On 3/20/2013 1:54 PM, Denys Dmytriyenko wrote: > On Wed, Mar 20, 2013 at 01:48:21PM -0400, Steven Grunza wrote: >> On 3/20/2013 11:17 AM, Denys Dmytriyenko wrote: >>> On Wed, Mar 20, 2013 at 10:23:34AM -0400, Steven Grunza wrote: >>>> On 3/19/2013 2:27 PM, Denys Dmytriyenko wrote: >>>>> On Tue, Mar 19, 2013 at 02:08:52PM -0400, Steven Grunza wrote: >>>>>> On 3/19/2013 1:21 PM, Denys Dmytriyenko wrote: >>>>>>> On Tue, Mar 19, 2013 at 10:18:33AM -0400, Steven Grunza wrote: >>>>>>>> Hello, >>>>>>>> I have a LogicPD Zoom AM3517 experimenters board. Is this the >>>>>>>> correct list to ask questions about getting Yocto-based software >>>>>>>> running on this board? >>>>>>> Yes, this is one of the correct lists for asking questions about AM3517 board >>>>>>> when used with the Yocto Project. :) As this is the mailing list for meta-ti, >>>>>>> which is the official Texas Instruments BSP layer for OpenEmbedded-Core and >>>>>>> the Yocto Project, and AM3517 is currently one of the supported platforms in >>>>>>> meta-ti. >>>>>>> >>>>>> Wonderful. Can someone point me to information so that I can build >>>>>> a system using the Yocto project and program an SD card with the >>>>>> necessary files to boot my board into Linux? >>>>>> >>>>>> With all of the S7 DIP switches in the off position (which the >>>>>> AM3517 Development Kits User Manual indicates is the default boot >>>>> >from NAND) I don't get any output from the serial UART so my guess >>>>>> is that I've hosed the NAND. >>>>>> >>>>>> For debugging support I have a TI Stellaris LM3S8962 board which >>>>>> has the ability to act as a JTAG debugger to external hardware. For >>>>>> software I have OpenOCD 0.6.1 >>>>> I would assume you already checked this Hardware Setup page: >>>>> http://processors.wiki.ti.com/index.php/GSG:_AM35x_EVM_Hardware_Setup >>>>> >>>>> Then you would need to check the Boot from SD/MMC page: >>>>> http://processors.wiki.ti.com/index.php/AM35x_EVM_Boot_from_SD/MMC_card >>>>> >>>>> As of the software load, you can build a minimal rootfs image (e.g. >>>>> core-image-minimal) with all the BSP components and setup an SD card as >>>>> described above. You'll get the MLO, u-boot, uImage and rootfs as the >>>>> output of the build, that you need to load on to the card. >>>> To what should I have MACHINE set? Using beagleboard didn't work. >>> There is "am3517-evm" machine in meta-ti: >>> http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/tree/conf/machine >>> >> What is the proper way to include the above file in my build >> environment or is there a URL describing it that I've missed? > You need to add meta-ti layer to your configuration. It can be as easy as > git-cloning it into your sources location, along with other "meta" layers and > adding it to your bblayers.conf file. You'd need to also add BBMASK to your > local.conf, as described in meta-ti README file. After that you can build for > MACHINE=am3517-evm > I did something wrong or missed a step. I got: grunzasr@stm32dbg:/home/yocto/poky-danny-8.0/build$ bitbake core-image-sato-sdk Pseudo is not present but is required, building this first before the main build Parsing recipes: 100% |#####################################################################################################| Time: 00:02:17 Parsing of 899 .bb files complete (0 cached, 899 parsed). 1205 targets, 67 skipped, 7 masked, 0 errors. ERROR: No recipes available for: /home/yocto/poky-danny-8.0/meta-ti/recipes-graphics/mesa/mesa-dri_9.0.2.bbappend ERROR: Command execution failed: Exited with 1 I put the meta-ti (via a git clone) into /home/yocto/poky-danny-8.0 grunzasr@stm32dbg:/home/yocto/poky-danny-8.0/build$ ls -l /home/yocto/poky-danny-8.0 total 72 drwxrwxr-x 6 grunzasr grunzasr 4096 Oct 22 19:03 bitbake drwxrwxr-x 6 grunzasr grunzasr 4096 Mar 20 14:11 build drwxrwxr-x 11 grunzasr grunzasr 4096 Oct 22 19:03 documentation -rw-rw-r-- 1 grunzasr grunzasr 545 Oct 22 19:03 LICENSE drwxrwxr-x 21 grunzasr grunzasr 4096 Oct 22 19:03 meta drwxrwxr-x 4 grunzasr grunzasr 4096 Oct 22 19:03 meta-hob drwxrwxr-x 5 grunzasr grunzasr 4096 Oct 22 19:03 meta-skeleton drwxr-xr-x 12 grunzasr grunzasr 4096 Mar 20 14:04 meta-ti drwxrwxr-x 6 grunzasr grunzasr 4096 Oct 22 19:03 meta-yocto drwxrwxr-x 9 grunzasr grunzasr 4096 Oct 22 19:03 meta-yocto-bsp -rwxrwxr-x 1 grunzasr grunzasr 1531 Oct 22 19:03 oe-init-build-env -rw-rw-r-- 1 grunzasr grunzasr 2038 Oct 22 19:03 README -rw-rw-r-- 1 grunzasr grunzasr 17245 Oct 22 19:03 README.hardware drwxrwxr-x 8 grunzasr grunzasr 4096 Oct 22 19:03 scripts Is there another meta package I need?