From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from 7of9.schinagl.nl ([88.159.158.68]:45260 "EHLO 7of9.schinagl.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S937609Ab3DIK0l (ORCPT ); Tue, 9 Apr 2013 06:26:41 -0400 Message-ID: <51630545.7060403@schinagl.nl> Date: Mon, 08 Apr 2013 19:58:29 +0200 From: Oliver Schinagl MIME-Version: 1.0 To: Jan Saris CC: linux-media@vger.kernel.org Subject: Re: No Signal with TerraTec Cinergy T PCIe dual References: <516193FF.50709@schinagl.nl> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On 09-04-13 10:47, Jan Saris wrote: > Hi, > > Thanks for your reply, > Do you only use DVB-T, or also DVB-C? Because it looks to me that > DVB-C isn't implemented, or at least giving me a lot of errors? > > I use the correct front-end of adapter2 (as you can see in the log: > DELIVERY_SYSTEM = DVBC/ANNEX_A) > adapter1 is only DVB-T I watch via DVB-T so I always have to set that to my second tuner (to have dual tuner possibility). dvb-fe-tool -a 0 -d DVB-T dvb-fe-tool -a 1 -d DVB-T for adapter 0 and 1. In your case however, you do not use DVB-T. The first tuner thus is useless (It can only function as Analog tuner, but I have no idea what the status for that is atm), I can't 'choose' it as delivery system. As for adapter 1, You can swap between DVBT, DVBC/ANNEX_A and DVBC/ANNEX_C. So that's DVBT and DVBC, but two flavors. I don't know what it means, but you can try switching between those two? dvb-fe-tool -a 1 -d DVBC/ANNEX_C Give it a shot :) > > What do you meen by: "Remember to set the frontend properly; > dvb-fe-tool from memory"?? > To set the delevery system to DVB-C before running the dvbv5-scan?? > > Jan > > 2013/4/7 Oliver Schinagl : >> On 07-04-13 12:56, Jan Saris wrote: >>> Hi, >>> >>> Sinse a couple of months I'm trying to get my second DVB-C card to >>> work, but with no luck. >>> I have searched a lot around and even tried the last media_build. >> I have the same card and while I don't see anything wrong (you have 2 dvb-t >> devices installed right? adapter0 is something else, and the Cinergy is >> adapter1 and adapter2? Ah, yes you do say 'other dvb-c' sorry. >> >>> I am running linux 3.5.0-26-generic with the latests media_build from >>> here (http://git.linuxtv.org/media_build.git) >>> >>> For some reason the card won't get a lock. Here are my test results: >> Remember to set the frontend properly; dvb-fe-tool from memory (tab >> completion ftw). And remember the cinergy is dual dvb-t; but only single >> dvb-c (and single analog, but i think that is still not implemented?) >>> >>> Terratec Cinergy PCIe Dual >>> dvbv5-scan -a2 -v channel2.conf >>> using demux '/dev/dvb/adapter2/demux0' >>> Device DRXK DVB-C DVB-T (/dev/dvb/adapter2/frontend0) capabilities: >>> CAN_FEC_1_2 CAN_FEC_2_3 CAN_FEC_3_4 CAN_FEC_5_6 CAN_FEC_7_8 >>> CAN_FEC_AUTO CAN_GUARD_INTERVAL_AUTO CAN_HIERARCHY_AUTO >>> CAN_INVERSION_AUTO CAN_MUTE_TS CAN_QAM_16 CAN_QAM_32 CAN_QAM_64 >>> CAN_QAM_128 CAN_QAM_256 CAN_RECOVER CAN_TRANSMISSION_MODE_AUTO >>> DVB API Version 5.6, Current v5 delivery system: DVBC/ANNEX_A >>> Supported delivery systems: [DVBC/ANNEX_A] DVBC/ANNEX_C DVBT >>> Scanning frequency #1 304000000 >>> FREQUENCY = 304000000 >>> MODULATION = QAM/64 >>> INVERSION = AUTO >>> SYMBOL_RATE = 6875000 >>> INNER_FEC = AUTO >>> DELIVERY_SYSTEM = DVBC/ANNEX_A >>> status 00 | signal 0% | snr 0% | ber 0 | unc 119 | tune failed >>> dmesg >>> [ 5.332360] cx23885_dvb_register() allocating 1 frontend(s) >>> [ 5.332365] cx23885[0]: cx23885 based dvb card >>> [ 5.365162] drxk: status = 0x639160d9 >>> [ 5.365167] drxk: detected a drx-3916k, spin A3, xtal 20.250 MHz >>> [ 5.465869] DRXK driver version 0.9.4300 >>> [ 5.504139] drxk: frontend initialized. >>> [ 5.517782] mt2063_attach: Attaching MT2063 >>> [ 5.517788] DVB: registering new adapter (cx23885[0]) >>> [ 5.517791] DVB: registering adapter 1 frontend 0 (DRXK DVB-T)... >>> [ 5.518664] cx23885_dvb_register() allocating 1 frontend(s) >>> [ 5.518668] cx23885[0]: cx23885 based dvb card >>> [ 5.533886] drxk: status = 0x639130d9 >>> [ 5.533896] drxk: detected a drx-3913k, spin A3, xtal 20.250 MHz >>> [ 5.617338] DRXK driver version 0.9.4300 >>> [ 5.650861] drxk: frontend initialized. >>> [ 5.650872] mt2063_attach: Attaching MT2063 >>> [ 5.650876] DVB: registering new adapter (cx23885[0]) >>> [ 5.650878] DVB: registering adapter 2 frontend 0 (DRXK DVB-C DVB-T)... >>> [ 5.651338] cx23885_dev_checkrevision() Hardware revision = 0xa5 >>> [ 5.651343] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, >>> latency: 0, mmio: 0xff400000 >>> ........ >>> [ 153.727978] mt2063: detected a mt2063 B3 >>> [ 153.877050] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with >>> params: >>> [ 153.877058] drxk: 02 00 00 00 10 00 05 00 03 02 >>> .......... >>> [ 156.989702] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with >>> params: >>> [ 156.989710] drxk: 02 00 00 00 10 00 05 00 03 02 >>> .......... >>> [ 170.558420] mt2063: detected a mt2063 B3 >>> [ 170.629422] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with >>> params: >>> [ 170.629430] drxk: 02 00 00 00 10 00 05 00 03 02 >>> .......... >>> [ 173.742057] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with >>> params: >>> [ 173.742065] drxk: 02 00 00 00 10 00 05 00 03 02 >>> .......... >>> [ 251.314900] mt2063: detected a mt2063 B3 >>> [ 251.385932] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with >>> params: >>> [ 251.385940] drxk: 02 00 00 00 10 00 05 00 03 02 >>> .......... >>> [ 254.498522] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with >>> params: >>> [ 254.498530] drxk: 02 00 00 00 10 00 05 00 03 02 >>> .......... >>> >>> lspci -vvv >>> 02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 >>> PCI Video and Audio Decoder (rev 04) >>> Subsystem: TERRATEC Electronic GmbH Cinergy T PCIe Dual >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>> ParErr- Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> SERR- >> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 16 >>> Region 0: Memory at ff400000 (64-bit, non-prefetchable) [size=2M] >>> Capabilities: [40] Express (v1) Endpoint, MSI 00 >>> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s >>> <64ns, L1 <1us >>> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- >>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>> Unsupported- >>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- >>> AuxPwr- TransPend- >>> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, >>> Latency L0 <2us, L1 <4us >>> ClockPM- Surprise- LLActRep- BwNot- >>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>> CommClk+ >>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- >>> SlotClk+ DLActive- BWMgmt- ABWMgmt- >>> Capabilities: [80] Power Management version 2 >>> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA >>> PME(D0+,D1+,D2+,D3hot+,D3cold-) >>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- >>> Capabilities: [90] Vital Product Data >>> Product Name: " >>> End >>> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ >>> Address: 0000000000000000 Data: 0000 >>> Capabilities: [100 v1] Advanced Error Reporting >>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- >>> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- >>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- >>> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- >>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- >>> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- >>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- >>> NonFatalErr- >>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- >>> NonFatalErr- >>> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- >>> ChkEn- >>> Capabilities: [200 v1] Virtual Channel >>> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 >>> Arb: Fixed+ WRR32+ WRR64+ WRR128- >>> Ctrl: ArbSelect=WRR64 >>> Status: InProgress- >>> Port Arbitration Table [240] >>> VC0: Caps: PATOffset=00 MaxTimeSlots=1 >>> RejSnoopTrans- >>> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- >>> WRR256- >>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 >>> Status: NegoPending- InProgress- >>> Kernel driver in use: cx23885 >>> Kernel modules: cx23885 >>> >>> It says no signal, but if I put the antenna-cable in my other DVB-C >>> card and do a scan I get: >>> Philips TV-Card >>> dvbv5-scan -a0 -v channel2.conf >>> using demux '/dev/dvb/adapter0/demux0' >>> Device Philips TDA10023 DVB-C (/dev/dvb/adapter0/frontend0) capabilities: >>> CAN_FEC_AUTO CAN_INVERSION_AUTO CAN_QAM_16 CAN_QAM_32 >>> CAN_QAM_64 CAN_QAM_128 CAN_QAM_256 CAN_QPSK >>> DVB API Version 5.6, Current v5 delivery system: DVBC/ANNEX_A >>> Supported delivery systems: [DVBC/ANNEX_A] DVBC/ANNEX_C >>> Scanning frequency #1 304000000 >>> FREQUENCY = 304000000 >>> MODULATION = QAM/64 >>> INVERSION = AUTO >>> SYMBOL_RATE = 6875000 >>> INNER_FEC = AUTO >>> DELIVERY_SYSTEM = DVBC/ANNEX_A >>> status 1f | signal 97% | snr 94% | ber 1728 | unc 62194 | FE_HAS_LOCK >>> >>> Service #0 (101) Nederland 1 channel 0.1.0 >>> Service #1 (102) Nederland 2 channel 0.2.1 >>> Service #2 (103) Nederland 3 channel 0.3.2 >>> Service #3 (8101) 100%NL channel 0.801.3 >>> Service #4 (8102) Arrow Classic Rock channel 0.802.4 >>> Service #5 (8103) Arrow Jazz channel 0.803.5 >>> Service #6 (8104) BBC radio 1 channel 0.804.6 >>> Service #7 (8105) BBC radio 2 channel 0.805.7 >>> Service #8 (8106) BBC radio 3 channel 0.806.8 >>> Service #9 (8107) BBC radio 4 channel 0.807.9 >>> Service #10 (8108) BNR channel 0.808.10 >>> Service #11 (8109) Classic FM channel 0.809.11 >>> New transponder/channel found: #2: 505937920 >>> New transponder/channel found: #3: 515112960 >>> New transponder/channel found: #4: 524288000 >>> New transponder/channel found: #5: 529530880 >>> New transponder/channel found: #6: 538705920 >>> New transponder/channel found: #7: 547880960 >>> New transponder/channel found: #8: 557056000 >>> New transponder/channel found: #9: 566231040 >>> New transponder/channel found: #10: 312000000 >>> New transponder/channel found: #11: 320000000 >>> New transponder/channel found: #12: 328000000 >>> New transponder/channel found: #13: 336000000 >>> New transponder/channel found: #14: 580648960 >>> New transponder/channel found: #15: 344000000 >>> New transponder/channel found: #16: 352000000 >>> New transponder/channel found: #17: 360000000 >>> New transponder/channel found: #18: 368000000 >>> >>> Does anyone know what I'm doing wrong? >>> Thanks, >>> >>> Jan Saris >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-media" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html