diff for duplicates of <516C7C43.3040105@wwwdotorg.org> diff --git a/a/1.txt b/N1/1.txt index 2a0f38f..44b3663 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -60,7 +60,7 @@ to use the same numbering for GPIOs and IRQs is just co-incidence. > Typically, in DT land a device using a gpio as an interrupt source > will have something like the following ... > -> eth@0 { +> eth at 0 { > compatible = "ks8851"; > ... > interrupt-parent = <&gpio2>; diff --git a/a/content_digest b/N1/content_digest index 1f57de7..c8fe400 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -14,24 +14,15 @@ "ref\051671D7B.5060303@wwwdotorg.org\0" "ref\0CACRpkdbf32Ef77GmXk9id9+RRjcDRTr7S+F4nznoeZU8y=BT_Q@mail.gmail.com\0" "ref\051673D70.3010503@wwwdotorg.org\0" - "ref\0CAA wP0s0e2x33jZQhFRY+Hoo61SFqYKRgWk=1mL2+DNxSDJHz+A@mail.gmail.com\0" + "ref\0CAAwP0s0e2x33jZQhFRY+Hoo61SFqYKRgWk=1mL2+DNxSDJHz+A@mail.gmail.com\0" "ref\0CACRpkda4h+qXTvsirPAS7E7sjXhMLE62q=VDy53W8UchsYjbNg@mail.gmail.com\0" "ref\0516C31C3.9040505@wwwdotorg.org\0" "ref\0516C73C6.5050409@ti.co m\0" "ref\0516C73C6.5050409@ti.com\0" - "From\0Stephen Warren <swarren@wwwdotorg.org>\0" - "Subject\0Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver\0" + "From\0swarren@wwwdotorg.org (Stephen Warren)\0" + "Subject\0[PATCH 3/5] gpio/omap: Add DT support to GPIO driver\0" "Date\0Mon, 15 Apr 2013 16:16:35 -0600\0" - "To\0Jon Hunter <jon-hunter@ti.com>\0" - "Cc\0Linus Walleij <linus.walleij@linaro.org>" - Javier Martinez Canillas <martinez.javier@gmail.com> - Grant Likely <grant.likely@secretlab.ca> - Alexandre Courbot <acourbot@nvidia.com> - Stephen Warren <swarren@nvidia.com> - Kevin Hilman <khilman@deeprootsystems.com> - devicetree-discuss@lists.ozlabs.org <devicetree-discuss@lists.ozlabs.org> - linux-omap@vger.kernel.org <linux-omap@vger.kernel.org> - " linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On 04/15/2013 03:40 PM, Jon Hunter wrote:\n" @@ -96,7 +87,7 @@ "> Typically, in DT land a device using a gpio as an interrupt source\n" "> will have something like the following ...\n" "> \n" - "> eth@0 {\n" + "> eth at 0 {\n" "> \tcompatible = \"ks8851\";\n" "> \t...\n" "> \tinterrupt-parent = <&gpio2>;\n" @@ -141,4 +132,4 @@ "gpio_request() inside some request_irq() failing, and causing the\n" device's probe() to error out. -3e7122fae90e8dd9d7c043d859d35ea95cd873a9c7306e2e1f3ee38a2ccaeef9 +a0933d9fcc3d188019eaa440342ca1b42ec9c598e1777edfe564152f5f47f249
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.