From: Jack Mitchell <ml@communistcode.co.uk>
To: openembedded-devel@lists.openembedded.org
Subject: Re: [PATCH 1/2] php: add sqlite3 and mysql PACKAGECONFIG options
Date: Tue, 23 Apr 2013 10:07:57 +0100 [thread overview]
Message-ID: <51764F6D.7040306@communistcode.co.uk> (raw)
In-Reply-To: <20130422165350.GA3217@jama>
On 22/04/13 17:53, Martin Jansa wrote:
> On Fri, Apr 19, 2013 at 11:07:11AM +0100, Jack Mitchell wrote:
>> From: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
>>
>> Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
>> ---
>> meta-oe/recipes-devtools/php/php.inc | 29 ++++++++++++++++++++---------
>> 1 file changed, 20 insertions(+), 9 deletions(-)
>>
>> diff --git a/meta-oe/recipes-devtools/php/php.inc b/meta-oe/recipes-devtools/php/php.inc
>> index 225c3d7..892a0b5 100644
>> --- a/meta-oe/recipes-devtools/php/php.inc
>> +++ b/meta-oe/recipes-devtools/php/php.inc
>> @@ -3,11 +3,11 @@ HOMEPAGE = "http://www.php.net"
>> SECTION = "console/network"
>> LICENSE = "PHP-3.0"
>> BBCLASSEXTEND = "native"
>> -DEPENDS = "zlib libxml2 virtual/libiconv php-native lemon-native mysql5 \
>> - libc-client openssl sqlite3"
>> +DEPENDS = "zlib libxml2 virtual/libiconv php-native lemon-native \
>> + libc-client openssl"
>> DEPENDS_virtclass-native = "zlib-native libxml2-native"
>>
>> -INC_PR = "r4"
>> +INC_PR = "r5"
>>
>> SRC_URI = "http://www.php.net/distributions/php-${PV}.tar.bz2"
>>
>> @@ -27,12 +27,7 @@ EXTRA_OECONF = "--enable-mbstring --enable-discard-path --enable-wddx \
>> --with-zlib --with-zlib-dir=${STAGING_LIBDIR}/.. \
>> --with-iconv=${STAGING_LIBDIR}/.. \
>> --with-libxml-dir=${STAGING_BINDIR_CROSS} \
>> - --disable-embedded-mysqli \
>> - --with-mysql="${STAGING_DIR_TARGET}${prefix}" \
>> - --with-mysqli="${STAGING_BINDIR_CROSS}/mysql_config" \
>> - --with-sqlite3=${STAGING_LIBDIR}/.. --enable-sqlite-utf8 \
>> - --with-pdo-mysql="${STAGING_BINDIR_CROSS}/mysql_config" \
>> - --with-pdo-sqlite=${STAGING_LIBDIR}/.. ${COMMON_EXTRA_OECONF} \
>> + ${COMMON_EXTRA_OECONF} \
>> "
>> EXTRA_OECONF_virtclass-native = "--with-cgi --without-libpng --without-libjpeg \
>> --with-zlib --with-zlib-dir=${STAGING_LIBDIR_NATIVE}/.. \
>> @@ -40,6 +35,22 @@ EXTRA_OECONF_virtclass-native = "--with-cgi --without-libpng --without-libjpeg \
>> ${COMMON_EXTRA_OECONF} \
>> "
>>
>> +PACKAGECONFIG ??= "mysql sqlite3"
>> +PACKAGECONFIG_class-native = ""
>> +
>> +PACKAGECONFIG[mysql] = "--with-mysql=\"${STAGING_DIR_TARGET}${prefix}\" \
>> + --with-mysqli=\"${STAGING_BINDIR_CROSS}/mysql_config\" \
>> + --with-pdo-mysql=\"${STAGING_BINDIR_CROSS}/mysql_config\" \
>> + --disable-embedded-mysqli \
>> + , \
>> + ,mysql5"
>> +
>> +PACKAGECONFIG[sqlite3] = "--with-sqlite3=${STAGING_LIBDIR}/.. \
>> + --enable-sqlite-utf8 \
>> + --with-pdo-sqlite=${STAGING_LIBDIR}/.. \
>> + , \
>> + ,sqlite3"
>> +
>> LIBS_virtclass-native = " -lxml2 "
>> LIBS_pn-php =" -lpthread "
>> export LIBS
>> --
>> 1.8.2.1
> Now target php is failing with:
> | configure:61165: result: no
> | configure:61215: error: Cannot find MySQL header files under
> "/home/jenkins/oe/shr-core-branches/shr-core/tmp-eglibc/sysroots/qemuarm/usr".
> | Note that the MySQL client library is not bundled anymore!
>
> full log here:
> qemuarm
> http://logs.nslu2-linux.org/buildlogs/oe/oe-shr-core-branches/log.world.20130422_080202.log/bitbake.world.log
>
> qemux86
> http://logs.nslu2-linux.org/buildlogs/oe/oe-shr-core-branches/log.world.20130422_125516.log/bitbake.world.log
>
I don't know what is going on here as I can't trigger it my end,
possibly a race condition? I wouldn't think so though, as mysql5 is a
direct depends of php.
[09:42:58 jack ccoR0005]$ bitbake -c cleansstate mysql5 php
Loading cache: 100%
|#################################################################################|
ETA: 00:00:00
Loaded 64 entries from dependency cache.
Parsing recipes: 100%
|###############################################################################|
Time: 00:00:15
Parsing of 852 .bb files complete (46 cached, 806 parsed). 1162 targets,
110 skipped, 0 masked, 0 errors.
WARNING: No bb files matched BBFILE_PATTERN_dblinux
'^/mnt/SSD/oe-r0005/meta-dblinux/'
Build Configuration:
BB_VERSION = "1.19.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Unknown"
TARGET_SYS = "arm-oecore-linux-gnueabi"
MACHINE = "beaglebone"
DISTRO = "dblinux"
DISTRO_VERSION = "1.0-20130423"
TUNE_FEATURES = "armv7a vfp neon"
TARGET_FPU = "vfp-neon"
meta = "master:548fdb44bed180f05255f0ec25d18e673dce19a7"
meta-webserver = "master:c56a702d21510157c753c48bcac8e21bbcd90a2b"
meta-db = "master:4b608673b2928f851d379b7b1bb2d3f18c46dbac"
meta-dblinux = "master:0abe0ab71c58cddcee35d1068f3606dacc9a1d09"
common-bsp = "master:6d12438278bbf575c43c19262d48458a90cfe2af"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing RunQueue Tasks
NOTE: Tasks Summary: Attempted 4 tasks of which 0 didn't need to be
rerun and all succeeded.
Summary: There was 1 WARNING message shown.
[09:43:42 jack ccoR0005]$ bitbake php
Loading cache: 100%
|#################################################################################|
ETA: 00:00:00
Loaded 1158 entries from dependency cache.
Parsing recipes: 100%
|###############################################################################|
Time: 00:00:01
Parsing of 852 .bb files complete (847 cached, 5 parsed). 1162 targets,
110 skipped, 0 masked, 0 errors.
WARNING: No bb files matched BBFILE_PATTERN_dblinux
'^/mnt/SSD/oe-r0005/meta-dblinux/'
Build Configuration:
BB_VERSION = "1.19.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Unknown"
TARGET_SYS = "arm-oecore-linux-gnueabi"
MACHINE = "beaglebone"
DISTRO = "dblinux"
DISTRO_VERSION = "1.0-20130423"
TUNE_FEATURES = "armv7a vfp neon"
TARGET_FPU = "vfp-neon"
meta = "master:548fdb44bed180f05255f0ec25d18e673dce19a7"
meta-webserver = "master:c56a702d21510157c753c48bcac8e21bbcd90a2b"
meta-db = "master:4b608673b2928f851d379b7b1bb2d3f18c46dbac"
meta-dblinux = "master:0abe0ab71c58cddcee35d1068f3606dacc9a1d09"
common-bsp = "master:6d12438278bbf575c43c19262d48458a90cfe2af"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Tasks Summary: Attempted 1322 tasks of which 738 didn't need to be
rerun and all succeeded.
Summary: There was 1 WARNING message shown.
[10:06:39 jack ccoR0005]$
--
Jack Mitchell (jack@embed.me.uk)
Embedded Systems Engineer
http://www.embed.me.uk
--
next prev parent reply other threads:[~2013-04-23 9:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-19 10:07 [PATCH 0/2 v4] php: add PACKAGECONFIG options Jack Mitchell
2013-04-19 10:07 ` [PATCH 1/2] php: add sqlite3 and mysql " Jack Mitchell
2013-04-22 16:53 ` Martin Jansa
2013-04-23 9:07 ` Jack Mitchell [this message]
2013-04-23 9:18 ` [meta-oe][PATCH v5] " Jack Mitchell
2013-04-23 9:20 ` Jack Mitchell
2013-04-19 10:07 ` [PATCH 2/2] php: remove non-existant configure flags and improve current ones Jack Mitchell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51764F6D.7040306@communistcode.co.uk \
--to=ml@communistcode.co.uk \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.