Re: [PATCH 1/1] usb: ehci-fsl: set INCR8 mode only on MPC512x

["tiejun.chen" <tiejun.chen@windriver.com>]

Sorry, please ignore this temporarily since looks this is already covered in tree.

I will look further into this to send another version.

Tiejun

On 04/24/2013 10:55 AM, Tiejun Chen wrote:
> commit 761bbcb7, "usb: ehci-fsl: set INCR8 mode for system bus interface
> on MPC512x", introduced to fix one MPC5121e (M36P) Errata by setting
> INCR8 mode for system bus interface on MPC512x, but we should make sure
> this is only valid for MPC512x like other parts of this commit. Otherwise
> this would issue other platforms as abnormal without this similar Errata.
>
> Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
> ---
>   drivers/usb/host/ehci-fsl.c |   10 +++++++++-
>   1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> index d81d2fc..f4f2a7b 100644
> --- a/drivers/usb/host/ehci-fsl.c
> +++ b/drivers/usb/host/ehci-fsl.c
> @@ -509,7 +509,15 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
>   	ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
>   		    hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
>
> -	ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
> +	if (of_device_is_compatible(dev->parent->of_node,
> +				    "fsl,mpc5121-usb2-dr")) {
> +		/*
> +		 * set SBUSCFG:AHBBRST so that control msgs don't
> +		 * fail when doing heavy PATA writes.
> +		 */
> +		ehci_writel(ehci, SBUSCFG_INCR8,
> +			    hcd->regs + FSL_SOC_USB_SBUSCFG);
> +	}
>
>   	/* restore EHCI registers */
>   	ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
>