diff for duplicates of <515C5C76.3080009@wwwdotorg.org> diff --git a/a/1.txt b/N1/1.txt index f02e3d2..1b07c5f 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -5,7 +5,7 @@ On 04/03/2013 03:16 AM, Prabhakar Lad wrote: > > Following is the pin control snippet of da850.dtsi:- > -> pmx_core: pinmux at 1c14120 { +> pmx_core: pinmux@1c14120 { ... > i2c0_pins: pinmux_i2c0_pins { > pinctrl-single,bits = < @@ -23,13 +23,13 @@ On 04/03/2013 03:16 AM, Prabhakar Lad wrote: > > And following is the code snippet for dts:- > -> i2c0: i2c at 1c22000 { +> i2c0: i2c@1c22000 { > status = "okay"; > clock-frequency = <100000>; > pinctrl-names = "default"; > pinctrl-0 = <&i2c0_pins>; > }; -> mdio: mdio at 1e24000 { +> mdio: mdio@1e24000 { > status = "okay"; > bus_freq = <2200000>; > pinctrl-names = "default"; diff --git a/a/content_digest b/N1/content_digest index ea34315..71c523e 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,8 +1,12 @@ "ref\0CA+V-a8uiPwsAD--OHFAE=i2ed+-wbXm4p2deZXr92+Zv6GDS1w@mail.gmail.com\0" - "From\0swarren@wwwdotorg.org (Stephen Warren)\0" - "Subject\0Query on pinctrl usage for DT nodes\0" + "ref\0CA+V-a8uiPwsAD--OHFAE=i2ed+-wbXm4p2deZXr92+Zv6GDS1w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org\0" + "From\0Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>\0" + "Subject\0Re: Query on pinctrl usage for DT nodes\0" "Date\0Wed, 03 Apr 2013 10:44:38 -0600\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Prabhakar Lad <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "Cc\0Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>" + device-tree <devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org> + " LAK <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>\0" "\00:1\0" "b\0" "On 04/03/2013 03:16 AM, Prabhakar Lad wrote:\n" @@ -12,7 +16,7 @@ "> \n" "> Following is the pin control snippet of da850.dtsi:-\n" "> \n" - "> \t\tpmx_core: pinmux at 1c14120 {\n" + "> \t\tpmx_core: pinmux@1c14120 {\n" "...\n" "> i2c0_pins: pinmux_i2c0_pins {\n" "> pinctrl-single,bits = <\n" @@ -30,13 +34,13 @@ "> \n" "> And following is the code snippet for dts:-\n" "> \n" - "> \t\ti2c0: i2c at 1c22000 {\n" + "> \t\ti2c0: i2c@1c22000 {\n" "> \t\t\tstatus = \"okay\";\n" "> \t\t\tclock-frequency = <100000>;\n" "> \t\t\tpinctrl-names = \"default\";\n" "> \t\t\tpinctrl-0 = <&i2c0_pins>;\n" "> \t\t};\n" - "> \t\tmdio: mdio at 1e24000 {\n" + "> \t\tmdio: mdio@1e24000 {\n" "> \t\t\tstatus = \"okay\";\n" "> \t\t\tbus_freq = <2200000>;\n" "> \t\t\tpinctrl-names = \"default\";\n" @@ -72,4 +76,4 @@ "> alternative way to handle if the two node's are using same pins any\n" > pointers could be very much helpful ? -91f646f04a3bfd0c5b280941a3b39078d1192b0dbe663e383f6ba4c1727bf542 +b40c5f16352a29a974690ad3b0e5854e236a0cb976a4a511e009a5c06e381d4f
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.