From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Marek Marczykowski <marmarek@invisiblethingslab.com>
Cc: "xen-devel@lists.xen.org" <xen-devel@lists.xen.org>,
Jan Beulich <JBeulich@suse.com>,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: Re: High CPU temp, suspend problem - xen 4.1.5-pre, linux 3.7.x
Date: Tue, 26 Mar 2013 17:54:29 +0000 [thread overview]
Message-ID: <5151E0D5.3050707@citrix.com> (raw)
In-Reply-To: <5151DE1C.1020307@invisiblethingslab.com>
>> Can you replace the ASSERT() with code similar to that in
>>
>> http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/arch/x86/irq.c;h=5e0f463c381750090373dabd8967635bc297d457;hb=refs/heads/staging#l668
>>
>> Which should call dump_irqs() in before dying because of the ASSERT.
>> You might need to also take the latest version of dump_irqs() from
>> unstable, as I seem to remember there was another assertion failure due
>> to xfree()'ing in IRQ context.
> Full log here:
> http://duch.mimuw.edu.pl/~marmarek/qubes/xen-4.1-failed-resume-dump-irqs.log
> Interesting part:
> (XEN) *** IRQ BUG found ***
> (XEN) CPU0 -Testing vector 233 from bitmap
> 39,47,63-65,72,80,88,96,98,112,120,125,144,152,160,168,174,182-183,190,192,198,200,208,214,222
> (XEN) Guest interrupt information:
> (XEN) IRQ: 0 affinity:00000000,00000000,00000000,00000001 vec:f0
> type=IO-APIC-edge status=00000000 mapped, unbound
> (XEN) IRQ: 1 affinity:00000000,00000000,00000000,00000002 vec:c6
> type=IO-APIC-edge status=00000050 in-flight=0 domain-list=0: 1(-S--),
> (XEN) IRQ: 2 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:e2
> type=XT-PIC status=00000000 mapped, unbound
> (XEN) IRQ: 3 affinity:00000000,00000000,00000000,00000001 vec:40
> type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 4 affinity:00000000,00000000,00000000,00000001 vec:f1
> type=IO-APIC-edge status=00000000 mapped, unbound
> (XEN) IRQ: 5 affinity:00000000,00000000,00000000,00000001 vec:48
> type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 6 affinity:00000000,00000000,00000000,00000001 vec:50
> type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 7 affinity:00000000,00000000,00000000,00000001 vec:58
> type=IO-APIC-edge status=00000050 in-flight=0 domain-list=0: 7(-S--),
> (XEN) IRQ: 8 affinity:00000000,00000000,00000000,00000001 vec:60
> type=IO-APIC-edge status=00000050 in-flight=0 domain-list=0: 8(-S--),
> (XEN) IRQ: 9 affinity:00000000,00000000,00000000,00000001 vec:de
> type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 9(-S--),
> (XEN) IRQ: 10 affinity:00000000,00000000,00000000,00000001 vec:70
> type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 11 affinity:00000000,00000000,00000000,00000001 vec:78
> type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 12 affinity:00000000,00000000,00000000,00000001 vec:27
> type=IO-APIC-edge status=00000050 in-flight=0 domain-list=0: 12(-S--),
> (XEN) IRQ: 13 affinity:00000000,00000000,00000000,0000000f vec:90
> type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 14 affinity:00000000,00000000,00000000,00000001 vec:98
> type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 15 affinity:00000000,00000000,00000000,00000001 vec:a0
> type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 16 affinity:00000000,00000000,00000000,00000001 vec:2f
> type=IO-APIC-level status=00000050 in-flight=0 domain-list=0: 16(-S--),
> (XEN) IRQ: 17 affinity:00000000,00000000,00000000,00000001 vec:3f
> type=IO-APIC-level status=00000050 in-flight=0 domain-list=0: 17(-S--),
> (XEN) IRQ: 18 affinity:00000000,00000000,00000000,00000008 vec:41
> type=IO-APIC-level status=00000002 mapped, unbound
> (XEN) IRQ: 19 affinity:00000000,00000000,00000000,0000000f vec:c8
> type=IO-APIC-level status=00000002 mapped, unbound
> (XEN) IRQ: 20 affinity:00000000,00000000,00000000,00000002 vec:b7
> type=IO-APIC-level status=00000050 in-flight=0 domain-list=0: 20(-S--),
> (XEN) IRQ: 22 affinity:00000000,00000000,00000000,0000000f vec:62
> type=IO-APIC-level status=00000002 mapped, unbound
> (XEN) IRQ: 23 affinity:00000000,00000000,00000000,0000000f vec:a8
> type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 24 affinity:00000000,00000000,00000000,00000001 vec:28
> type=DMA_MSI status=00000000 mapped, unbound
> (XEN) IRQ: 25 affinity:00000000,00000000,00000000,00000001 vec:30
> type=DMA_MSI status=00000000 mapped, unbound
> (XEN) IRQ: 26 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:6f
> type=PCI-MSI status=00000042 mapped, unbound
> (XEN) IRQ: 27 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:77
> type=PCI-MSI status=00000042 mapped, unbound
> (XEN) IRQ: 28 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:7f
> type=PCI-MSI status=00000042 mapped, unbound
> (XEN) IRQ: 29 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:87
> type=PCI-MSI status=00000042 mapped, unbound
> (XEN) IRQ: 31 affinity:00000000,00000000,00000000,00000002 vec:a6
> type=PCI-MSI status=00000002 mapped, unbound
> (XEN) IRQ: 32 affinity:00000000,00000000,00000000,00000001 vec:47
> type=PCI-MSI status=00000050 in-flight=0 domain-list=0:273(-S--),
> (XEN) IRQ: 33 affinity:00000000,00000000,00000000,00000002 vec:5f
> type=PCI-MSI status=00000010 in-flight=0 domain-list=0:272(PS--),
> (XEN) IRQ: 34 affinity:00000000,00000000,00000000,00000001 vec:67
> type=PCI-MSI status=00000010 in-flight=0 domain-list=0:271(-S--),
> (XEN) IRQ: 35 affinity:00000000,00000000,00000000,00000001 vec:4f
> type=PCI-MSI status=00000050 in-flight=0 domain-list=1: 55(-S--),
> (XEN) IO-APIC interrupt information:
> (XEN) IRQ 0 Vec240:
> (XEN) Apic 0x00, Pin 2: vec=f0 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 1 Vec198:
> (XEN) Apic 0x00, Pin 1: vec=c6 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 3 Vec 64:
> (XEN) Apic 0x00, Pin 3: vec=40 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 4 Vec241:
> (XEN) Apic 0x00, Pin 4: vec=f1 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 5 Vec 72:
> (XEN) Apic 0x00, Pin 5: vec=48 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 6 Vec 80:
> (XEN) Apic 0x00, Pin 6: vec=50 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 7 Vec 88:
> (XEN) Apic 0x00, Pin 7: vec=58 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 8 Vec 96:
> (XEN) Apic 0x00, Pin 8: vec=60 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 9 Vec222:
> (XEN) Apic 0x00, Pin 9: vec=de delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=L mask=0 dest_id:0
> (XEN) IRQ 10 Vec112:
> (XEN) Apic 0x00, Pin 10: vec=70 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 11 Vec120:
> (XEN) Apic 0x00, Pin 11: vec=78 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 12 Vec 39:
> (XEN) Apic 0x00, Pin 12: vec=27 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 13 Vec144:
> (XEN) Apic 0x00, Pin 13: vec=90 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=1 dest_id:0
> (XEN) IRQ 14 Vec152:
> (XEN) Apic 0x00, Pin 14: vec=98 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 15 Vec160:
> (XEN) Apic 0x00, Pin 15: vec=a0 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=0 dest_id:0
> (XEN) IRQ 16 Vec 47:
> (XEN) Apic 0x00, Pin 16: vec=2f delivery=LoPri dest=L status=0
> polarity=1 irr=0 trig=L mask=0 dest_id:0
> (XEN) IRQ 17 Vec 63:
> (XEN) Apic 0x00, Pin 17: vec=3f delivery=LoPri dest=L status=0
> polarity=1 irr=0 trig=L mask=0 dest_id:0
> (XEN) IRQ 18 Vec 65:
> (XEN) Apic 0x00, Pin 18: vec=41 delivery=LoPri dest=L status=0
> polarity=1 irr=0 trig=L mask=1 dest_id:0
> (XEN) IRQ 19 Vec200:
> (XEN) Apic 0x00, Pin 19: vec=c8 delivery=LoPri dest=L status=0
> polarity=1 irr=0 trig=L mask=1 dest_id:0
> (XEN) IRQ 20 Vec183:
> (XEN) Apic 0x00, Pin 20: vec=b7 delivery=LoPri dest=L status=0
> polarity=1 irr=0 trig=L mask=0 dest_id:0
> (XEN) IRQ 22 Vec 98:
> (XEN) Apic 0x00, Pin 22: vec=62 delivery=LoPri dest=L status=0
> polarity=1 irr=0 trig=L mask=1 dest_id:0
> (XEN) IRQ 23 Vec168:
> (XEN) Apic 0x00, Pin 23: vec=a8 delivery=LoPri dest=L status=0
> polarity=0 irr=0 trig=E mask=1 dest_id:0
> (XEN) Xen BUG at io_apic.c:554
> (XEN) ----[ Xen-4.1.5-rc1 x86_64 debug=y Tainted: C ]----
> (XEN) CPU: 0
> (XEN) RIP: e008:[<ffff82c48015e2d6>] smp_irq_move_cleanup_interrupt+0x211/0x289
> (XEN) RFLAGS: 0000000000010092 CONTEXT: hypervisor
> (XEN) rax: 0000000000000000 rbx: 00000000000000e9 rcx: 0000000000000000
> (XEN) rdx: 0000000000000016 rsi: 000000000000000a rdi: ffff82c4802592e0
> (XEN) rbp: ffff82c48029fd08 rsp: ffff82c48029fcb8 r8: 0000000000000018
> (XEN) r9: 0000000000000000 r10: 0000000000000000 r11: 0000000000000001
> (XEN) r12: ffff830421080250 r13: ffff830421060534 r14: ffff82c48029ff18
> (XEN) r15: ffff82c4802dd9e0 cr0: 000000008005003b cr4: 00000000000026f0
> (XEN) cr3: 0000000119a96000 cr2: ffff880402070198
> (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e010 cs: e008
> (XEN) Xen stack trace from rsp=ffff82c48029fcb8:
> (XEN) 0000000000000000 ffff82c48029ff18 ffff82c4802dd9e0 000000e900000000
> (XEN) ffff83042109ba04 ffff830421008000 0000000000000114 000000000000001d
> (XEN) 0000000000000114 0000000000000000 00007d3b7fd602c7 ffff82c48014de60
> (XEN) 0000000000000000 0000000000000114 000000000000001d 0000000000000114
> (XEN) ffff82c48029fdc8 ffff830421008000 0000000000000246 ffff82c48025c1f0
> (XEN) 0000000000000003 0000001944602466 0000000000000000 0000000000000001
> (XEN) 0000000000000000 0000000000000286 ffff830421060f34 0000002000000000
> (XEN) ffff82c4801226c0 000000000000e008 0000000000000286 ffff82c48029fdc8
> (XEN) 000000000000e010 0000000000000286 ffff82c48029fe48 ffff82c480164446
> (XEN) ffff82c4802dd9e0 0000000000000286 ffff830421060f00 ffff830421060f34
> (XEN) ffff830421050ac0 000000000000001d 0000000000000246 ffff8301108fd140
> (XEN) ffff82c4801226d3 ffff82c48029fe78 000000000000001d ffff8803fa889af0
> (XEN) 0000000000000114 ffff8804023be000 ffff82c48029fef8 ffff82c48017655b
> (XEN) ffff830114c7f300 ffffffff81381646 ffff82f600000008 ffff830421008000
> (XEN) 0000000000000003 000000030000001d 00000000e2200000 0000000100a0fb00
> (XEN) 0000000000007ff0 ffffffffffffffff 0000000000000003 0000000000000003
> (XEN) 00000000e2200000 c390ed90d1ffffff 0000000000000202 ffff8300ca666000
> (XEN) ffff8803fc880240 0000000000000011 ffff8804023be858 ffff8804023be000
> (XEN) 00007d3b7fd600c7 ffff82c480209f38 ffffffff8100142a 0000000000000021
> (XEN) ffff8804023be000 ffff8804023be858 0000000000000011 ffff8803fc880240
> (XEN) Xen call trace:
> (XEN) [<ffff82c48015e2d6>] smp_irq_move_cleanup_interrupt+0x211/0x289
> (XEN) [<ffff82c48014de60>] irq_move_cleanup_interrupt+0x30/0x40
> (XEN) [<ffff82c4801226c0>] _spin_unlock_irqrestore+0x22/0x24
> (XEN) [<ffff82c480164446>] map_domain_pirq+0x37a/0x3df
> (XEN) [<ffff82c48017655b>] do_physdev_op+0xa2b/0x1508
> (XEN) [<ffff82c480209f38>] syscall_enter+0xc8/0x122
>
>
>> ~Andrew
>>
>
Even more curious. vector e9 does not appear to be programmed in. Can
you extend the debugging to also call __print_IO_APIC().
The i debug key and z debug key list IO-APIC entries from different
sources of information.
~Andrew
next prev parent reply other threads:[~2013-03-26 17:54 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-13 20:50 High CPU temp, suspend problem - xen 4.1.5-pre, linux 3.7.x Marek Marczykowski
2013-03-15 3:00 ` Dario Faggioli
2013-03-15 3:22 ` Marek Marczykowski
2013-03-15 13:02 ` Konrad Rzeszutek Wilk
2013-03-22 15:34 ` Marek Marczykowski
2013-03-22 16:56 ` Konrad Rzeszutek Wilk
2013-03-25 11:36 ` Marek Marczykowski
2013-03-25 14:17 ` Konrad Rzeszutek Wilk
2013-03-25 14:56 ` Marek Marczykowski
2013-03-26 12:17 ` Marek Marczykowski
2013-03-26 13:11 ` Jan Beulich
2013-03-26 13:50 ` Marek Marczykowski
2013-03-26 15:47 ` Andrew Cooper
2013-03-26 16:12 ` Andrew Cooper
2013-03-26 16:47 ` Marek Marczykowski
2013-03-26 16:03 ` Jan Beulich
2013-03-26 16:45 ` Marek Marczykowski
2013-03-26 17:02 ` Andrew Cooper
2013-03-26 17:42 ` Marek Marczykowski
2013-03-26 17:54 ` Andrew Cooper [this message]
2013-03-26 18:21 ` Marek Marczykowski
2013-03-26 18:50 ` Andrew Cooper
2013-03-27 8:50 ` Marek Marczykowski
2013-03-27 8:58 ` Jan Beulich
2013-03-27 8:52 ` Jan Beulich
2013-03-27 9:03 ` Jan Beulich
2013-03-27 14:01 ` Marek Marczykowski
2013-03-27 14:31 ` Marek Marczykowski
2013-03-27 14:46 ` Andrew Cooper
2013-03-27 14:49 ` Marek Marczykowski
2013-03-27 15:51 ` Marek Marczykowski
2013-03-27 16:27 ` Andrew Cooper
2013-03-27 18:16 ` Marek Marczykowski
2013-03-27 18:56 ` Andrew Cooper
2013-03-28 14:43 ` Marek Marczykowski
2013-03-28 10:50 ` Jan Beulich
2013-03-28 11:53 ` Andrew Cooper
2013-03-28 12:54 ` Jan Beulich
2013-03-28 13:19 ` Jan Beulich
2013-03-27 14:52 ` Andrew Cooper
2013-03-27 15:47 ` Konrad Rzeszutek Wilk
2013-03-27 16:56 ` Andrew Cooper
2013-03-27 17:15 ` Marek Marczykowski
2013-03-28 17:41 ` Andrew Cooper
2013-03-28 17:44 ` Marek Marczykowski
2013-03-28 17:50 ` Andrew Cooper
2013-03-29 0:26 ` Marek Marczykowski
2013-03-28 16:13 ` Jan Beulich
2013-03-28 19:03 ` Marek Marczykowski
2013-04-01 13:53 ` Ben Guthro
2013-04-02 1:13 ` Marek Marczykowski
2013-04-02 14:05 ` Konrad Rzeszutek Wilk
2013-04-15 22:09 ` Marek Marczykowski
2013-04-15 23:36 ` Ben Guthro
2013-04-15 23:51 ` konrad wilk
2013-04-16 0:19 ` Ben Guthro
2013-04-16 0:46 ` Ben Guthro
2013-04-16 3:20 ` konrad wilk
2013-04-16 1:02 ` Marek Marczykowski
2013-04-16 8:47 ` Jan Beulich
2013-04-16 11:49 ` Ben Guthro
2013-04-16 11:57 ` Jan Beulich
2013-04-16 12:09 ` Ben Guthro
2013-04-16 12:51 ` Jan Beulich
2013-03-28 16:25 ` Jan Beulich
2013-03-28 16:31 ` Marek Marczykowski
2013-03-28 16:52 ` Jan Beulich
2013-03-28 17:09 ` Marek Marczykowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5151E0D5.3050707@citrix.com \
--to=andrew.cooper3@citrix.com \
--cc=JBeulich@suse.com \
--cc=konrad.wilk@oracle.com \
--cc=marmarek@invisiblethingslab.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.