From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-2?Q?Hajdu_Tam=E1s_M=E1rk?= Date: Tue, 26 Mar 2013 23:14:36 +0000 Subject: [lm-sensors] Gigabyte E240N, it87 module, fan speed control not working, readings may bad Message-Id: <51522BDC.6070103@sirc.hu> MIME-Version: 1 Content-Type: multipart/mixed; boundary="===============6041344564649979576==" List-Id: To: lm-sensors@vger.kernel.org This is a multi-part message in MIME format. --===============6041344564649979576== Content-Type: multipart/alternative; boundary="------------000903030900010106070806" This is a multi-part message in MIME format. --------------000903030900010106070806 Content-Type: text/plain; charset="iso-8859-2"; format="flowed" Content-Transfer-Encoding: quoted-printable Hi, I have a Gigabyte E240N mainboard (integrated amd cpu and gpu), which by=20 pwmconfig reported to use it87 module. This is for first sight works,=20 but one out of 3 temperature reading is always -70 degrees (though it is=20 the temp3, which I don't know what), other two seems to good. Also the=20 fan speed readings seems to be ok (I am not 100% sure). What it really=20 does, that hwmon1 is created and there are changing values so at least=20 it is partially working. I have tried to use pwmconfig to configure and also tried to echo values=20 I could think of, but I could not set (nor pwmconfig could) it's speed. I don't want to flood the list with unrelated data, so please tell me=20 what do you need to address the issue. --=20 =DCdv: *Tam=E1s*. --------------000903030900010106070806 Content-Type: text/html; charset="iso-8859-2" Content-Transfer-Encoding: quoted-printable Hi,

I have a Gigabyte E240N mainboard (integrated amd cpu and gpu), which by pwmconfig reported to use it87 module. This is for first sight works, but one out of 3 temperature reading is always -70 degrees (though it is the temp3, which I don't know what), other two seems to good. Also the fan speed readings seems to be ok (I am not 100% sure). What it really does, that hwmon1 is created and there are changing values so at least it is partially working.
I have tried to use pwmconfig to configure and also tried to echo values I could think of, but I could not set (nor pwmconfig could) it's speed.
I don't want to flood the list with unrelated data, so please tell me what do you need to address the issue.

--
=DCdv: Tam=E1s.

--------------000903030900010106070806-- --===============6041344564649979576== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors --===============6041344564649979576==--