From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from 7of9.schinagl.nl ([88.159.158.68]:54574 "EHLO 7of9.schinagl.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934055Ab3DHHN3 (ORCPT ); Mon, 8 Apr 2013 03:13:29 -0400 Message-ID: <516193FF.50709@schinagl.nl> Date: Sun, 07 Apr 2013 17:42:55 +0200 From: Oliver Schinagl MIME-Version: 1.0 To: Jan Saris CC: linux-media@vger.kernel.org Subject: Re: No Signal with TerraTec Cinergy T PCIe dual References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On 07-04-13 12:56, Jan Saris wrote: > Hi, > > Sinse a couple of months I'm trying to get my second DVB-C card to > work, but with no luck. > I have searched a lot around and even tried the last media_build. I have the same card and while I don't see anything wrong (you have 2 dvb-t devices installed right? adapter0 is something else, and the Cinergy is adapter1 and adapter2? Ah, yes you do say 'other dvb-c' sorry. > I am running linux 3.5.0-26-generic with the latests media_build from > here (http://git.linuxtv.org/media_build.git) > > For some reason the card won't get a lock. Here are my test results: Remember to set the frontend properly; dvb-fe-tool from memory (tab completion ftw). And remember the cinergy is dual dvb-t; but only single dvb-c (and single analog, but i think that is still not implemented?) > > Terratec Cinergy PCIe Dual > dvbv5-scan -a2 -v channel2.conf > using demux '/dev/dvb/adapter2/demux0' > Device DRXK DVB-C DVB-T (/dev/dvb/adapter2/frontend0) capabilities: > CAN_FEC_1_2 CAN_FEC_2_3 CAN_FEC_3_4 CAN_FEC_5_6 CAN_FEC_7_8 > CAN_FEC_AUTO CAN_GUARD_INTERVAL_AUTO CAN_HIERARCHY_AUTO > CAN_INVERSION_AUTO CAN_MUTE_TS CAN_QAM_16 CAN_QAM_32 CAN_QAM_64 > CAN_QAM_128 CAN_QAM_256 CAN_RECOVER CAN_TRANSMISSION_MODE_AUTO > DVB API Version 5.6, Current v5 delivery system: DVBC/ANNEX_A > Supported delivery systems: [DVBC/ANNEX_A] DVBC/ANNEX_C DVBT > Scanning frequency #1 304000000 > FREQUENCY = 304000000 > MODULATION = QAM/64 > INVERSION = AUTO > SYMBOL_RATE = 6875000 > INNER_FEC = AUTO > DELIVERY_SYSTEM = DVBC/ANNEX_A > status 00 | signal 0% | snr 0% | ber 0 | unc 119 | tune failed > dmesg > [ 5.332360] cx23885_dvb_register() allocating 1 frontend(s) > [ 5.332365] cx23885[0]: cx23885 based dvb card > [ 5.365162] drxk: status = 0x639160d9 > [ 5.365167] drxk: detected a drx-3916k, spin A3, xtal 20.250 MHz > [ 5.465869] DRXK driver version 0.9.4300 > [ 5.504139] drxk: frontend initialized. > [ 5.517782] mt2063_attach: Attaching MT2063 > [ 5.517788] DVB: registering new adapter (cx23885[0]) > [ 5.517791] DVB: registering adapter 1 frontend 0 (DRXK DVB-T)... > [ 5.518664] cx23885_dvb_register() allocating 1 frontend(s) > [ 5.518668] cx23885[0]: cx23885 based dvb card > [ 5.533886] drxk: status = 0x639130d9 > [ 5.533896] drxk: detected a drx-3913k, spin A3, xtal 20.250 MHz > [ 5.617338] DRXK driver version 0.9.4300 > [ 5.650861] drxk: frontend initialized. > [ 5.650872] mt2063_attach: Attaching MT2063 > [ 5.650876] DVB: registering new adapter (cx23885[0]) > [ 5.650878] DVB: registering adapter 2 frontend 0 (DRXK DVB-C DVB-T)... > [ 5.651338] cx23885_dev_checkrevision() Hardware revision = 0xa5 > [ 5.651343] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, > latency: 0, mmio: 0xff400000 > ........ > [ 153.727978] mt2063: detected a mt2063 B3 > [ 153.877050] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: > [ 153.877058] drxk: 02 00 00 00 10 00 05 00 03 02 .......... > [ 156.989702] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: > [ 156.989710] drxk: 02 00 00 00 10 00 05 00 03 02 .......... > [ 170.558420] mt2063: detected a mt2063 B3 > [ 170.629422] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: > [ 170.629430] drxk: 02 00 00 00 10 00 05 00 03 02 .......... > [ 173.742057] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: > [ 173.742065] drxk: 02 00 00 00 10 00 05 00 03 02 .......... > [ 251.314900] mt2063: detected a mt2063 B3 > [ 251.385932] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: > [ 251.385940] drxk: 02 00 00 00 10 00 05 00 03 02 .......... > [ 254.498522] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: > [ 254.498530] drxk: 02 00 00 00 10 00 05 00 03 02 .......... > > lspci -vvv > 02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 > PCI Video and Audio Decoder (rev 04) > Subsystem: TERRATEC Electronic GmbH Cinergy T PCIe Dual > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at ff400000 (64-bit, non-prefetchable) [size=2M] > Capabilities: [40] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <64ns, L1 <1us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > AuxPwr- TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 <2us, L1 <4us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- > SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] Vital Product Data > Product Name: " > End > Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- > UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [200 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed+ WRR32+ WRR64+ WRR128- > Ctrl: ArbSelect=WRR64 > Status: InProgress- > Port Arbitration Table [240] > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > Kernel driver in use: cx23885 > Kernel modules: cx23885 > > It says no signal, but if I put the antenna-cable in my other DVB-C > card and do a scan I get: > Philips TV-Card > dvbv5-scan -a0 -v channel2.conf > using demux '/dev/dvb/adapter0/demux0' > Device Philips TDA10023 DVB-C (/dev/dvb/adapter0/frontend0) capabilities: > CAN_FEC_AUTO CAN_INVERSION_AUTO CAN_QAM_16 CAN_QAM_32 > CAN_QAM_64 CAN_QAM_128 CAN_QAM_256 CAN_QPSK > DVB API Version 5.6, Current v5 delivery system: DVBC/ANNEX_A > Supported delivery systems: [DVBC/ANNEX_A] DVBC/ANNEX_C > Scanning frequency #1 304000000 > FREQUENCY = 304000000 > MODULATION = QAM/64 > INVERSION = AUTO > SYMBOL_RATE = 6875000 > INNER_FEC = AUTO > DELIVERY_SYSTEM = DVBC/ANNEX_A > status 1f | signal 97% | snr 94% | ber 1728 | unc 62194 | FE_HAS_LOCK > > Service #0 (101) Nederland 1 channel 0.1.0 > Service #1 (102) Nederland 2 channel 0.2.1 > Service #2 (103) Nederland 3 channel 0.3.2 > Service #3 (8101) 100%NL channel 0.801.3 > Service #4 (8102) Arrow Classic Rock channel 0.802.4 > Service #5 (8103) Arrow Jazz channel 0.803.5 > Service #6 (8104) BBC radio 1 channel 0.804.6 > Service #7 (8105) BBC radio 2 channel 0.805.7 > Service #8 (8106) BBC radio 3 channel 0.806.8 > Service #9 (8107) BBC radio 4 channel 0.807.9 > Service #10 (8108) BNR channel 0.808.10 > Service #11 (8109) Classic FM channel 0.809.11 > New transponder/channel found: #2: 505937920 > New transponder/channel found: #3: 515112960 > New transponder/channel found: #4: 524288000 > New transponder/channel found: #5: 529530880 > New transponder/channel found: #6: 538705920 > New transponder/channel found: #7: 547880960 > New transponder/channel found: #8: 557056000 > New transponder/channel found: #9: 566231040 > New transponder/channel found: #10: 312000000 > New transponder/channel found: #11: 320000000 > New transponder/channel found: #12: 328000000 > New transponder/channel found: #13: 336000000 > New transponder/channel found: #14: 580648960 > New transponder/channel found: #15: 344000000 > New transponder/channel found: #16: 352000000 > New transponder/channel found: #17: 360000000 > New transponder/channel found: #18: 368000000 > > Does anyone know what I'm doing wrong? > Thanks, > > Jan Saris > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html