Re: defxx: skb_push() failing?

[David Oostdyk <daveo@ll.mit.edu>]

On 03/26/13 11:15, Eric Dumazet wrote:
> On Tue, 2013-03-26 at 10:29 -0400, David Oostdyk wrote:
>> Hello,
>>
>> In dfx_xmt_queue_pkt() in defxx.c, there is a skb_push(3) call which
>> makes room for 3 packet request header bytes.  There is some discussion
>> in the driver explaining why those three bytes will be available.  I
>> have an old FDDI card that I'm trying to bring up:
>>
>> 05:05.0 FDDI network controller: Digital Equipment Corporation
>> PCI-to-PDQ Interface Chip [PFI] (rev 02)
>>
>> Most skbuffs that come through dfx_xmit_queue_pkt() have 11 bytes
>> between skb->head and skb->data.  On the other hand, at almost exactly
>> 60-second intervals, an skb arrives that has zero bytes between
>> skb->head and skb->data.  This normally causes a kernel panic, and for
>> the time I just skip over such skb's.
>>
>> Does anyone have advice on where I should start digging to find the
>> cause of this?
>>
> Have you read comments in defxx.c file around line 151 ?
>
> If one skb arrives with not enough headroom, you could add a
>
> WARN_ON_ONCE(skb_headroom(skb) < 3);
>
> and report stack trace so that we can identify and fix the caller.
>
>
>

I have read the comments, and alloc_fddidev() seems to set the 
hard_header_len as described.

As for the stack trace, thanks for the tip!  Here is the output 
(including various defxx debug statements):

[  350.312482] defxx: v1.10 2006/12/14  Lawrence V. Stefani and others
[  350.312582] In dfx_driver_init...
[  350.312583] In dfx_bus_init...
[  350.312585] In dfx_bus_config_check...
[  351.699416] 0000:05:05.0: DEFPA at addr = 0xf9eeff80, IRQ = 26, 
Hardware addr = 00-60-b0-58-48-53
[  351.699425] 0000:05:05.0: Descriptor block virt = FFFF8800CB834000, 
phys = CB834000
[  351.699426] 0000:05:05.0: Command Request buffer virt = 
FFFF8800CB835380, phys = CB835380
[  351.699427] 0000:05:05.0: Command Response buffer virt = 
FFFF8800CB835580, phys = CB835580
[  351.699428] 0000:05:05.0: Receive buffer block virt = 
FFFF8800CB835780, phys = CB835780
[  351.699429] 0000:05:05.0: Consumer block virt = FFFF8800CB835780, 
phys = CB835780
[  351.700049] 0000:05:05.0: registered as fddi0
[  351.756194] In dfx_open...
[  351.756215] In dfx_adap_init...
[  353.927747] fddi0: Multicast address table updated!  Added 1 addresses.
[  353.930352] fddi0: Adapter filters updated!
[  353.975887] fddi0: Multicast address table updated!  Added 1 addresses.
[  353.978492] fddi0: Adapter filters updated!
[  354.043455] fddi0: Multicast address table updated!  Added 2 addresses.
[  354.046359] fddi0: Adapter filters updated!
[  354.097315] fddi0: Multicast address table updated!  Added 3 addresses.
[  354.099919] fddi0: Adapter filters updated!
[  354.204301] fddi0: Multicast address table updated!  Added 3 addresses.
[  354.207107] fddi0: Adapter filters updated!
[  354.257972] fddi0: Multicast address table updated!  Added 3 addresses.
[  354.261577] fddi0: Adapter filters updated!
[  362.976038] ------------[ cut here ]------------
[  362.976044] WARNING: at drivers/net/fddi/defxx.c:3202 
dfx_xmt_queue_pkt+0xa2/0x2f2 [defxx]()
[  362.976046] Hardware name: Precision WorkStation 490
[  362.976047] Modules linked in: defxx snd_hda_codec_idt snd_hda_intel 
snd_hda_codec snd_hwdep snd_pcm iTCO_wdt snd_page_alloc lpc_ich 
snd_timer mfd_core i5000_edac rng_core i2c_i801 fddi rtc_cmos [last 
unloaded: defxx]
[  362.976066] Pid: 1773, comm: aoe_tx Tainted: G          I 
3.7.10-hippi+ #6
[  362.976068] Call Trace:
[  362.976076]  [<ffffffff810357e7>] warn_slowpath_common+0x7e/0x96
[  362.976080]  [<ffffffff81035814>] warn_slowpath_null+0x15/0x17
[  362.976083]  [<ffffffffa0063213>] dfx_xmt_queue_pkt+0xa2/0x2f2 [defxx]
[  362.976088]  [<ffffffff813c3401>] ? map_single+0x45/0x45
[  362.976093]  [<ffffffff819175a8>] dev_hard_start_xmit+0x288/0x398
[  362.976097]  [<ffffffff81929d1c>] sch_direct_xmit+0x72/0x19b
[  362.976100]  [<ffffffff819179ec>] dev_queue_xmit+0x145/0x339
[  362.976105]  [<ffffffff8184ab20>] tx+0x1c/0x42
[  362.976108]  [<ffffffff818489a2>] kthread+0x5e/0xbf
[  362.976113]  [<ffffffff81056451>] ? try_to_wake_up+0x239/0x239
[  362.976116]  [<ffffffff81848944>] ? rexmit_timer+0x349/0x349
[  362.976119]  [<ffffffff8104c678>] kthread+0xb5/0xbd
[  362.976122]  [<ffffffff8104c5c3>] ? __kthread_parkme+0x67/0x67
[  362.976127]  [<ffffffff81a314ec>] ret_from_fork+0x7c/0xb0
[  362.976129]  [<ffffffff8104c5c3>] ? __kthread_parkme+0x67/0x67
[  362.976131] ---[ end trace ce553e95611628f3 ]---


Thanks again for any help!