Re: [PATCH net 3/3] cxgb4vf: Support CPL_SGE_EGR_UPDATEs encapsulated in a CPL_FW4_MSG

[Vipul Pandya <vipul@chelsio.com>]

On 30-04-2013 00:25, Sergei Shtylyov wrote:
> Hello.
> 
> On 04/29/2013 06:04 PM, Vipul Pandya wrote:
> 
>> Newer firmware can post CPL_SGE_EGR_UPDATE message encapsulated in a
>> CPL_FW4_MSG as follows
>>
>> flit0 rss_header (if DropRSS == 0 in IQ context)
>> flit1 CPL_FW4_MSG cpl
>> flit2 rss_header w/opcode CPL_SGE_EGR_UPDATE
>> flit3 CPL_SGE_EGR_UPDATE cpl
>>
>> So FW4_MSG CPLs with a newly created type of FW_TYPE_RSSCPL have the
>> CPL_SGE_EGR_UPDATE CPL message in flit 2 of the FW4_MSG. Firmware can still
>> post regular CPL_SGE_EGR_UPDATE messages, so the drivers need to handle
>> both.
>>
>> This patch also writes a new parameter to firmware requesting encapsulated
>> EGR_UPDATE. This allows firmware with this support to not break older drivers.
>>
>> Signed-off-by: Vipul Pandya <vipul@chelsio.com>
> 
> [...]
> 
>> diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
>> index 73aef76..40c22e7 100644
>> --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
>> +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
>> @@ -409,6 +409,20 @@ static int fwevtq_handler(struct sge_rspq *rspq, const __be64 *rsp,
>>   		break;
>>   	}
>>   
>> +	case CPL_FW4_MSG: {
>> +		/* FW can send EGR_UPDATEs encapsulated in a CPL_FW4_MSG.
>> +		 */
>> +		const struct cpl_sge_egr_update *p = (void *)(rsp + 3);
> 
>      Empty line wouldn't hurt here, after the declaration.
> 
>> +		opcode = G_CPL_OPCODE(ntohl(p->opcode_qid));
>> +		if (opcode != CPL_SGE_EGR_UPDATE) {
>> +			dev_err(adapter->pdev_dev, "unexpected FW4/CPL %#x on FW event queue\n"
>> +				, opcode);
>> +			break;
>> +		}
>> +		cpl = (void *)p;
>> +		/*FALLTHROUGH*/
> 
>     Rather pointless comment at end of *switch*. Adn you forgot to add 
> spaced before */ and after /*.
> 
>> +	}
>> +
>>   	case CPL_SGE_EGR_UPDATE: {
>>   		/*
>>   		 * We've received an Egress Queue Status Update message.  We
> [...]
> 
> WBR, Sergei
> 

Hello Sergei,

Thank you for your comments. I will take care and address them in future.

Thanks,
Vipul