From: Antti Palosaari <crope@iki.fi>
To: LMML <linux-media@vger.kernel.org>
Subject: Re: [GIT PULL] IT913X
Date: Mon, 18 Mar 2013 23:04:17 +0200 [thread overview]
Message-ID: <51478151.5070702@iki.fi> (raw)
In-Reply-To: <51477002.2000605@iki.fi>
I rebased it as Mauro just committed some stuff that causes merge conflict!
Antti
On 03/18/2013 09:50 PM, Antti Palosaari wrote:
> That patch serie adds new silicon RF-tuner driver named IT913X and
> IT9135 support for existing AF9035/AF9033 drivers. IT913X driver is
> split out from the existing IT9135 driver.
>
> IT913X serie is successor of AF903X serie. Difference is integrated
> RF-tuner. Also those two letters has changed from AF to IT as Afatech
> was bought by ITE Tech.
>
> Logically there is three "chips", as always in case of DTV USB device:
> * USB-interface
> * demodulator
> * RF-tuner
>
> These are sold as following chip names and integrated combinations:
> * AF9032 = demodulator ?
> * AF9033 = demodulator
> * AF9035 = USB-interface + demodulator
> * IT9133 = demodulator + RF-tuner
> * IT9135 = USB-interface + demodulator + RF-tuner
> * IT9137 = IT9135 + MPEG TS input for connecting extra IT9133
>
>
> regards
> Antti
>
>
> The following changes since commit
> 4ca286610f664acf3153634f3930acd2de993a9f:
>
> [media] radio-rtrack2: fix mute bug (2013-03-05 15:20:07 -0300)
>
> are available in the git repository at:
>
> git://linuxtv.org/anttip/media_tree.git it9135_tuner
>
> for you to fetch changes up to 17f64e21efadad3da1744feec97a12d97df15765:
>
> MAINTAINERS: add drivers/media/tuners/it913x* (2013-03-10 03:58:13
> +0200)
>
> ----------------------------------------------------------------
> Antti Palosaari (41):
> ITE IT913X silicon tuner driver
> af9033: support for it913x tuners
> af9035: add support for 1st gen it9135
> af9035: add auto configuration heuristic for it9135
> af9035: fix af9033 demod sampling frequency
> af9015: reject device TerraTec Cinergy T Stick Dual RC (rev. 2)
> af9035: [0ccd:0099] TerraTec Cinergy T Stick Dual RC (rev. 2)
> af9035: constify clock tables
> af9035: USB1.1 support (== PID filters)
> af9035: merge af9035 and it9135 eeprom read routines
> af9035: basic support for IT9135 v2 chips
> af9033: IT9135 v2 supported related changes
> af9035: IT9135 dual tuner related changes
> it913x: merge it913x_fe_start() to it913x_init_tuner()
> it913x: merge it913x_fe_suspend() to it913x_fe_sleep()
> it913x: rename functions and variables
> it913x: tuner power up routines
> it913x: get rid of it913x config struct
> it913x: remove unused variables
> it913x: include tuner IDs from af9033.h
> it913x: use dev_foo() logging
> af9033: add IT9135 demod reg init tables
> it913x: remove demod init reg tables
> af9035: select firmware loader according to firmware
> af9035: use already detected eeprom base addr
> af9035: set demod TS mode config in read_config()
> af9035: enable remote controller for IT9135 too
> af9035: change dual mode boolean to bit field
> af9033: add IT9135 tuner config "38" init table
> af9033: add IT9135 tuner config "51" init table
> af9033: add IT9135 tuner config "52" init table
> af9033: add IT9135 tuner config "60" init table
> af9033: add IT9135 tuner config "61" init table
> af9033: add IT9135 tuner config "62" init table
> it913x: remove unused af9033 demod tuner config inits
> af9033: move code from it913x to af9033
> af9033: sleep on attach()
> af9033: implement i/o optimized reg table writer
> af9035: check I/O errors on IR polling
> af9035: style changes for remote controller polling
> MAINTAINERS: add drivers/media/tuners/it913x*
>
> MAINTAINERS | 10 +
> drivers/media/dvb-frontends/af9033.c | 138 ++++++++++---
> drivers/media/dvb-frontends/af9033.h | 15 ++
> drivers/media/dvb-frontends/af9033_priv.h | 1506
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
>
> drivers/media/tuners/Kconfig | 7 +
> drivers/media/tuners/Makefile | 1 +
> drivers/media/tuners/it913x.c | 447
> ++++++++++++++++++++++++++++++++++++++++
> drivers/media/tuners/it913x.h | 45 ++++
> drivers/media/tuners/it913x_priv.h | 78 +++++++
> drivers/media/usb/dvb-usb-v2/Kconfig | 1 +
> drivers/media/usb/dvb-usb-v2/af9015.c | 40 +++-
> drivers/media/usb/dvb-usb-v2/af9035.c | 545
> ++++++++++++++++++++++++++++++++-----------------
> drivers/media/usb/dvb-usb-v2/af9035.h | 47 +++--
> 13 files changed, 2654 insertions(+), 226 deletions(-)
> create mode 100644 drivers/media/tuners/it913x.c
> create mode 100644 drivers/media/tuners/it913x.h
> create mode 100644 drivers/media/tuners/it913x_priv.h
>
--
http://palosaari.fi/
next prev parent reply other threads:[~2013-03-18 21:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-18 19:50 [GIT PULL] IT913X Antti Palosaari
2013-03-18 21:04 ` Antti Palosaari [this message]
2013-03-18 22:42 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51478151.5070702@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.