From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Greear Date: Mon, 06 May 2013 07:23:01 -0700 Subject: [ath9k-devel] AR9380 frequent disconnect and stucks in AP mode. In-Reply-To: <20130506141216.9A3CD3067CB@venema.h4ckr.net> References: <20130506141216.9A3CD3067CB@venema.h4ckr.net> Message-ID: <5187BCC5.3010609@candelatech.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org On 05/06/2013 07:03 AM, Bhavesh Kamani wrote: > Hi Team, > > I have AR9380 as an AP(using hostapd and ath9k) and more than 15 to 20 clients are connected to it. > > Few clients are disconnecting frequently and hostapd/ath9k is not logging any message for disconnection. Immediately those clients connects to AP. > > I can say it is a signal strength OR heavy interference issue for few clients, but many times clients are getting locked. > > In the locked state, hostapd and debugfs of driver has client mac entry, even on windows client utility it is showing as connected, but I am not able to ping AP > from the client. > > In this locked state clients will remain for more then 10 mins and no traffic is passing, but inactive time is continuously updating on AP side. > > I am using hostapd-1.0 and compact-wireless-2.6.39.1. Please provide me patch OR workaround for this locking state. Try a recent kernel...lots of fixes have gone in since the 2.6 series... Thanks, Ben > > Thanks, > > Bhavesh. > > > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > -- Ben Greear Candela Technologies Inc http://www.candelatech.com