From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <5178F226.7090206@xenomai.org> Date: Thu, 25 Apr 2013 11:06:46 +0200 From: Philippe Gerum MIME-Version: 1.0 References: <51778082.4060504@xenomai.org> <51779EF1.6010801@xenomai.org> <5178F16B.504@xenomai.org> In-Reply-To: <5178F16B.504@xenomai.org> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai] Spurious interrupt are raised with 2.6.1 xenomai patch List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Srikanth C Cc: Xenomai@xenomai.org On 04/25/2013 11:03 AM, Philippe Gerum wrote: > On 04/25/2013 09:57 AM, Srikanth C wrote: >> Test Results with adeos-ipipe patch: >> >> H/W Setup is same, S/W Changed to adeos-ipipe with 3.0.8 kernel. >> >> adeos-ipipe-3.0.8-powerpc-2.13-04.patch applied to 3.0.8 kernel, >> spurious interrupt is not raised with this patch. >> > > I still don't know what ppc platform you are running on, which does not > allow me to figure out which interrupt controller might be involved, and > how to try reproducing this issue. > > Again and I won't ask for this once more: > > - what is your ppc platform: 40x, 44x, 52xx, 82xx, 83xx, 85xx, 86xx, > anything else? I need the cpu type _and_ the board type. Attaching your kernel .config would provide the required information. > >> All ipipe series patches raising spurious interrupt in powerpc. >> > > The few patches > 3.0.8 you tried on your own PCI setup and kernel > configuration raise spurious interrupts on your own board, would be a > more informative way to describe the situation. > -- Philippe.