From: Denis Kenzior <denkenz@gmail.com>
To: ofono@ofono.org
Subject: Re: [PATCH 1/4] SIMCOM plugin driver
Date: Mon, 01 Apr 2013 21:33:56 -0500 [thread overview]
Message-ID: <515A4394.2060508@gmail.com> (raw)
In-Reply-To: <1363948578-24128-1-git-send-email-viallard@syscom-instruments.com>
[-- Attachment #1: Type: text/plain, Size: 14325 bytes --]
Hi Anthony,
On 03/22/2013 05:36 AM, Anthony Viallard wrote:
> Add SIMCOM support.
>
> Implemented using SIM5216E module and ofono 1.12.
>
> - based on SIM5215_SIM5216_ATC_V1.18.pdf documentation ;
> - SMS and GPRS work (in the same time) ;
> - SIM card presence check ;
> - use GSM charset ;
> - use 115200bps, 8 bit data, no parity, 1 bit stop, no data stream control
> for tty configuration ;
> - flight mode support ;
> - No voice part (because I can't test it).
>
> --- ofono-1.12.orig/Makefile.am 2012-04-20 21:06:29.000000000 +0200
> +++ ofono-1.12/Makefile.am 2013-01-21 17:17:48.089627277 +0100
Please send this using git send-email. I cannot apply these patches:
Applying: SIMCOM plugin driver
fatal: sha1 information is lacking or useless (Makefile.am).
Repository lacks necessary blobs to fall back on 3-way merge.
Cannot fall back to three-way merge.
Patch failed at 0001 SIMCOM plugin driver
When you have resolved this problem run "git am --resolved".
If you would prefer to skip this patch, instead run "git am --skip".
To restore the original branch and stop patching run "git am --abort".
> @@ -371,6 +371,9 @@ builtin_sources += plugins/samsung.c
> builtin_modules += sim900
> builtin_sources += plugins/sim900.c
>
> +builtin_modules += simcom
> +builtin_sources += plugins/simcom.c
> +
> if BLUETOOTH
> builtin_modules += bluetooth
> builtin_sources += plugins/bluetooth.c plugins/bluetooth.h
> --- /dev/null 2013-01-28 10:34:59.843091650 +0100
> +++ ofono-1.12/plugins/simcom.c 2013-02-15 16:16:38.058552544 +0100
> @@ -0,0 +1,434 @@
> +/*
> + *
> + * oFono - Open Source Telephony
> + *
> + * Copyright (C) 2008-2011 Intel Corporation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> + *
> + */
> +
> +#ifdef HAVE_CONFIG_H
> +#include<config.h>
> +#endif
> +
> +#include<errno.h>
> +#include<stdlib.h>
> +#include<stdio.h>
> +
> +#include<glib.h>
> +#include<gatchat.h>
> +#include<gattty.h>
> +
> +#define OFONO_API_SUBJECT_TO_CHANGE
> +#include<ofono/plugin.h>
> +#include<ofono/modem.h>
> +#include<ofono/devinfo.h>
> +#include<ofono/netreg.h>
> +#include<ofono/sim.h>
> +#include<ofono/cbs.h>
> +#include<ofono/sms.h>
> +#include<ofono/ussd.h>
> +#include<ofono/gprs.h>
> +#include<ofono/gprs-context.h>
> +#include<ofono/radio-settings.h>
> +#include<ofono/phonebook.h>
> +#include<ofono/log.h>
> +
> +#include<drivers/atmodem/atutil.h>
> +#include<drivers/atmodem/vendor.h>
> +
> +#define MAX_IGNITION_POOL_CALL 7
> +
> +#define CMEERR_SIMBUSY 14
> +
> +static const char *none_prefix[] = { NULL };
> +
> +struct simcom_data {
> + GAtChat *modem;
> + GAtChat *chat;
> + guint ignition_pool;
> + unsigned int ignition_pool_call;
> + unsigned int at_ignition_pending;
> + ofono_bool_t have_sim;
> +};
> +
> +/* Callback and helpers functions */
> +static void simcom_debug(const char *str, void *user_data)
> +{
> + const char *prefix = user_data;
> +
> + ofono_info("%s%s", prefix, str);
> +}
> +
> +static gboolean simcom_ignition(gpointer user_data)
> +{
> + struct ofono_modem *modem = user_data;
> + struct simcom_data *data = ofono_modem_get_data(modem);
> +
> + ++data->ignition_pool_call;
> +
> + if(data->at_ignition_pending> 0)
> + {
> + if(data->ignition_pool_call> MAX_IGNITION_POOL_CALL)
> + {
> + ofono_error("Ignition timeout");
> + return FALSE;
> + }
> +
> + /* Waiting reply of AT commands */
> + DBG("Waiting AT reply...");
> + return TRUE;
> + }
> +
> + ofono_modem_set_powered(modem, TRUE);
> +
> + return FALSE;
> +}
> +
> +static void simcom_sim_status(gboolean ok, GAtResult *result, gpointer user_data)
> +{
> + struct ofono_modem *modem = user_data;
> + struct ofono_error error;
> + struct simcom_data *data = ofono_modem_get_data(modem);
> +
> + --data->at_ignition_pending;
> +
> + if(!ok)
> + {
> + decode_at_error(&error, g_at_result_final_response(result));
> + if(error.type == OFONO_ERROR_TYPE_CME)
> + {
> + if(error.error == CMEERR_SIMBUSY)
> + {
> + DBG("System is busy. Retry...");
> + g_at_chat_send(data->chat, "AT+CPIN?",
> + none_prefix,
> + simcom_sim_status, modem,
> + NULL);
> + ++data->at_ignition_pending;
> + return;
> + }
> + }
> +
> + data->have_sim = FALSE;
> + return;
> + }
> +
> + /* If doesn't have an "fatal" error on AT+CPIN request,
> + * we can guess there a SIM card ...
> + */
> + data->have_sim = TRUE;
> +}
> +
> +static void cfun_enable(gboolean ok, GAtResult *result, gpointer user_data)
> +{
> + struct ofono_modem *modem = user_data;
> + struct simcom_data *data = ofono_modem_get_data(modem);
> +
> + DBG("");
> +
> + if (!ok) {
> + g_at_chat_unref(data->modem);
> + data->modem = NULL;
> +
> + g_at_chat_unref(data->chat);
> + data->chat = NULL;
> +
> + ofono_modem_set_powered(modem, FALSE);
> + return;
> + }
> +
> + /* Get model and sim card status */
> + data->at_ignition_pending = 0;
> +
> + g_at_chat_send(data->chat, "AT+CPIN?", none_prefix,
> + simcom_sim_status, modem, NULL);
> + ++data->at_ignition_pending;
> +
> + data->ignition_pool = g_timeout_add_seconds(1,
> + simcom_ignition,
> + modem);
Are you polling CPIN for signs of life? In that case, there's a
convenience function for this. Grep for at_util_sim_state_query_new, it
takes care of all the magic for you.
> +}
> +
> +static void cfun_disable(gboolean ok, GAtResult *result, gpointer user_data)
> +{
> + struct ofono_modem *modem = user_data;
> + struct simcom_data *data = ofono_modem_get_data(modem);
> +
> + DBG("");
> +
> + g_at_chat_unref(data->chat);
> + data->chat = NULL;
> +
> + if (ok)
> + ofono_modem_set_powered(modem, FALSE);
> +}
> +
> +static void flightmode_cb(gboolean ok, GAtResult *result, gpointer user_data)
> +{
> + struct cb_data *cbd = user_data;
> + ofono_modem_online_cb_t cb = cbd->cb;
> + struct ofono_error error;
> +
> + decode_at_error(&error, g_at_result_final_response(result));
> + cb(&error, cbd->data);
> +}
> +
> +static GAtChat *open_device(struct ofono_modem *modem,
> + const char *key,
> + char *debug)
> +{
> + const char *device;
> + GIOChannel *channel;
> + GAtSyntax *syntax;
> + GAtChat *chat;
> + GHashTable *options;
> +
> + device = ofono_modem_get_string(modem, key);
> + if (device == NULL)
> + {
> + ofono_error("Failed to get modem '%s'", key);
> + return NULL;
> + }
Wrong coding style
> +
> + DBG("%s %s", key, device);
> +
> + options = g_hash_table_new(g_str_hash, g_str_equal);
> + if (options == NULL)
> + return NULL;
> +
> + g_hash_table_insert(options, "Baud", "115200");
> + g_hash_table_insert(options, "Parity", "none");
> + g_hash_table_insert(options, "StopBits", "1");
> + g_hash_table_insert(options, "DataBits", "8");
> + g_hash_table_insert(options, "XonXoff", "off");
> +
> + channel = g_at_tty_open(device, options);
> +
> + /* g_hash_table_destroy(options); */
Why is this commented out?
> +
> + if (channel == NULL)
> + {
> + ofono_error("Failed to get tty for '%s'", key);
> + return NULL;
> + }
Coding style is wrong, please see below.
> +
> + syntax = g_at_syntax_new_gsm_permissive();
> + chat = g_at_chat_new(channel, syntax);
> + g_at_syntax_unref(syntax);
> +
> + g_io_channel_unref(channel);
> +
> + if (chat == NULL)
> + {
> + ofono_error("Failed to get chat for '%s'", key);
> + return NULL;
> + }
Again, coding style is wrong. Please see below.
> +
> + if (getenv("OFONO_AT_DEBUG"))
> + g_at_chat_set_debug(chat, simcom_debug, debug);
> +
> + return chat;
> +}
> +
> +/* Modem interface function */
> +static int simcom_probe(struct ofono_modem *modem)
> +{
> + struct simcom_data *data;
> +
> + DBG("%p", modem);
> +
> + data = g_try_new0(struct simcom_data, 1);
> + if (data == NULL)
> + return -ENOMEM;
> +
> + ofono_modem_set_data(modem, data);
> +
> + return 0;
> +}
> +
> +static void simcom_remove(struct ofono_modem *modem)
> +{
> + struct simcom_data *data = ofono_modem_get_data(modem);
> +
> + DBG("%p", modem);
> +
> + if(data->ignition_pool> 0)
> + {
> + g_source_remove(data->ignition_pool);
> + data->ignition_pool = 0;
> + }
> +
> + ofono_modem_set_data(modem, NULL);
> +
> + /* Cleanup after hot-unplug */
> + g_at_chat_unref(data->chat);
> +
> + g_free(data);
> +}
> +
> +static int simcom_enable(struct ofono_modem *modem)
> +{
> + struct simcom_data *data = ofono_modem_get_data(modem);
> +
> + DBG("%p", modem);
> +
> + data->modem = open_device(modem, "Modem", "Modem: ");
> + if (data->modem == NULL)
> + return -EINVAL;
> +
> + data->chat = open_device(modem, "Data", "Data: ");
> + if (data->chat == NULL) {
> + g_at_chat_unref(data->modem);
> + data->modem = NULL;
> + return -EIO;
> + }
> +
> + g_at_chat_set_slave(data->modem, data->chat);
> +
> + g_at_chat_blacklist_terminator(data->chat,
> + G_AT_CHAT_TERMINATOR_NO_CARRIER);
> +
> + /* Configure AT commands behavior */
> + g_at_chat_send(data->modem, "ATE0 +CMEE=1", NULL, NULL, NULL, NULL);
> + g_at_chat_send(data->chat, "ATE0 +CMEE=1", NULL, NULL, NULL, NULL);
> +
> + /* Ensure that the modem is using GSM character set and not IRA */
> + g_at_chat_send(data->modem, "AT+CSCS=\"GSM\"", none_prefix,
> + NULL, NULL, NULL);
> + g_at_chat_send(data->chat, "AT+CSCS=\"GSM\"", none_prefix,
> + NULL, NULL, NULL);
> +
> + /* Make it up */
> + g_at_chat_send(data->chat, "AT+CFUN=1", none_prefix,
> + cfun_enable, modem, NULL);
> +
> + return -EINPROGRESS;
> +}
> +
> +static int simcom_disable(struct ofono_modem *modem)
> +{
> + struct simcom_data *data = ofono_modem_get_data(modem);
> +
> + DBG("%p", modem);
> +
> + g_at_chat_cancel_all(data->modem);
> + g_at_chat_unregister_all(data->modem);
> +
> + g_at_chat_unref(data->modem);
> + data->modem = NULL;
> +
> + g_at_chat_cancel_all(data->chat);
> + g_at_chat_unregister_all(data->chat);
> +
> + g_at_chat_send(data->chat, "AT+CFUN=4", none_prefix,
> + cfun_disable, modem, NULL);
> +
> + return -EINPROGRESS;
> +}
> +
> +static void simcom_set_online(struct ofono_modem *modem, ofono_bool_t online,
> + ofono_modem_online_cb_t cb, void *user_data)
> +{
> + struct simcom_data *data = ofono_modem_get_data(modem);
> + struct cb_data *cbd = cb_data_new(cb, user_data);
> + char const *command = online ? "AT+CFUN=1" : "AT+CFUN=4";
> +
> + DBG("modem %p %s", modem, online ? "online" : "offline");
> +
> + if (g_at_chat_send(data->chat, command, none_prefix,
> + flightmode_cb, cbd, g_free)> 0)
> + return;
> +
> + CALLBACK_WITH_FAILURE(cb, cbd->data);
> +
> + g_free(cbd);
> +}
> +
> +static void simcom_pre_sim(struct ofono_modem *modem)
> +{
> + struct simcom_data *data = ofono_modem_get_data(modem);
> + struct ofono_sim *sim;
> +
> + DBG("%p", modem);
> +
> + ofono_devinfo_create(modem, 0, "atmodem", data->chat);
> + sim = ofono_sim_create(modem, OFONO_VENDOR_SIMCOM, "atmodem",
> + data->chat);
> +
> + if (sim)
> + ofono_sim_inserted_notify(sim, data->have_sim);
> +}
> +
> +static void simcom_post_sim(struct ofono_modem *modem)
> +{
> + struct simcom_data *data = ofono_modem_get_data(modem);
> + struct ofono_message_waiting *mw;
> + struct ofono_gprs *gprs;
> + struct ofono_gprs_context *gc;
> +
> + DBG("%p", modem);
> +
> + ofono_phonebook_create(modem, 0, "atmodem", data->chat);
> +
> + ofono_sms_create(modem, OFONO_VENDOR_SIMCOM, "atmodem",
> + data->chat);
> +
> + /* gprs things */
This comment is rather useless ;)
> + gprs = ofono_gprs_create(modem, 0, "atmodem", data->chat);
> + gc = ofono_gprs_context_create(modem, 0, "atmodem", data->modem);
> +
> + if(gprs&& gc)
> + {
> + ofono_gprs_add_context(gprs, gc);
> + }
This is not according to the coding style. Please refer to
doc/coding-style.txt for details. In particular, there should not be
any parentheses around the if. And we use the Linux kernel style, so it
would look like:
if (gprs && gc) {
foo;
bar;
}
> +}
> +
> +static void simcom_post_online(struct ofono_modem *modem)
> +{
> + struct simcom_data *data = ofono_modem_get_data(modem);
> +
> + DBG("%p", modem);
> +
> + ofono_netreg_create(modem, OFONO_VENDOR_SIMCOM, "atmodem", data->chat);
> + ofono_cbs_create(modem, 0, "atmodem", data->chat);
> + ofono_ussd_create(modem, 0, "atmodem", data->chat);
> +}
> +
> +static struct ofono_modem_driver simcom_driver = {
> + .name = "simcom",
> + .probe = simcom_probe,
> + .remove = simcom_remove,
> + .enable = simcom_enable,
> + .disable = simcom_disable,
> + .set_online = simcom_set_online,
> + .pre_sim = simcom_pre_sim,
> + .post_sim = simcom_post_sim,
> + .post_online = simcom_post_online,
> +};
> +
> +static int simcom_init(void)
> +{
> + return ofono_modem_driver_register(&simcom_driver);
> +}
> +
> +static void simcom_exit(void)
> +{
> + ofono_modem_driver_unregister(&simcom_driver);
> +}
> +
> +OFONO_PLUGIN_DEFINE(simcom, "SIMCOM modem driver", VERSION,
> + OFONO_PLUGIN_PRIORITY_DEFAULT,
> + simcom_init, simcom_exit)
There is whitespace corruption here, do not use spaces for indentation.
> _______________________________________________
> ofono mailing list
> ofono(a)ofono.org
> http://lists.ofono.org/listinfo/ofono
Regards,
-Denis
prev parent reply other threads:[~2013-04-02 2:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-22 10:36 [PATCH 1/4] SIMCOM plugin driver Anthony Viallard
2013-03-22 10:36 ` [PATCH 2/4] SIMCOM AT+CNMI quirk Anthony Viallard
2013-04-02 2:35 ` Denis Kenzior
2013-03-22 10:36 ` [PATCH 3/4] SIMCOM SIM card ready quirk Anthony Viallard
2013-04-02 2:39 ` Denis Kenzior
2013-03-22 10:36 ` [PATCH 4/4] SIMCOM signal strength reporting quirk Anthony Viallard
2013-04-02 2:40 ` Denis Kenzior
2013-04-02 2:33 ` Denis Kenzior [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=515A4394.2060508@gmail.com \
--to=denkenz@gmail.com \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.