From: Larry Finger <Larry.Finger@lwfinger.net>
To: Michael Stahn <michael.stahn.42@gmail.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Subject: Re: Fwd: Realtek 8192CU not working
Date: Thu, 25 Apr 2013 18:08:53 -0500 [thread overview]
Message-ID: <5179B785.7050704@lwfinger.net> (raw)
In-Reply-To: <CALvqYaQ_z7w6yLeNb=Q7Sm=Et3Rxj+TP6vi=KcyhDpT4AmY4kA@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 423 bytes --]
On 04/24/2013 06:08 PM, Michael Stahn wrote:
> This kind of error doesn't seem to show up on the USB 2.0 interface. I
> just configured the AP for WPA+TKIP but no change. Now the Adapter
> won't connect anymore even I reload the module..pretty random error.
> I'll try some other ideas in the next days...
I found some problems today. With the attached patched, my device connects to
WEP, WPA and WPA2 networks.
Larry
[-- Attachment #2: rtl8192cu_fix_WPA_WEP --]
[-- Type: text/plain, Size: 11539 bytes --]
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
@@ -289,14 +289,30 @@ void rtl92c_set_key(struct ieee80211_hw
macaddr = cam_const_broad;
entry_id = key_index;
} else {
+ if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_MESH_POINT) {
+ entry_id = rtl_cam_get_free_entry(hw,
+ p_macaddr);
+ if (entry_id >= TOTAL_CAM_ENTRY) {
+ RT_TRACE(rtlpriv, COMP_SEC,
+ DBG_EMERG,
+ "Can not find free hw security cam entry\n");
+ return;
+ }
+ } else {
+ entry_id = CAM_PAIRWISE_KEY_POSITION;
+ }
+
key_index = PAIRWISE_KEYIDX;
- entry_id = CAM_PAIRWISE_KEY_POSITION;
is_pairwise = true;
}
}
if (rtlpriv->sec.key_len[key_index] == 0) {
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"delete one entry\n");
+ if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_MESH_POINT)
+ rtl_cam_del_entry(hw, p_macaddr);
rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
} else {
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -896,7 +896,7 @@ void rtl92cu_enable_hw_security_config(s
u8 sec_reg_value = 0x0;
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
"PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
rtlpriv->sec.pairwise_enc_algorithm,
rtlpriv->sec.group_enc_algorithm);
@@ -913,7 +913,7 @@ void rtl92cu_enable_hw_security_config(s
if (IS_NORMAL_CHIP(rtlhal->version))
sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK);
rtl_write_byte(rtlpriv, REG_CR + 1, 0x02);
- RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, "The SECR-value %x\n",
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "The SECR-value %x\n",
sec_reg_value);
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
}
@@ -1973,26 +1973,35 @@ void rtl92cu_set_hw_reg(struct ieee80211
}
}
-void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
- struct ieee80211_sta *sta,
- u8 rssi_level)
+static void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- u32 ratr_value = (u32) mac->basic_rates;
- u8 *mcsrate = mac->mcs;
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u32 ratr_value;
u8 ratr_index = 0;
u8 nmode = mac->ht_enable;
- u8 mimo_ps = 1;
- u16 shortgi_rate = 0;
- u32 tmp_ratr_value = 0;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
+ u16 shortgi_rate;
+ u32 tmp_ratr_value;
u8 curtxbw_40mhz = mac->bw_40;
- u8 curshortgi_40mhz = mac->sgi_40;
- u8 curshortgi_20mhz = mac->sgi_20;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
enum wireless_mode wirelessmode = mac->mode;
- ratr_value |= ((*(u16 *) (mcsrate))) << 12;
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_value = sta->supp_rates[1] << 4;
+ else
+ ratr_value = sta->supp_rates[0];
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ ratr_value = 0xfff;
+
+ ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
switch (wirelessmode) {
case WIRELESS_MODE_B:
if (ratr_value & 0x0000000c)
@@ -2006,7 +2015,7 @@ void rtl92cu_update_hal_rate_table(struc
case WIRELESS_MODE_N_24G:
case WIRELESS_MODE_N_5G:
nmode = 1;
- if (mimo_ps == 0) {
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
ratr_value &= 0x0007F005;
} else {
u32 ratr_mask;
@@ -2016,8 +2025,7 @@ void rtl92cu_update_hal_rate_table(struc
ratr_mask = 0x000ff005;
else
ratr_mask = 0x0f0ff005;
- if (curtxbw_40mhz)
- ratr_mask |= 0x00000010;
+
ratr_value &= ratr_mask;
}
break;
@@ -2026,41 +2034,74 @@ void rtl92cu_update_hal_rate_table(struc
ratr_value &= 0x000ff0ff;
else
ratr_value &= 0x0f0ff0ff;
+
break;
}
+
ratr_value &= 0x0FFFFFFF;
- if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) ||
- (!curtxbw_40mhz && curshortgi_20mhz))) {
+
+ if (nmode && ((curtxbw_40mhz &&
+ curshortgi_40mhz) || (!curtxbw_40mhz &&
+ curshortgi_20mhz))) {
+
ratr_value |= 0x10000000;
tmp_ratr_value = (ratr_value >> 12);
+
for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
if ((1 << shortgi_rate) & tmp_ratr_value)
break;
}
+
shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
- (shortgi_rate << 4) | (shortgi_rate);
+ (shortgi_rate << 4) | (shortgi_rate);
}
+
rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
+
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n",
+ rtl_read_dword(rtlpriv, REG_ARFR0));
}
-void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
+static void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- u32 ratr_bitmap = (u32) mac->basic_rates;
- u8 *p_mcsrate = mac->mcs;
- u8 ratr_index = 0;
- u8 curtxbw_40mhz = mac->bw_40;
- u8 curshortgi_40mhz = mac->sgi_40;
- u8 curshortgi_20mhz = mac->sgi_20;
- enum wireless_mode wirelessmode = mac->mode;
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_sta_info *sta_entry = NULL;
+ u32 ratr_bitmap;
+ u8 ratr_index;
+ u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0;
+ u8 curshortgi_40mhz = curtxbw_40mhz &&
+ (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
+ enum wireless_mode wirelessmode = 0;
bool shortgi = false;
u8 rate_mask[5];
u8 macid = 0;
- u8 mimops = 1;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
- ratr_bitmap |= (p_mcsrate[1] << 20) | (p_mcsrate[0] << 12);
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ wirelessmode = sta_entry->wireless_mode;
+ if (mac->opmode == NL80211_IFTYPE_STATION ||
+ mac->opmode == NL80211_IFTYPE_MESH_POINT)
+ curtxbw_40mhz = mac->bw_40;
+ else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC)
+ macid = sta->aid + 1;
+
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_bitmap = sta->supp_rates[1] << 4;
+ else
+ ratr_bitmap = sta->supp_rates[0];
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ ratr_bitmap = 0xfff;
+ ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
switch (wirelessmode) {
case WIRELESS_MODE_B:
ratr_index = RATR_INX_WIRELESS_B;
@@ -2071,6 +2112,7 @@ void rtl92cu_update_hal_rate_mask(struct
break;
case WIRELESS_MODE_G:
ratr_index = RATR_INX_WIRELESS_GB;
+
if (rssi_level == 1)
ratr_bitmap &= 0x00000f00;
else if (rssi_level == 2)
@@ -2085,7 +2127,8 @@ void rtl92cu_update_hal_rate_mask(struct
case WIRELESS_MODE_N_24G:
case WIRELESS_MODE_N_5G:
ratr_index = RATR_INX_WIRELESS_NGB;
- if (mimops == 0) {
+
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
if (rssi_level == 1)
ratr_bitmap &= 0x00070000;
else if (rssi_level == 2)
@@ -2128,8 +2171,10 @@ void rtl92cu_update_hal_rate_mask(struct
}
}
}
+
if ((curtxbw_40mhz && curshortgi_40mhz) ||
(!curtxbw_40mhz && curshortgi_20mhz)) {
+
if (macid == 0)
shortgi = true;
else if (macid == 1)
@@ -2138,21 +2183,39 @@ void rtl92cu_update_hal_rate_mask(struct
break;
default:
ratr_index = RATR_INX_WIRELESS_NGB;
+
if (rtlphy->rf_type == RF_1T2R)
ratr_bitmap &= 0x000ff0ff;
else
ratr_bitmap &= 0x0f0ff0ff;
break;
}
- RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "ratr_bitmap :%x\n",
- ratr_bitmap);
- *(u32 *)&rate_mask = ((ratr_bitmap & 0x0fffffff) |
- ratr_index << 28);
+ sta_entry->ratr_index = ratr_index;
+
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+ "ratr_bitmap :%x\n", ratr_bitmap);
+ *(u32 *)&rate_mask = (ratr_bitmap & 0x0fffffff) |
+ (ratr_index << 28);
rate_mask[4] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
"Rate_index:%x, ratr_val:%x, %5phC\n",
ratr_index, ratr_bitmap, rate_mask);
rtl92c_fill_h2c_cmd(hw, H2C_RA_MASK, 5, rate_mask);
+
+ if (macid != 0)
+ sta_entry->ratr_index = ratr_index;
+}
+
+void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->dm.useramask)
+ rtl92cu_update_hal_rate_mask(hw, sta, rssi_level);
+ else
+ rtl92cu_update_hal_rate_table(hw, sta);
}
void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw)
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
@@ -98,10 +98,6 @@ void rtl92cu_update_interrupt_mask(struc
u32 add_msr, u32 rm_msr);
void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
-void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
- struct ieee80211_sta *sta,
- u8 rssi_level);
-void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level);
void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw);
bool rtl92cu_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 * valid);
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -106,8 +106,7 @@ static struct rtl_hal_ops rtl8192cu_hal_
.update_interrupt_mask = rtl92cu_update_interrupt_mask,
.get_hw_reg = rtl92cu_get_hw_reg,
.set_hw_reg = rtl92cu_set_hw_reg,
- .update_rate_tbl = rtl92cu_update_hal_rate_table,
- .update_rate_mask = rtl92cu_update_hal_rate_mask,
+ .update_rate_tbl = rtl92cu_update_hal_rate_tbl,
.fill_tx_desc = rtl92cu_tx_fill_desc,
.fill_fake_txdesc = rtl92cu_fill_fake_txdesc,
.fill_tx_cmddesc = rtl92cu_tx_fill_cmddesc,
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h
@@ -49,5 +49,8 @@ bool rtl92cu_phy_set_rf_power_state(stru
u32 rtl92cu_phy_query_rf_reg(struct ieee80211_hw *hw,
enum radio_path rfpath, u32 regaddr, u32 bitmask);
void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
+void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level);
#endif
next prev parent reply other threads:[~2013-04-25 23:08 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CALvqYaTZrtSsP9GQzH4B988KjPg+LRCcyREKZ1zkjoaEDKPHNA@mail.gmail.com>
2013-04-24 14:16 ` Fwd: Realtek 8192CU not working Michael Stahn
2013-04-24 14:49 ` Larry Finger
[not found] ` <CALvqYaQt+nL-PxSeEUNpsG9SWV+--S64ksr1UR+8TPg5dVPKXA@mail.gmail.com>
2013-04-24 16:47 ` Larry Finger
2013-04-24 17:19 ` Michael Stahn
2013-04-24 17:27 ` Michael Stahn
2013-04-24 17:42 ` Larry Finger
[not found] ` <CALvqYaQTQ5=ER=F1-bxnJQKkFjrg6UH+1JWLexUPVZ3cFBG5UQ@mail.gmail.com>
[not found] ` <51786303.3070107@lwfinger.net>
2013-04-24 23:08 ` Michael Stahn
2013-04-24 23:18 ` Larry Finger
2013-04-25 23:08 ` Larry Finger [this message]
2013-04-26 10:42 ` Michael Stahn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5179B785.7050704@lwfinger.net \
--to=larry.finger@lwfinger.net \
--cc=linux-wireless@vger.kernel.org \
--cc=michael.stahn.42@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.