Re: Building custom Linux kernel with own layer

[Bruce Ashfield <bruce.ashfield@windriver.com>]

On 13-03-20 03:35 PM, Bryan Evenson wrote:
>
>
>> -----Original Message-----
>> From: Bruce Ashfield [mailto:bruce.ashfield@gmail.com]
>> Sent: Wednesday, March 20, 2013 1:02 PM
>> To: Bryan Evenson
>> Cc: poky@yoctoproject.org
>> Subject: Re: [poky] Building custom Linux kernel with own layer
>>
>> On Wed, Mar 20, 2013 at 11:59 AM, Bryan Evenson
>> <bevenson@melinkcorp.com> wrote:
>>> I have an Atmel AT91SAM9G25 based board and have been using the
>> Classic OpenEmbedded development tree for my device.  I am working on
>> switching to using the Poky distribution.  I found a Yocto layer that
>> someone else had started here: https://github.com/baseapp/meta-
>> atmel/tree/yocto.  I would like to use this layer as a starting point
>> and go from there.  The layer looks to be setup to build kernel 2.6.39
>> (as that is the kernel I am currently using), but that's not what's
>> happening on my system.  I would like some help in figuring out what
>> needs to change with the layer or my setup to build the 2.6.39 kernel.
>>>
>>> I am using the stable poky-danny-8.0 release (downloaded tarball).
>> Under the poky-danny-8.0 folder, I cloned the meta-atmel layer that I
>> referred to above.  I changed my bblayers.conf to include the meta-
>> atmel layer.  When I bitbake linux-yocto, here's what I see for my
>> build configuration:
>>>
>>> Build Configuration:
>>> BB_VERSION        = "1.16.0"
>>> TARGET_ARCH       = "arm"
>>> TARGET_OS         = "linux-gnueabi"
>>> MACHINE           = "qemuarm"
>>> DISTRO            = "poky"
>>> DISTRO_VERSION    = "1.3"
>>> TUNE_FEATURES     = "armv5 dsp thumb arm926ejs"
>>> TARGET_FPU        = "soft"
>>> meta
>>> meta-yocto
>>> meta-yocto-bsp    = "<unknown>:<unknown>"
>>> meta-atmel        = "yocto:80336b72180283bfd5cf5f674e8c1081deede72a"
>>>
>>> and it builds
>> 3.4.11+git1+a201268353c030d9fafe00f2041976f7437d9386_1+8ee53c3b82ada3cd
>> fd7d25f07d3975834ac9a9b2-r4.3.  From looking at the meta-atmel layer, I
>> think it should be overriding the linux-yocto settings from the other
>> layers.   What am I missing?
>>
>> You need to set the preferred provider for your BSP to be your linux-
>> custom recipe (or whatever you call it, you don't need to leave it
>> called 'linux-yocto-custom').
>> If you've done that, and are still seeing 3.4.x in the version number,
>> chances are the recipe simply isn't overriding the right variables ..
>> and a peek at the recipe would figure that out quickly.
>>
>> Bruce
>
> Bruce,
>
> The preferred provider was setup for the BSP already.  But, with the pointers I tracked down the problems.  First, with the way everything was named in the layer I needed to call "bitbake linux-yocto-custom", not "bitbake linux-yocto".  Then I'd made a mistake in specifying the MACHINE in my local.conf file.  The machine I'm using from the meta-atmel layer is the at91sam9g25ek machine.  I'd correctly put the line "MACHINE ?= at91sam9g25ek" in my local.conf file.  However, I forgot to comment out the line earlier in the file that was setting the machine to qemuarm.  Once I got those two fixes sorted out, it's now building a 2.6.39 kernel like I wanted.

Good news. Glad to hear it is up and running.

Cheers,

Bruce

>
> Thanks,
> Bryan
>
>>
>>>
>>> Thanks,
>>> Bryan
>>> _______________________________________________
>>> poky mailing list
>>> poky@yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/poky
>>
>>
>>
>> --
>> "Thou shalt not follow the NULL pointer, for chaos and madness await
>> thee at its end"
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
>