From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Jackson Subject: Re: How do you configure AM335x dts for dual ethernet ? Date: Thu, 11 Apr 2013 20:33:50 +0100 Message-ID: <5167101E.5080006@mimc.co.uk> References: <5166E16B.6040304@mimc.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from mercuryimc.plus.com ([80.229.200.144]:42248 "EHLO centos1.newflow.co.uk" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751926Ab3DKTdw (ORCPT ); Thu, 11 Apr 2013 15:33:52 -0400 Received: from [10.1.0.107] (unknown [176.62.209.156]) by centos1.newflow.co.uk (Postfix) with ESMTP id B71E126B8037 for ; Thu, 11 Apr 2013 20:33:50 +0100 (BST) In-Reply-To: <5166E16B.6040304@mimc.co.uk> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: "linux-omap@vger.kernel.org" On 11/04/13 17:14, Mark Jackson wrote: > I'm trying to work out how to setup my custom dts file to support dual ethernet. > > This is on a custom board based on the BeagleBone, but with both ethernet ports connected in MII mode. > I know this should work (since the svm has dual ethernet), so can anyone give me some pointers ? That should read "since the *starter kit* has dual ethernet". Mark J.