From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jaehoon Chung Date: Fri, 03 May 2013 11:27:02 +0900 Subject: [U-Boot] Regression from v2013.04-rc3 with sdcard detection In-Reply-To: <5182A7FD.1020706@wwwdotorg.org> References: <5182A7FD.1020706@wwwdotorg.org> Message-ID: <51832076.2050503@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 05/03/2013 02:53 AM, Stephen Warren wrote: > On 04/21/2013 11:29 AM, Nicolas Chauvet wrote: >> Hi, >> >> I'm experiencing a regression from v2013.04-rc3 that I found related to the >> following commit: >> >> 64f4a6192f0670de2d9af98900b750a3e7bf8ce6 >> 1741c64d642a95c4bb88a2b03e96c6dc7ed5fe62 >> >> With v2013.04 release, when trying to boot from sdcard, I have: >> "Card did not respond to voltage select" >> while detecting the sdcard as mmc 1 Well, i didn't think it is related with that commit. Those patches is just checking revision. And That message is produced that card didn't complete the power-up processing. As Stephen said, which card do you use? If you give more information to us, it is helpful. Best Regards, Jaehoon Chung >> >> Without theses commit or with v2013.04-rc3 >> **File not found /boot.scr.uimg *** >> .and then it find /boot.src on the sdcard. >> >> This was experienced on the Toshiba AC100, aka paz00 using a tegra20 arm >> chipset. > > I can't reproduce this problem with either v2013.04 or the latest > u-boot/master (971020c "sandbox: config: Enable CONFIG_FIT and > CONFIG_CMD_FIT"). Perhaps it depends on the specs of the SD card you > use; what are yours? > > Also, you didn't Cc anyone involved in Tegra, MMC, or the patches you're > reporting problems with. I have added them to this message. Most likely, > nobody saw your email. I only happened to since I returned from > vacation, and searched my list folder for any mention of Tegra. > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >