[PATCH v3 08/32] arm64: KVM: architecture specific MMU backend

[marc.zyngier@arm.com (Marc Zyngier)]

On 29/04/13 18:35, Catalin Marinas wrote:
> On Mon, Apr 08, 2013 at 05:17:10PM +0100, Marc Zyngier wrote:
>> diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
>> new file mode 100644
>> index 0000000..2eb2230
>> --- /dev/null
>> +++ b/arch/arm64/include/asm/kvm_mmu.h
> ...
>> +/*
>> + * Align KVM with the kernel's view of physical memory. Should be
>> + * 40bit IPA, with PGD being 8kB aligned.
>> + */
>> +#define KVM_PHYS_SHIFT	PHYS_MASK_SHIFT
> 
> Just wondering - do we allow the IPA to be bigger than what qemu/kvmtool
> can map?
> 
>> +#define KVM_PHYS_SIZE	(1UL << KVM_PHYS_SHIFT)
>> +#define KVM_PHYS_MASK	(KVM_PHYS_SIZE - 1UL)
>> +
>> +#ifdef CONFIG_ARM64_64K_PAGES
>> +#define PAGE_LEVELS	2
>> +#define BITS_PER_LEVEL	13
>> +#else  /* 4kB pages */
>> +#define PAGE_LEVELS	3
>> +#define BITS_PER_LEVEL	9
> 
> You could use (PAGE_SHIFT - 3) for BITS_PER_LEVEL if that's any clearer
> but you can get rid of these entirely (see below).
> 
>> +#endif
>> +
>> +/* Make sure we get the right size, and thus the right alignment */
>> +#define BITS_PER_S2_PGD (KVM_PHYS_SHIFT - (PAGE_LEVELS - 1) * BITS_PER_LEVEL - PAGE_SHIFT)
>> +#define PTRS_PER_S2_PGD (1 << max(BITS_PER_LEVEL, BITS_PER_S2_PGD))
>> +#define S2_PGD_ORDER	get_order(PTRS_PER_S2_PGD * sizeof(pgd_t))
>> +#define S2_PGD_SIZE	(1 << S2_PGD_ORDER)
> 
> It looks like lots of calculations which I can't fully follow ;). So we
> need to map KVM_PHYS_SHIFT (40-bit) with a number of stage 2 pgds. We
> know that a pgd entry can map PGDIR_SHIFT bits. So the pointers you need
> in S2 pgd:
> 
> #define PTRS_PER_S2_PGD		(1 << (KVM_PHYS_SHIFT - PGDIR_SHIFT))
> 
> (no need of PAGE_LEVELS)

Now you're ruining all the fun! ;-) You make it look simple and elegant,
which sucks in a major way!

> With some more juggling you can probably get rid of get_order as well,
> though it should be a compile-time constant. Basically KVM_PHYS_SHIFT -
> PGDIR_SHIFT - PAGE_SHIFT + 3 (and cope with the negative value for the
> 64K pages).

get_order seems to do the right thing, and I'm now almost convinced I
can loose the max. Almost. Hmmm.

>> +static inline void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn)
>> +{
>> +	unsigned long hva = gfn_to_hva(kvm, gfn);
>> +	flush_icache_range(hva, hva + PAGE_SIZE);
> 
> Even ARMv8 can have aliasing VIPT I-cache. Do we need to flush some more
> here?

Definitely. We should have something similar to what we have for ARMv7.

>> +#define kvm_flush_dcache_to_poc(a,l)	__flush_dcache_area((a), (l))
> 
> I had a brief look at the other hyp reworking patches and this function
> is used in two situations: (1) flush any data before the Hyp is
> initialised and (2) page table creation. The first case looks fine but
> the second is not needed on AArch64 (and SMP AArch32) nor entirely
> optimal as it should flush to PoU for page table walks. Can we have
> different functions, at least we can make one a no-op?

Certainly. I think Will has some patches that we could reuse (at least
in principle) for AArch32, and have a no-op backend for AArch64.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...