From: Viallard Anthony <viallard@syscom-instruments.com>
To: ofono@ofono.org
Subject: Re: Randomly SMS sent passes or fails
Date: Tue, 02 Apr 2013 17:25:42 +0200 [thread overview]
Message-ID: <515AF876.8010500@syscom-instruments.com> (raw)
In-Reply-To: <515AF457.2000102@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2289 bytes --]
Hi,
On 02. 04. 13 17:08, Denis Kenzior wrote:
>
> I doubt provisioning has anything to do with this. That is only for
> activating a context.
Indeed, I tried to remove duplicate entries, provisioning is good but
SMS fail with GPRS enabled.
I see stange behavior too. When I try to re-enabled a disabled GPRS
context (Active true --> Active false --> Active true), I've got an error:
----------------------------
ofonod[25358]: Modem: > AT+CGDATA="PPP",1\r
ofonod[25358]: Modem: < \r\nCONNECT 115200\r\n
ofonod[25358]: drivers/atmodem/gprs-context.c:at_cgdata_cb() ok 1
ofonod[25358]: drivers/atmodem/gprs-context.c:setup_ppp()
ofonod[25358]: drivers/atmodem/gprs-context.c:ppp_connect()
ofonod[25358]: IP: 10.47.176.26
ofonod[25358]: DNS: 10.74.210.210, 10.74.210.211
ofonod[25358]: src/gprs.c:pri_activate_callback() 0x101a58
ofonod[25358]: plugins/udev.c:udev_event() subsystem net add
ofonod[25358]: plugins/udev.c:udev_event() subsystem net finished
ofonod[25358]: plugins/udevng.c:check_modem_list()
ofonod[25358]:
drivers/atmodem/gprs-context.c:at_gprs_deactivate_primary() cid 1
ofonod[25358]: plugins/udevng.c:remove_device()
/sys/devices/virtual/net/ppp0
ofonod[25358]: plugins/udev.c:udev_event() subsystem net remove
ofonod[25358]: plugins/udev.c:remove_modem() /devices/virtual/net/ppp0
ofonod[25358]: plugins/udev.c:udev_event() subsystem net finished
ofonod[25358]: drivers/atmodem/gprs-context.c:ppp_disconnect() Reason: 6
ofonod[25358]: Modem: < \r\nNO CARRIER\r\n
ofonod[25358]: Data: < \r\nNO CARRIER\r\n
ofonod[25358]: drivers/atmodem/gprs-context.c:at_gprs_activate_primary()
cid 1
ofonod[25358]: src/gprs.c:pri_activate_callback() 0x101a58
ofonod[25358]: src/gprs.c:pri_activate_callback() Activating context
failed with error: Unknown error type
----------------------------
But it works well on the first activation... I need to investiguate this
issue to see what happenning in the source code.
>
> This is automatic provisioning. If there are multiple possibilities that
> fit, then this requires user input. Obviously oFono does not support
> user input, so a UI of some sort to finish provisioning is required.
>
Yes of course ! Sorry, I've chocolate instead of brain since few days.
Regards,
prev parent reply other threads:[~2013-04-02 15:25 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-05 15:27 Randomly SMS sent passes or fails Viallard Anthony
2013-03-05 20:43 ` Denis Kenzior
2013-03-06 9:23 ` Viallard Anthony
2013-03-11 14:53 ` Viallard Anthony
2013-03-12 18:13 ` Denis Kenzior
2013-03-13 16:11 ` Viallard Anthony
2013-03-28 9:02 ` Viallard Anthony
2013-03-28 14:24 ` Denis Kenzior
2013-04-12 13:08 ` Viallard Anthony
2013-05-02 16:40 ` Viallard Anthony
2013-05-02 18:36 ` Denis Kenzior
2013-05-21 14:20 ` Viallard Anthony
2013-03-28 14:29 ` Viallard Anthony
2013-03-28 14:42 ` Denis Kenzior
2013-03-28 16:29 ` Viallard Anthony
2013-03-28 18:05 ` Denis Kenzior
2013-04-02 13:49 ` Viallard Anthony
2013-04-02 15:08 ` Denis Kenzior
2013-04-02 15:25 ` Viallard Anthony [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=515AF876.8010500@syscom-instruments.com \
--to=viallard@syscom-instruments.com \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.