region [mem 0xcafbb000-0xcafe7fff] (184320 bytes)
[ 0.125582] regulator-dummy: no parameters
[ 0.125670] RTC time: 16:06:58, date: 03/16/13
[ 0.125823] NET: Registered protocol family 16
[ 0.126056] ACPI: bus type PCI registered
[ 0.126178] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.126186] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.136017] PCI: Using configuration type 1 for base access
[ 0.137698] bio: create slab <bio-0> at 0
[ 0.137879] ACPI: Added _OSI(Module Device)
[ 0.137884] ACPI: Added _OSI(Processor Device)
[ 0.137888] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.137893] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.143644] ACPI: EC: Look up EC in DSDT
[ 0.149722] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.157030] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.164927] ACPI: SSDT 00000000cad51698 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.166428] ACPI: Dynamic OEM Table Load:
[ 0.166434] ACPI: SSDT (null) 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.166796] ACPI: SSDT 00000000cad52a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.168371] ACPI: Dynamic OEM Table Load:
[ 0.168377] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.168525] ACPI: SSDT 00000000cad50d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.170036] ACPI: Dynamic OEM Table Load:
[ 0.170041] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.170949] ACPI: Interpreter enabled
[ 0.170964] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.171002] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.171006] ACPI: Using IOAPIC for interrupt routing
[ 0.171051] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.212753] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.213009] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.213208] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.213958] PCI host bridge to bus 0000:00
[ 0.213965] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.213970] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.213975] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.213981] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.213986] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.213991] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.213997] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.214002] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.214007] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.214012] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.214018] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
[ 0.214023] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.214062] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.214329] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.214387] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.214504] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.214613] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.214631] pci 0000:00:02.0: reg 10: [mem 0xf6400000-0xf67fffff 64bit]
[ 0.214641] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.214648] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.214890] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.214931] pci 0000:00:16.0: reg 10: [mem 0xf7b0a000-0xf7b0a00f 64bit]
[ 0.215069] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.215282] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.215318] pci 0000:00:1a.0: reg 10: [mem 0xf7b08000-0xf7b083ff]
[ 0.215484] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.218682] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.218764] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.218795] pci 0000:00:1b.0: reg 10: [mem 0xf7b00000-0xf7b03fff 64bit]
[ 0.218941] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.219061] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.219128] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.219280] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.219357] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.219423] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.219580] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.219662] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.219732] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.219885] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.219973] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.220039] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.220190] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.220281] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.220352] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.220504] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.220605] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.220677] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.220713] pci 0000:00:1d.0: reg 10: [mem 0xf7b07000-0xf7b073ff]
[ 0.220876] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.223632] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.223708] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[ 0.223967] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.224008] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.224024] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.224039] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.224054] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.224069] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.224086] pci 0000:00:1f.2: reg 24: [mem 0xf7b06000-0xf7b067ff]
[ 0.224190] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.224357] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.224388] pci 0000:00:1f.3: reg 10: [mem 0xf7b05000-0xf7b050ff 64bit]
[ 0.224431] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.224692] pci 0000:01:00.0: [10de:0df5] type 00 class 0x030000
[ 0.224705] pci 0000:01:00.0: reg 10: [mem 0xf5000000-0xf5ffffff]
[ 0.224717] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.224730] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.224739] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.224748] pci 0000:01:00.0: reg 30: [mem 0xf6000000-0xf607ffff pref]
[ 0.224823] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.224891] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[ 0.224903] pci 0000:01:00.1: reg 10: [mem 0xf6080000-0xf6083fff]
[ 0.225012] pci 0000:01:00.1: System wakeup disabled by ACPI
[ 0.231680] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.231687] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.231690] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
[ 0.231696] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.231809] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.231967] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
[ 0.231997] pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.232046] pci 0000:05:00.0: reg 18: [mem 0xf3204000-0xf3204fff 64bit pref]
[ 0.232077] pci 0000:05:00.0: reg 20: [mem 0xf3200000-0xf3203fff 64bit pref]
[ 0.232214] pci 0000:05:00.0: supports D1 D2
[ 0.232216] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.232281] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.239659] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 0.239690] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.239704] pci 0000:00:1c.1: bridge window [mem 0xf3200000-0xf32fffff 64bit pref]
[ 0.239847] pci 0000:09:00.0: [168c:002b] type 00 class 0x028000
[ 0.239887] pci 0000:09:00.0: reg 10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.240081] pci 0000:09:00.0: supports D1
[ 0.240082] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[ 0.240140] pci 0000:09:00.0: System wakeup disabled by ACPI
[ 0.247666] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 0.247702] pci 0000:00:1c.3: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.247855] pci 0000:0b:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.247894] pci 0000:0b:00.0: reg 10: [mem 0xf7900000-0xf7901fff 64bit]
[ 0.248093] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
[ 0.248153] pci 0000:0b:00.0: System wakeup disabled by ACPI
[ 0.248251] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 0.248265] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.248381] pci 0000:00:1c.7: PCI bridge to [bus 11-1f]
[ 0.248390] pci 0000:00:1c.7: bridge window [io 0xb000-0xcfff]
[ 0.248396] pci 0000:00:1c.7: bridge window [mem 0xf6800000-0xf78fffff]
[ 0.248406] pci 0000:00:1c.7: bridge window [mem 0xf2100000-0xf31fffff 64bit pref]
[ 0.248453] pci_bus 0000:00: on NUMA node 0
[ 0.250187] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.250297] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.250405] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.250511] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.250615] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.250721] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.250829] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.250934] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.251947] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.251961] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.252145] Found 1 acpi root devices
[ 0.252520] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.252534] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.252542] vgaarb: loaded
[ 0.252545] vgaarb: bridge control possible 0000:01:00.0
[ 0.252549] vgaarb: no bridge control possible 0000:00:02.0
[ 0.252817] SCSI subsystem initialized
[ 0.252821] ACPI: bus type ATA registered
[ 0.252912] libata version 3.00 loaded.
[ 0.252945] ACPI: bus type USB registered
[ 0.252977] usbcore: registered new interface driver usbfs
[ 0.252995] usbcore: registered new interface driver hub
[ 0.253037] usbcore: registered new device driver usb
[ 0.253203] PCI: Using ACPI for IRQ routing
[ 0.255218] PCI: pci_cache_line_size set to 64 bytes
[ 0.255311] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.255313] e820: reserve RAM buffer [mem 0xca4e4000-0xcbffffff]
[ 0.255316] e820: reserve RAM buffer [mem 0xca792000-0xcbffffff]
[ 0.255318] e820: reserve RAM buffer [mem 0xcaba7000-0xcbffffff]
[ 0.255321] e820: reserve RAM buffer [mem 0x12fe00000-0x12fffffff]
[ 0.255659] NetLabel: Initializing
[ 0.255664] NetLabel: domain hash size = 128
[ 0.255667] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.255708] NetLabel: unlabeled traffic allowed by default
[ 0.255808] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.255820] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.257832] Switching to clocksource hpet
[ 0.277410] AppArmor: AppArmor Filesystem Enabled
[ 0.277449] pnp: PnP ACPI init
[ 0.277484] ACPI: bus type PNP registered
[ 0.277529] pnp 00:00: [dma 4]
[ 0.277585] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.277627] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.277769] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.277884] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.277891] system 00:03: [io 0x1000-0x100f] has been reserved
[ 0.277896] system 00:03: [io 0xffff] has been reserved
[ 0.277901] system 00:03: [io 0xffff] has been reserved
[ 0.277906] system 00:03: [io 0x0400-0x0453] has been reserved
[ 0.277911] system 00:03: [io 0x0458-0x047f] has been reserved
[ 0.277916] system 00:03: [io 0x0500-0x057f] has been reserved
[ 0.277922] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.277931] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.277985] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.278070] system 00:05: [io 0x0454-0x0457] has been reserved
[ 0.278079] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.278128] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.278200] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.278208] system 00:07: [mem 0xfe800000-0xfe802fff] has been reserved
[ 0.278216] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278273] pnp 00:08: Plug and Play ACPI device, IDs DLL04b0 SYN0600 SYN0002 PNP0f13 (active)
[ 0.278329] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.278781] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.278787] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.278793] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.278799] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.278805] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.278810] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.278816] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.278821] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.278827] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.278833] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.278839] system 00:0a: [mem 0xcfa00000-0xcfa00fff] has been reserved
[ 0.278847] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279148] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 0.279155] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
[ 0.279163] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.279234] pnp: PnP ACPI: found 12 devices
[ 0.279238] ACPI: bus type PNP unregistered
[ 0.287281] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.287289] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.287297] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
[ 0.287304] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.287313] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.287335] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 0.287342] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.287357] pci 0000:00:1c.1: bridge window [mem 0xf3200000-0xf32fffff 64bit pref]
[ 0.287371] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 0.287382] pci 0000:00:1c.3: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.287399] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 0.287409] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.287427] pci 0000:00:1c.7: PCI bridge to [bus 11-1f]
[ 0.287433] pci 0000:00:1c.7: bridge window [io 0xb000-0xcfff]
[ 0.287444] pci 0000:00:1c.7: bridge window [mem 0xf6800000-0xf78fffff]
[ 0.287453] pci 0000:00:1c.7: bridge window [mem 0xf2100000-0xf31fffff 64bit pref]
[ 0.287864] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.287867] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.287869] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.287871] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.287873] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.287875] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.287877] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.287879] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.287881] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.287883] pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff]
[ 0.287885] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 0.287887] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.287889] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
[ 0.287891] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.287894] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.287896] pci_bus 0000:05: resource 2 [mem 0xf3200000-0xf32fffff 64bit pref]
[ 0.287898] pci_bus 0000:09: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.287900] pci_bus 0000:0b: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.287902] pci_bus 0000:11: resource 0 [io 0xb000-0xcfff]
[ 0.287904] pci_bus 0000:11: resource 1 [mem 0xf6800000-0xf78fffff]
[ 0.287906] pci_bus 0000:11: resource 2 [mem 0xf2100000-0xf31fffff 64bit pref]
[ 0.287968] NET: Registered protocol family 2
[ 0.288311] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.288438] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes)
[ 0.290549] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.290605] TCP: reno registered
[ 0.290621] UDP hash table entries: 2048 (order: 6, 327680 bytes)
[ 0.290908] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes)
[ 0.291325] NET: Registered protocol family 1
[ 0.291347] pci 0000:00:02.0: Boot video device
[ 0.529995] PCI: CLS 64 bytes, default 64
[ 0.530144] Trying to unpack rootfs image as initramfs...
[ 0.594089] Freeing initrd memory: 3280k freed
[ 0.594630] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.594641] software IO TLB [mem 0xc64e4000-0xca4e4000] (64MB) mapped at [ffff8800c64e4000-ffff8800ca4e3fff]
[ 0.595040] Scanning for low memory corruption every 60 seconds
[ 0.595541] audit: initializing netlink socket (disabled)
[ 0.595579] type=2000 audit(1363450018.576:1): initialized
[ 0.622769] bounce pool size: 64 pages
[ 0.622795] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.625697] VFS: Disk quotas dquot_6.5.2
[ 0.625762] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.626716] fuse init (API version 7.21)
[ 0.626876] msgmni has been set to 7688
[ 0.627508] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.627596] io scheduler noop registered
[ 0.627601] io scheduler deadline registered (default)
[ 0.627683] io scheduler cfq registered
[ 0.629750] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.629990] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.630192] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.630386] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.630576] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.630772] pcieport 0000:00:1c.7: irq 45 for MSI/MSI-X
[ 0.630981] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.630992] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.630998] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.631005] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.631041] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.631051] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.631087] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.631093] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.631102] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.631136] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.631142] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 0.631151] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.631185] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.631191] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
[ 0.631200] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.631238] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 0.631248] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[ 0.631272] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.631428] pciehp 0000:00:1c.7:pcie04: HPC vendor_id 8086 device_id 1c1e ss_vid 1028 ss_did 4b0
[ 0.631536] pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded
[ 0.631546] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.631693] intel_idle: MWAIT substates: 0x21120
[ 0.631694] intel_idle: v0.4 model 0x2A
[ 0.631696] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.631984] ACPI: AC Adapter [AC] (on-line)
[ 0.632253] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.634136] ACPI: Lid Switch [LID0]
[ 0.634201] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.634236] ACPI: Power Button [PWRB]
[ 0.634294] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.634303] ACPI: Sleep Button [SBTN]
[ 0.634361] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.634369] ACPI: Power Button [PWRF]
[ 0.634491] ACPI: Requesting acpi_cpufreq
[ 0.652717] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.652724] ACPI: Thermal Zone [THM] (61 C)
[ 0.652788] GHES: HEST is not enabled!
[ 0.652928] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.662106] Linux agpgart interface v0.103
[ 0.664702] brd: module loaded
[ 0.666257] loop: module loaded
[ 0.666427] ahci 0000:00:1f.2: version 3.0
[ 0.666606] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.666666] ahci: SSS flag set, parallel bus scan disabled
[ 0.674312] ACPI: Battery Slot [BAT0] (battery present)
[ 0.681699] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
[ 0.681708] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 0.681719] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.698703] scsi0 : ahci
[ 0.698941] scsi1 : ahci
[ 0.699055] scsi2 : ahci
[ 0.699168] scsi3 : ahci
[ 0.699287] scsi4 : ahci
[ 0.699400] scsi5 : ahci
[ 0.699475] ata1: SATA max UDMA/133 abar m2048@0xf7b06000 port 0xf7b06100 irq 46
[ 0.699481] ata2: DUMMY
[ 0.699483] ata3: DUMMY
[ 0.699486] ata4: DUMMY
[ 0.699491] ata5: SATA max UDMA/133 abar m2048@0xf7b06000 port 0xf7b06300 irq 46
[ 0.699498] ata6: SATA max UDMA/133 abar m2048@0xf7b06000 port 0xf7b06380 irq 46
[ 0.700080] libphy: Fixed MDIO Bus: probed
[ 0.700186] tun: Universal TUN/TAP device driver, 1.6
[ 0.700190] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.700298] PPP generic driver version 2.4.2
[ 0.700426] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.700432] ehci-pci: EHCI PCI platform driver
[ 0.700551] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.700555] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.700641] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.700664] ehci-pci 0000:00:1a.0: debug port 2
[ 0.704610] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.704636] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7b08000
[ 0.713660] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.713785] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.713791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.713797] usb usb1: Product: EHCI Host Controller
[ 0.713802] usb usb1: Manufacturer: Linux 3.9.0-rc2 ehci_hcd
[ 0.713806] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.714291] hub 1-0:1.0: USB hub found
[ 0.714319] hub 1-0:1.0: 2 ports detected
[ 0.714810] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.714814] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.714827] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.714850] ehci-pci 0000:00:1d.0: debug port 2
[ 0.718762] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.718785] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7b07000
[ 0.729644] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.729693] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.729699] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.729705] usb usb2: Product: EHCI Host Controller
[ 0.729709] usb usb2: Manufacturer: Linux 3.9.0-rc2 ehci_hcd
[ 0.729714] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.729945] hub 2-0:1.0: USB hub found
[ 0.729954] hub 2-0:1.0: 2 ports detected
[ 0.730139] ehci-platform: EHCI generic platform driver
[ 0.730154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.730184] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.730292] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 0.730304] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
[ 0.730478] xhci_hcd 0000:0b:00.0: irq 16, io mem 0xf7900000
[ 0.730602] xhci_hcd 0000:0b:00.0: irq 47 for MSI/MSI-X
[ 0.730612] xhci_hcd 0000:0b:00.0: irq 48 for MSI/MSI-X
[ 0.730621] xhci_hcd 0000:0b:00.0: irq 49 for MSI/MSI-X
[ 0.730630] xhci_hcd 0000:0b:00.0: irq 50 for MSI/MSI-X
[ 0.730639] xhci_hcd 0000:0b:00.0: irq 51 for MSI/MSI-X
[ 0.730807] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.730813] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.730819] usb usb3: Product: xHCI Host Controller
[ 0.730823] usb usb3: Manufacturer: Linux 3.9.0-rc2 xhci_hcd
[ 0.730828] usb usb3: SerialNumber: 0000:0b:00.0
[ 0.730971] xHCI xhci_add_endpoint called for root hub
[ 0.730973] xHCI xhci_check_bandwidth called for root hub
[ 0.731015] hub 3-0:1.0: USB hub found
[ 0.731053] hub 3-0:1.0: 2 ports detected
[ 0.731209] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 0.731219] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
[ 0.733941] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.733947] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.733953] usb usb4: Product: xHCI Host Controller
[ 0.733957] usb usb4: Manufacturer: Linux 3.9.0-rc2 xhci_hcd
[ 0.733962] usb usb4: SerialNumber: 0000:0b:00.0
[ 0.734100] xHCI xhci_add_endpoint called for root hub
[ 0.734102] xHCI xhci_check_bandwidth called for root hub
[ 0.734150] hub 4-0:1.0: USB hub found
[ 0.734163] hub 4-0:1.0: 2 ports detected
[ 0.734468] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[ 0.737100] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.737143] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.737510] mousedev: PS/2 mouse device common for all mice
[ 0.738115] rtc_cmos 00:04: RTC can wake from S4
[ 0.738377] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.738418] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.738561] device-mapper: uevent: version 1.0.3
[ 0.738708] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 0.738950] cpuidle: using governor ladder
[ 0.739435] cpuidle: using governor menu
[ 0.739439] EFI Variables Facility v0.08 2004-May-17
[ 0.739528] TCP: cubic registered
[ 0.739710] NET: Registered protocol family 10
[ 0.740065] NET: Registered protocol family 17
[ 0.740145] Key type dns_resolver registered
[ 0.740596] PM: Hibernation image not present or could not be loaded.
[ 0.740625] registered taskstats version 1
[ 0.743800] Key type trusted registered
[ 0.746581] Key type encrypted registered
[ 0.750128] Magic number: 5:943:135
[ 0.750151] block ram0: hash matches
[ 0.751007] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.751013] EDD information not available.
[ 0.755505] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.017633] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.020582] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.021027] ata1.00: ATA-8: WDC WD5000BPVT-75HXZT1, 01.01A01, max UDMA/133
[ 1.021053] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.024109] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.024556] ata1.00: configured for UDMA/133
[ 1.025612] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.030231] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-7 01.0 PQ: 0 ANSI: 5
[ 1.030836] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.030845] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.031033] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.031048] sd 0:0:0:0: [sda] Write Protect is off
[ 1.031054] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.031131] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.123155] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.125015] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.158326] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.158351] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.158864] hub 1-1:1.0: USB hub found
[ 1.159045] hub 1-1:1.0: 6 ports detected
[ 1.269505] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.349451] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.351698] ata5.00: ATAPI: HL-DT-STDVD+/-RW GT32N, A203, max UDMA/100
[ 1.355257] ata5.00: configured for UDMA/100
[ 1.360253] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GT32N A203 PQ: 0 ANSI: 5
[ 1.364390] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.364401] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.364845] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.365073] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.402179] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.402210] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.402745] hub 2-1:1.0: USB hub found
[ 1.402910] hub 2-1:1.0: 8 ports detected
[ 1.477660] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.570627] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3002
[ 1.570650] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.593394] tsc: Refined TSC clocksource calibration: 2294.787 MHz
[ 1.593420] Switching to clocksource tsc
[ 1.641577] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[ 1.685291] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.686839] Freeing unused kernel memory: 1116k freed
[ 1.686996] Write protecting the kernel read-only data: 12288k
[ 1.690352] Freeing unused kernel memory: 1296k freed
[ 1.693327] Freeing unused kernel memory: 1216k freed
[ 1.717160] udevd[116]: starting version 175
[ 1.785135] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=6483
[ 1.785149] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.785160] usb 1-1.5: Product: Laptop_Integrated_Webcam_HD
[ 1.785168] usb 1-1.5: Manufacturer: CNFA151H2820400001I2
[ 1.828873] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.829436] r8169 0000:05:00.0: irq 52 for MSI/MSI-X
[ 1.834402] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000020000, 18:03:73:64:43:86, XID 00a00000 IRQ 52
[ 4.631606] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 4.631614] EXT4-fs (sda6): write access will be enabled during recovery
[ 5.456029] EXT4-fs (sda6): recovery complete
[ 5.465125] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 19.296060] Adding 4097020k swap on /dev/sda7. Priority:-1 extents:1 across:4097020k
[ 20.009711] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 20.538080] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 20.701353] udevd[562]: starting version 175
[ 21.002269] wmi: Mapper loaded
[ 21.189614] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130117/utaddress-251)
[ 21.189624] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.189628] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 21.189632] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130117/utaddress-251)
[ 21.189635] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.189637] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 21.189640] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130117/utaddress-251)
[ 21.189643] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.189644] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 21.189647] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130117/utaddress-251)
[ 21.189650] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.189651] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 21.197638] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
[ 21.200782] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
[ 21.202739] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
[ 21.204827] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
[ 21.207329] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 21.328394] mei 0000:00:16.0: setting latency timer to 64
[ 21.328537] mei 0000:00:16.0: irq 53 for MSI/MSI-X
[ 21.384142] input: Dell WMI hotkeys as /devices/virtual/input/input5
[ 21.474112] lp: driver loaded but no devices found
[ 21.678280] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 21.780420] type=1400 audit(1363435639.770:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=769 comm="apparmor_parser"
[ 21.780435] type=1400 audit(1363435639.770:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=662 comm="apparmor_parser"
[ 21.780720] type=1400 audit(1363435639.770:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=769 comm="apparmor_parser"
[ 21.780730] type=1400 audit(1363435639.770:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=662 comm="apparmor_parser"
[ 21.780886] type=1400 audit(1363435639.770:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=769 comm="apparmor_parser"
[ 21.780899] type=1400 audit(1363435639.770:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=662 comm="apparmor_parser"
[ 21.913974] Bluetooth: Core ver 2.16
[ 21.914004] NET: Registered protocol family 31
[ 21.914007] Bluetooth: HCI device and connection manager initialized
[ 21.914075] Bluetooth: HCI socket layer initialized
[ 21.914081] Bluetooth: L2CAP socket layer initialized
[ 21.914093] Bluetooth: SCO socket layer initialized
[ 21.991626] usbcore: registered new interface driver btusb
[ 22.548760] [drm] Initialized drm 1.1.0 20060810
[ 22.771145] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6
[ 22.784119] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7
[ 23.307717] snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
[ 23.856130] cfg80211: Calling CRDA to update world regulatory domain
[ 23.862576] cfg80211: World regulatory domain updated:
[ 23.862580] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 23.862582] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.862584] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 23.862586] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 23.862588] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.862589] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.944565] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 23.944875] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 23.945977] hda_intel: Disabling MSI
[ 23.945988] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 24.544979] [drm] Memory usable by graphics device = 2048M
[ 24.545031] i915 0000:00:02.0: setting latency timer to 64
[ 24.587924] i915 0000:00:02.0: irq 55 for MSI/MSI-X
[ 24.587943] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 24.587944] [drm] Driver supports precise vblank timestamp query.
[ 24.589683] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 24.589685] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 24.606466] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 24.606469] [drm] This can cause pipe underruns and display issues.
[ 24.606470] [drm] Please upgrade your BIOS to fix this.
[ 24.623552] fbcon: inteldrmfb (fb0) is primary device
[ 25.001406] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 25.001615] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 25.001762] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 25.001933] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 25.501149] Console: switching to colour frame buffer device 170x48
[ 25.504113] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 25.504115] i915 0000:00:02.0: registered panic notifier
[ 25.504583] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 25.506261] acpi device:1b: registered as cooling_device4
[ 25.506598] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 25.506971] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input14
[ 25.508693] acpi device:3a: registered as cooling_device5
[ 25.509030] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 25.509152] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
[ 25.509409] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 25.825228] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 27.056580] Bluetooth: Can't change to loading configuration err
[ 27.056659] ath3k: probe of 1-1.4:1.0 failed with error -110
[ 27.056724] usbcore: registered new interface driver ath3k
[ 27.935833] ath: phy0: ASPM enabled: 0x42
[ 27.935837] ath: EEPROM regdomain: 0x60
[ 27.935838] ath: EEPROM indicates we should expect a direct regpair map
[ 27.935840] ath: Country alpha2 being used: 00
[ 27.935841] ath: Regpair used: 0x60
[ 27.935843] cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
[ 27.935845] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935846] cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
[ 27.935848] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935849] cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
[ 27.935850] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935852] cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
[ 27.935853] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935854] cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
[ 27.935856] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935857] cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
[ 27.935858] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935859] cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
[ 27.935861] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935862] cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
[ 27.935863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935864] cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
[ 27.935866] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935867] cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
[ 27.935868] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935870] cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
[ 27.935871] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935872] cfg80211: Updating information on frequency 2467 MHz with regulatory rule:
[ 27.935874] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935875] cfg80211: Updating information on frequency 2472 MHz with regulatory rule:
[ 27.935876] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.935877] cfg80211: Updating information on frequency 2484 MHz with regulatory rule:
[ 27.935879] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.937711] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 28.106998] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 28.107947] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900046a0000, irq=19
[ 28.170781] init: failsafe main process (959) killed by TERM signal
[ 28.345438] type=1400 audit(1363435646.338:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1042 comm="apparmor_parser"
[ 28.347880] type=1400 audit(1363435646.342:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1042 comm="apparmor_parser"
[ 28.348110] type=1400 audit(1363435646.342:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1042 comm="apparmor_parser"
[ 28.445029] type=1400 audit(1363435646.438:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1040 comm="apparmor_parser"
[ 28.445253] type=1400 audit(1363435646.438:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1041 comm="apparmor_parser"
[ 28.445290] type=1400 audit(1363435646.438:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1040 comm="apparmor_parser"
[ 28.445495] type=1400 audit(1363435646.438:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1041 comm="apparmor_parser"
[ 28.445520] type=1400 audit(1363435646.438:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1039 comm="apparmor_parser"
[ 28.445802] type=1400 audit(1363435646.438:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1039 comm="apparmor_parser"
[ 28.525436] type=1400 audit(1363435646.518:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1045 comm="apparmor_parser"
[ 28.554384] r8169 0000:05:00.0 eth0: link down
[ 28.554422] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.573214] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.576879] Bluetooth: RFCOMM TTY layer initialized
[ 28.576901] Bluetooth: RFCOMM socket layer initialized
[ 28.576903] Bluetooth: RFCOMM ver 1.11
[ 28.597571] ppdev: user-space parallel port driver
[ 28.658137] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.658141] Bluetooth: BNEP filters: protocol multicast
[ 28.658151] Bluetooth: BNEP socket layer initialized
[ 29.496305] cgroup: libvirtd (1246) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 29.496422] cgroup: libvirtd (1246) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 29.733799] init: plymouth-stop pre-start process (1434) terminated with status 1
[ 30.515297] wlan0: authenticate with bc:f6:85:c4:64:44
[ 30.538198] wlan0: send auth to bc:f6:85:c4:64:44 (try 1/3)
[ 30.546538] wlan0: authenticated
[ 30.550461] wlan0: associate with bc:f6:85:c4:64:44 (try 1/3)
[ 30.554641] wlan0: RX AssocResp from bc:f6:85:c4:64:44 (capab=0x431 status=0 aid=1)
[ 30.554910] wlan0: associated
[ 30.554932] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 31.407947] MXM: GUID detected in BIOS
[ 31.408216] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 31.408376] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 31.409074] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c1a80a1
[ 31.409078] nouveau [ DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
[ 31.409080] nouveau [ DEVICE][0000:01:00.0] Family : NVC0
[ 31.411906] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 31.421636] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 31.421640] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 31.421699] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 31.421701] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 31.762826] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 31.762830] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
[ 31.762951] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 31.762955] nouveau [ VBIOS][0000:01:00.0] version 70.08.56.00.0a
[ 31.763984] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 31.763987] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 31.878458] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 31.878463] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 31.878465] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 31.909139] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 31.909148] nouveau [ PTHERM][0000:01:00.0] Thermal management: disabled
[ 31.909223] nouveau [ PTHERM][0000:01:00.0] programmed thresholds [ 90(3), 95(3), 105(5), 135(5) ]
[ 31.913512] vga_switcheroo: enabled
[ 31.913970] [TTM] Zone kernel: Available graphics memory: 1970084 kiB
[ 31.913972] [TTM] Initializing pool allocator
[ 31.913995] [TTM] Initializing DMA pool allocator
[ 31.916229] nouveau [ DRM] VRAM: 512 MiB
[ 31.916240] nouveau [ DRM] GART: 512 MiB
[ 31.916245] nouveau [ DRM] TMDS table version 2.0
[ 31.916247] nouveau [ DRM] DCB version 4.0
[ 31.916250] nouveau [ DRM] DCB outp 00: 02011300 00000000
[ 31.916252] nouveau [ DRM] DCB outp 01: 02022362 00020010
[ 31.916254] nouveau [ DRM] DCB conn 00: 00000040
[ 31.916257] nouveau [ DRM] DCB conn 01: 00000100
[ 31.916259] nouveau [ DRM] DCB conn 02: 00001261
[ 31.918240] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 31.918244] [drm] No driver support for vblank timestamp query.
[ 31.918259] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 31.918532] nouveau [ DRM] 3 available performance level(s)
[ 31.918536] nouveau [ DRM] 0: core 50MHz shader 101MHz memory 135MHz voltage 850mV
[ 31.918539] nouveau [ DRM] 1: core 202MHz shader 405MHz memory 324MHz voltage 850mV
[ 31.918542] nouveau [ DRM] 3: core 600MHz shader 1200MHz memory 900MHz voltage 950mV
[ 31.918544] nouveau [ DRM] c: core 202MHz shader 405MHz memory 324MHz voltage 950mV
[ 31.924360] nouveau [ DRM] MM: using COPY1 for buffer copies
[ 31.926493] nouveau 0000:01:00.0: No connectors reported connected with modes
[ 31.926497] [drm] Cannot find any crtc or sizes - going 1024x768
[ 31.961255] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff880118da2400
[ 31.961424] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[ 31.961430] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 1
[ 107.634890]
[ 107.634894] =============================================
[ 107.634896] [ INFO: possible recursive locking detected ]
[ 107.634897] 3.9.0-rc2 #22 Not tainted
[ 107.634898] ---------------------------------------------
[ 107.634900] kworker/0:1/54 is trying to acquire lock:
[ 107.634901] (&dmac->lock){+.+...}, at: [<ffffffffa05fffb3>] evo_wait+0x43/0xf0 [nouveau]
[ 107.634923]
[ 107.634923] but task is already holding lock:
[ 107.634924] (&dmac->lock){+.+...}, at: [<ffffffffa05fffb3>] evo_wait+0x43/0xf0 [nouveau]
[ 107.634937]
[ 107.634937] other info that might help us debug this:
[ 107.634938] Possible unsafe locking scenario:
[ 107.634938]
[ 107.634940] CPU0
[ 107.634941] ----
[ 107.634941] lock(&dmac->lock);
[ 107.634943] lock(&dmac->lock);
[ 107.634945]
[ 107.634945] *** DEADLOCK ***
[ 107.634945]
[ 107.634946] May be due to missing lock nesting notation
[ 107.634946]
[ 107.634948] 5 locks held by kworker/0:1/54:
[ 107.634949] #0: (events){.+.+.+}, at: [<ffffffff8106e311>] process_one_work+0x171/0x4c0
[ 107.634954] #1: ((&nv_connector->hpd_work)){+.+.+.}, at: [<ffffffff8106e311>] process_one_work+0x171/0x4c0
[ 107.634958] #2: (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffffa022ee2a>] drm_modeset_lock_all+0x2a/0x70 [drm]
[ 107.634970] #3: (&crtc->mutex){+.+.+.}, at: [<ffffffffa022ee54>] drm_modeset_lock_all+0x54/0x70 [drm]
[ 107.634978] #4: (&dmac->lock){+.+...}, at: [<ffffffffa05fffb3>] evo_wait+0x43/0xf0 [nouveau]
[ 107.634990]
[ 107.634990] stack backtrace:
[ 107.634992] Pid: 54, comm: kworker/0:1 Not tainted 3.9.0-rc2 #22
[ 107.634994] Call Trace:
[ 107.634998] [<ffffffff810b71e5>] __lock_acquire+0x715/0x1be0
[ 107.635006] [<ffffffffa056361c>] ? dcb_table+0x1ac/0x2a0 [nouveau]
[ 107.635008] [<ffffffff810b8c31>] lock_acquire+0xa1/0x130
[ 107.635019] [<ffffffffa05fffb3>] ? evo_wait+0x43/0xf0 [nouveau]
[ 107.635023] [<ffffffff816aac59>] ? mutex_lock_nested+0x299/0x340
[ 107.635026] [<ffffffff816aaa09>] mutex_lock_nested+0x49/0x340
[ 107.635036] [<ffffffffa05fffb3>] ? evo_wait+0x43/0xf0 [nouveau]
[ 107.635038] [<ffffffff810b954f>] ? mark_held_locks+0xaf/0x110
[ 107.635047] [<ffffffffa05fffb3>] evo_wait+0x43/0xf0 [nouveau]
[ 107.635056] [<ffffffffa0602a63>] nv50_display_flip_next+0x713/0x7a0 [nouveau]
[ 107.635059] [<ffffffff816ab95e>] ? mutex_unlock+0xe/0x10
[ 107.635068] [<ffffffffa0600097>] ? evo_kick+0x37/0x40 [nouveau]
[ 107.635077] [<ffffffffa0602cee>] nv50_crtc_commit+0x10e/0x230 [nouveau]
[ 107.635081] [<ffffffffa0158125>] drm_crtc_helper_set_mode+0x365/0x510 [drm_kms_helper]
[ 107.635085] [<ffffffffa015953e>] drm_crtc_helper_set_config+0xa4e/0xb70 [drm_kms_helper]
[ 107.635092] [<ffffffffa022fe71>] drm_mode_set_config_internal+0x31/0x70 [drm]
[ 107.635095] [<ffffffffa0157621>] drm_fb_helper_set_par+0x71/0xf0 [drm_kms_helper]
[ 107.635102] [<ffffffffa022eaa2>] ? drm_modeset_unlock_all+0x52/0x60 [drm]
[ 107.635105] [<ffffffffa0157581>] drm_fb_helper_hotplug_event+0x81/0xb0 [drm_kms_helper]
[ 107.635116] [<ffffffffa05e964c>] nouveau_fbcon_output_poll_changed+0x1c/0x20 [nouveau]
[ 107.635119] [<ffffffffa0157bbb>] drm_kms_helper_hotplug_event+0x2b/0x40 [drm_kms_helper]
[ 107.635122] [<ffffffffa0158ada>] drm_helper_hpd_irq_event+0x12a/0x140 [drm_kms_helper]
[ 107.635131] [<ffffffffa05ec323>] nouveau_connector_hotplug_work+0x93/0x100 [nouveau]
[ 107.635134] [<ffffffff8106e371>] process_one_work+0x1d1/0x4c0
[ 107.635135] [<ffffffff8106e311>] ? process_one_work+0x171/0x4c0
[ 107.635138] [<ffffffff8106fd0f>] worker_thread+0x10f/0x380
[ 107.635140] [<ffffffff8106fc00>] ? busy_worker_rebind_fn+0xb0/0xb0
[ 107.635142] [<ffffffff8107aaca>] kthread+0xea/0xf0
[ 107.635144] [<ffffffff8107a9e0>] ? kthread_create_on_node+0x160/0x160
[ 107.635147] [<ffffffff816b80ac>] ret_from_fork+0x7c/0xb0
[ 107.635148] [<ffffffff8107a9e0>] ? kthread_create_on_node+0x160/0x160
next reply other threads:[~2013-03-16 18:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-16 18:29 Lijo Antony [this message]
2013-03-17 16:38 ` [3.9.0-rc2] nouveau deadlock when HDMI TV is connected Lijo Antony
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5144BA1E.7000203@gmail.com \
--to=lijo.kernel@gmail.com \
--cc=airlied@linux.ie \
--cc=bskeggs@redhat.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.