Re: Is this the correct list for AM3517 EVM questions?

[Steven Grunza <grunzasr@comcast.net>]

On 3/27/2013 4:20 PM, Robert P. J. Day wrote:
> On Wed, 27 Mar 2013, Steven Grunza wrote:
>
>> Wow!  You got the SD card?  The kit was supposed to come with a
>> Windows CE and a Linux SD card but I didn't get either.  I was never
>> able to get LogicPD support to send me the image, either.  They just
>> kept pointing the the procedures spread all over the web on how to
>> build the code.
>    just to establish a foundation here, this is the result of booting
> from the SD card that came with the board from logicpd:
>
> =====start=====
> ...
> 218976 Bytes Read from MMC
> Starting OS Bootloader from MMC...
> Starting OS Bootloader...
>
>
> U-Boot 2009.11 (Jan 22 2011 - 01:45:10)
>
> OMAP34xx/35xx-GP ES1.0, CPU-OPP2 L3-165MHz
> AM3517EVM Board + LPDDR/NAND
> I2C:   ready
> DRAM:  256 MB
> NAND:  512 MiB
> *** Warning - bad CRC or NAND, using default environment
>
> In:    serial
> Out:   serial
> Err:   serial
> Die ID #40be00010000000001685a2001015021
> Net:   davinci_emac_initialize
> Ethernet PHY: GENERIC @ 0x00
> DaVinci EMAC
> Hit any key to stop autoboot:  0
> mmc1 is available
> reading boot.scr
>
> ** Unable to read "boot.scr" from mmc 0:1 **
> reading uImage
>
> 2308136 bytes read
> Booting from mmc ...
> ## Booting kernel from Legacy Image at 82000000 ...
>     Image Name:   Arago/2.6.32-psp03.00.01.06.sdk/
>     Image Type:   ARM Linux Kernel Image (uncompressed)
>     Data Size:    2308072 Bytes =  2.2 MB
>     Load Address: 80008000
>     Entry Point:  80008000
>     Verifying Checksum ... OK
>     Loading Kernel Image ... OK
> OK
>
> Starting kernel ...
>
> Uncompressing
> Linux.................................................................................................
> Linux version 2.6.32 (schuyler_2@neo) (gcc version 4.3.3 (Sourcery G++
> Lite 2009q1-203) ) #1 Tue Jan 25 16:18:32 CS1
> CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c53c7f
> CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
> Machine: OMAP3517/AM3517 EVM
> Memory policy: ECC disabled, Data cache writeback
> AM3517 ES3.1 (l2cache iva sgx neon isp )
> SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
> Reserving 4194304 bytes SDRAM for VRAM
> ... snip ...
>
>    and it does boot successfully (well, after i added the touchscreen
> from one of my other kits). but clearly there's a build that works.
> now all i have to do is figure out how to get the same result with
> yocto and the meta-ti layer.
>
> rday
>
Robert,
   Could you dd the SD card into a compressed image and send it to me?  
I might need to setup some sort of scp drop location if it's too big to 
email.  While I want to be able to build the code, I really need to get 
this robot done in time for the April competition...

Steven G.