[U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration

[Stefano Babic <sbabic@denx.de>]

On 29/04/2013 02:17, Marek Vasut wrote:
> The VDDMEM ramped up in very weird way as it was horribly misconfigured.
> Instead of setting up VDDMEM in one swipe, let it rise slowly the same
> way as VDDD and VDDA in spl_power_init.c and then only clear ILIMIT before
> memory gets inited. This makes sure the VDDMEM rises sanely, not jumps up
> and down as it did till now.
> 
> The VDDMEM prior to this change did this:
>      2V0____   .--------2V5
>        |    `--'
>  0V____|
> 
> The VDDMEM now does this:
>     2V0_____,-----------2V5
>       /
>  0V__|
> 
> Moreover, VDDIO on MX23 uses 25mV steps while MX28 uses 50mV steps,
> fix this difference too.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Otavio Salvador <otavio@ossystems.com.br>
> Cc: Stefano Babic <sbabic@denx.de>
> ---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic



-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================