From: Hector Palacios <hector.palacios@digi.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: "linux-watchdog@vger.kernel.org" <linux-watchdog@vger.kernel.org>,
"wim@iguana.be" <wim@iguana.be>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH RFC] watchdog: core: don't try to stop device if not running
Date: Mon, 8 Apr 2013 09:48:57 +0200 [thread overview]
Message-ID: <51627669.1070900@digi.com> (raw)
In-Reply-To: <20130405183450.GA29835@roeck-us.net>
On 04/05/2013 08:34 PM, Guenter Roeck wrote:
> On Fri, Apr 05, 2013 at 06:09:44PM +0200, Hector Palacios wrote:
>> A watchdog device may be stopped from userspace using WDIOC_SETOPTIONS
>> ioctl and flag WDIOS_DISABLECARD. If the device is closed after this
>> operation, watchdog_release() is called and status bits checked for
>> stopping it. Besides, if the device has not been unregistered a critical
>> message "watchdog did not stop!" is printed, although the ioctl may have
>> successfully stopped it already.
>>
>> Without the patch a user application sample code like this will successfully
>> stop the watchdog, but the kernel will output the message
>> "watchdog did not stop!":
>>
>> wd_fd = open("/dev/watchdog", O_RDWR);
>>
>> flags = WDIOS_DISABLECARD;
>> ioctl(wd_fd, WDIOC_SETOPTIONS, &flags);
>>
>> close(wd_fd);
>>
>> Signed-off-by: Hector Palacios <hector.palacios@digi.com>
>
> How about the following patch instead ?
>
> diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
> index 08b48bb..9775e8d 100644
> --- a/drivers/watchdog/watchdog_dev.c
> +++ b/drivers/watchdog/watchdog_dev.c
> @@ -469,7 +469,9 @@ static int watchdog_release(struct inode *inode, struct file *file)
> * or if WDIOF_MAGICCLOSE is not set. If nowayout was set then
> * watchdog_stop will fail.
> */
> - if (test_and_clear_bit(WDOG_ALLOW_RELEASE, &wdd->status) ||
> + if (!test_bit(WDOG_ACTIVE, &wdd->status))
> + err = 0;
> + else if (test_and_clear_bit(WDOG_ALLOW_RELEASE, &wdd->status) ||
> !(wdd->info->options & WDIOF_MAGICCLOSE))
> err = watchdog_stop(wdd);
>
> Much less invasive and the result is the same.
I like the simplicity but it is kind of inverted logic to initially define err =
-EBUSY only to turn it to zero later, so I'm rebuilding your approach like this:
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index ef8edec..a4163cd 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -463,16 +463,19 @@ out:
static int watchdog_release(struct inode *inode, struct file *file)
{
struct watchdog_device *wdd = file->private_data;
- int err = -EBUSY;
+ int err = 0;
/*
* We only stop the watchdog if we received the magic character
* or if WDIOF_MAGICCLOSE is not set. If nowayout was set then
* watchdog_stop will fail.
*/
- if (test_and_clear_bit(WDOG_ALLOW_RELEASE, &wdd->status) ||
- !(wdd->info->options & WDIOF_MAGICCLOSE))
+ if (test_bit(WDOG_ACTIVE, &wdd->status))
+ err = -EBUSY;
+ else if (test_and_clear_bit(WDOG_ALLOW_RELEASE, &wdd->status) ||
+ !(wdd->info->options & WDIOF_MAGICCLOSE)) {
err = watchdog_stop(wdd);
+ }
/* If the watchdog was not stopped, send a keepalive ping */
which makes the code more readable.
Thanks,
--
Héctor Palacios
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Hector Palacios <hector.palacios@digi.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: "linux-watchdog@vger.kernel.org" <linux-watchdog@vger.kernel.org>,
"wim@iguana.be" <wim@iguana.be>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH RFC] watchdog: core: don't try to stop device if not running
Date: Mon, 8 Apr 2013 09:48:57 +0200 [thread overview]
Message-ID: <51627669.1070900@digi.com> (raw)
In-Reply-To: <20130405183450.GA29835@roeck-us.net>
On 04/05/2013 08:34 PM, Guenter Roeck wrote:
> On Fri, Apr 05, 2013 at 06:09:44PM +0200, Hector Palacios wrote:
>> A watchdog device may be stopped from userspace using WDIOC_SETOPTIONS
>> ioctl and flag WDIOS_DISABLECARD. If the device is closed after this
>> operation, watchdog_release() is called and status bits checked for
>> stopping it. Besides, if the device has not been unregistered a critical
>> message "watchdog did not stop!" is printed, although the ioctl may have
>> successfully stopped it already.
>>
>> Without the patch a user application sample code like this will successfully
>> stop the watchdog, but the kernel will output the message
>> "watchdog did not stop!":
>>
>> wd_fd = open("/dev/watchdog", O_RDWR);
>>
>> flags = WDIOS_DISABLECARD;
>> ioctl(wd_fd, WDIOC_SETOPTIONS, &flags);
>>
>> close(wd_fd);
>>
>> Signed-off-by: Hector Palacios <hector.palacios@digi.com>
>
> How about the following patch instead ?
>
> diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
> index 08b48bb..9775e8d 100644
> --- a/drivers/watchdog/watchdog_dev.c
> +++ b/drivers/watchdog/watchdog_dev.c
> @@ -469,7 +469,9 @@ static int watchdog_release(struct inode *inode, struct file *file)
> * or if WDIOF_MAGICCLOSE is not set. If nowayout was set then
> * watchdog_stop will fail.
> */
> - if (test_and_clear_bit(WDOG_ALLOW_RELEASE, &wdd->status) ||
> + if (!test_bit(WDOG_ACTIVE, &wdd->status))
> + err = 0;
> + else if (test_and_clear_bit(WDOG_ALLOW_RELEASE, &wdd->status) ||
> !(wdd->info->options & WDIOF_MAGICCLOSE))
> err = watchdog_stop(wdd);
>
> Much less invasive and the result is the same.
I like the simplicity but it is kind of inverted logic to initially define err =
-EBUSY only to turn it to zero later, so I'm rebuilding your approach like this:
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index ef8edec..a4163cd 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -463,16 +463,19 @@ out:
static int watchdog_release(struct inode *inode, struct file *file)
{
struct watchdog_device *wdd = file->private_data;
- int err = -EBUSY;
+ int err = 0;
/*
* We only stop the watchdog if we received the magic character
* or if WDIOF_MAGICCLOSE is not set. If nowayout was set then
* watchdog_stop will fail.
*/
- if (test_and_clear_bit(WDOG_ALLOW_RELEASE, &wdd->status) ||
- !(wdd->info->options & WDIOF_MAGICCLOSE))
+ if (test_bit(WDOG_ACTIVE, &wdd->status))
+ err = -EBUSY;
+ else if (test_and_clear_bit(WDOG_ALLOW_RELEASE, &wdd->status) ||
+ !(wdd->info->options & WDIOF_MAGICCLOSE)) {
err = watchdog_stop(wdd);
+ }
/* If the watchdog was not stopped, send a keepalive ping */
which makes the code more readable.
Thanks,
--
Héctor Palacios
next prev parent reply other threads:[~2013-04-08 7:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-05 16:09 [PATCH RFC] watchdog: core: don't try to stop device if not running Hector Palacios
2013-04-05 18:34 ` Guenter Roeck
2013-04-08 7:48 ` Hector Palacios [this message]
2013-04-08 7:48 ` Hector Palacios
2013-04-08 8:16 ` Guenter Roeck
2013-04-08 8:43 ` Hector Palacios
2013-04-08 8:43 ` Hector Palacios
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51627669.1070900@digi.com \
--to=hector.palacios@digi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.