From mboxrd@z Thu Jan 1 00:00:00 1970 From: Larry Finger Date: Mon, 06 May 2013 22:06:23 -0500 Subject: linux-next: Tree for May 6 (b43/bcma) In-Reply-To: <5187EB95.2060605@infradead.org> References: <20130506144207.c812a0227d7763d26e5fec80@canb.auug.org.au> <5187EB95.2060605@infradead.org> Message-ID: <51886FAF.1030801@lwfinger.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Randy Dunlap Cc: Stephen Rothwell , linux-next-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-wireless , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, b43-dev-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org On 05/06/2013 12:42 PM, Randy Dunlap wrote: > > on x86_64: > > drivers/built-in.o: In function `b43_gpio_cleanup.isra.40': > main.c:(.text+0x1b425b): undefined reference to `bcma_chipco_gpio_control' > drivers/built-in.o: In function `b43_wireless_core_reset': > (.text+0x1b5fb6): undefined reference to `bcma_core_set_clockmode' > drivers/built-in.o: In function `b43_wireless_core_reset': > (.text+0x1b6058): undefined reference to `bcma_core_pll_ctl' > drivers/built-in.o: In function `b43_chip_init': > main.c:(.text+0x1b8444): undefined reference to `bcma_chipco_gpio_control' > drivers/built-in.o: In function `b43_wireless_core_init': > main.c:(.text+0x1b887b): undefined reference to `bcma_core_pci_irq_ctl' > drivers/built-in.o: In function `b43_bus_bcma_device_disable': > bus.c:(.text+0x1b9d46): undefined reference to `bcma_core_disable' > drivers/built-in.o: In function `b43_bus_bcma_device_enable': > bus.c:(.text+0x1b9d55): undefined reference to `bcma_core_enable' > drivers/built-in.o: In function `b43_bus_bcma_device_is_enabled': > bus.c:(.text+0x1b9d64): undefined reference to `bcma_core_is_enabled' > drivers/built-in.o: In function `b43_nphy_channel_setup': > phy_n.c:(.text+0x1c8fe5): undefined reference to `bcma_pmu_spuravoid_pllupdate' > drivers/built-in.o: In function `b43_phy_initn': > phy_n.c:(.text+0x1cb853): undefined reference to `bcma_chipco_gpio_control' > drivers/built-in.o: In function `b43_dma_init': > (.text+0x1d5790): undefined reference to `bcma_core_dma_translation' > drivers/built-in.o: In function `b43_init': > main.c:(.init.text+0xa07a): undefined reference to `__bcma_driver_register' > main.c:(.init.text+0xa09f): undefined reference to `bcma_driver_unregister' > drivers/built-in.o: In function `b43_exit': > main.c:(.exit.text+0x153a): undefined reference to `bcma_driver_unregister' > > > Probably mostly due to B43=y and BCMA=m. Does any Kconfig wizard know the magic incantation to accomplish the following: 1. Ensure that if SSB and BMCA are both selected, then both are either "m" or "y" 2. Ensure that BRCMSMAC is not "y" if BMCA is "m". 3. Ensure that B43 is not "y" if SSB and/or BCMA is "m". Thanks, Larry From mboxrd@z Thu Jan 1 00:00:00 1970 From: Larry Finger Subject: Re: linux-next: Tree for May 6 (b43/bcma) Date: Mon, 06 May 2013 22:06:23 -0500 Message-ID: <51886FAF.1030801@lwfinger.net> References: <20130506144207.c812a0227d7763d26e5fec80@canb.auug.org.au> <5187EB95.2060605@infradead.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <5187EB95.2060605-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "b43-dev" Errors-To: b43-dev-bounces+gldbd-bcm43xx-dev=gmane.org-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org To: Randy Dunlap Cc: Stephen Rothwell , linux-next-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-wireless , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, b43-dev-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: linux-next.vger.kernel.org On 05/06/2013 12:42 PM, Randy Dunlap wrote: > > on x86_64: > > drivers/built-in.o: In function `b43_gpio_cleanup.isra.40': > main.c:(.text+0x1b425b): undefined reference to `bcma_chipco_gpio_control' > drivers/built-in.o: In function `b43_wireless_core_reset': > (.text+0x1b5fb6): undefined reference to `bcma_core_set_clockmode' > drivers/built-in.o: In function `b43_wireless_core_reset': > (.text+0x1b6058): undefined reference to `bcma_core_pll_ctl' > drivers/built-in.o: In function `b43_chip_init': > main.c:(.text+0x1b8444): undefined reference to `bcma_chipco_gpio_control' > drivers/built-in.o: In function `b43_wireless_core_init': > main.c:(.text+0x1b887b): undefined reference to `bcma_core_pci_irq_ctl' > drivers/built-in.o: In function `b43_bus_bcma_device_disable': > bus.c:(.text+0x1b9d46): undefined reference to `bcma_core_disable' > drivers/built-in.o: In function `b43_bus_bcma_device_enable': > bus.c:(.text+0x1b9d55): undefined reference to `bcma_core_enable' > drivers/built-in.o: In function `b43_bus_bcma_device_is_enabled': > bus.c:(.text+0x1b9d64): undefined reference to `bcma_core_is_enabled' > drivers/built-in.o: In function `b43_nphy_channel_setup': > phy_n.c:(.text+0x1c8fe5): undefined reference to `bcma_pmu_spuravoid_pllupdate' > drivers/built-in.o: In function `b43_phy_initn': > phy_n.c:(.text+0x1cb853): undefined reference to `bcma_chipco_gpio_control' > drivers/built-in.o: In function `b43_dma_init': > (.text+0x1d5790): undefined reference to `bcma_core_dma_translation' > drivers/built-in.o: In function `b43_init': > main.c:(.init.text+0xa07a): undefined reference to `__bcma_driver_register' > main.c:(.init.text+0xa09f): undefined reference to `bcma_driver_unregister' > drivers/built-in.o: In function `b43_exit': > main.c:(.exit.text+0x153a): undefined reference to `bcma_driver_unregister' > > > Probably mostly due to B43=y and BCMA=m. Does any Kconfig wizard know the magic incantation to accomplish the following: 1. Ensure that if SSB and BMCA are both selected, then both are either "m" or "y" 2. Ensure that BRCMSMAC is not "y" if BMCA is "m". 3. Ensure that B43 is not "y" if SSB and/or BCMA is "m". Thanks, Larry From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-gg0-f170.google.com ([209.85.161.170]:48000 "EHLO mail-gg0-f170.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756766Ab3EGDLy (ORCPT ); Mon, 6 May 2013 23:11:54 -0400 Message-ID: <51886FAF.1030801@lwfinger.net> (sfid-20130507_051212_785834_D4BC17E9) Date: Mon, 06 May 2013 22:06:23 -0500 From: Larry Finger MIME-Version: 1.0 To: Randy Dunlap CC: Stephen Rothwell , linux-next@vger.kernel.org, linux-kernel@vger.kernel.org, linux-wireless , b43-dev@lists.infradead.org Subject: Re: linux-next: Tree for May 6 (b43/bcma) References: <20130506144207.c812a0227d7763d26e5fec80@canb.auug.org.au> <5187EB95.2060605@infradead.org> In-Reply-To: <5187EB95.2060605@infradead.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: On 05/06/2013 12:42 PM, Randy Dunlap wrote: > > on x86_64: > > drivers/built-in.o: In function `b43_gpio_cleanup.isra.40': > main.c:(.text+0x1b425b): undefined reference to `bcma_chipco_gpio_control' > drivers/built-in.o: In function `b43_wireless_core_reset': > (.text+0x1b5fb6): undefined reference to `bcma_core_set_clockmode' > drivers/built-in.o: In function `b43_wireless_core_reset': > (.text+0x1b6058): undefined reference to `bcma_core_pll_ctl' > drivers/built-in.o: In function `b43_chip_init': > main.c:(.text+0x1b8444): undefined reference to `bcma_chipco_gpio_control' > drivers/built-in.o: In function `b43_wireless_core_init': > main.c:(.text+0x1b887b): undefined reference to `bcma_core_pci_irq_ctl' > drivers/built-in.o: In function `b43_bus_bcma_device_disable': > bus.c:(.text+0x1b9d46): undefined reference to `bcma_core_disable' > drivers/built-in.o: In function `b43_bus_bcma_device_enable': > bus.c:(.text+0x1b9d55): undefined reference to `bcma_core_enable' > drivers/built-in.o: In function `b43_bus_bcma_device_is_enabled': > bus.c:(.text+0x1b9d64): undefined reference to `bcma_core_is_enabled' > drivers/built-in.o: In function `b43_nphy_channel_setup': > phy_n.c:(.text+0x1c8fe5): undefined reference to `bcma_pmu_spuravoid_pllupdate' > drivers/built-in.o: In function `b43_phy_initn': > phy_n.c:(.text+0x1cb853): undefined reference to `bcma_chipco_gpio_control' > drivers/built-in.o: In function `b43_dma_init': > (.text+0x1d5790): undefined reference to `bcma_core_dma_translation' > drivers/built-in.o: In function `b43_init': > main.c:(.init.text+0xa07a): undefined reference to `__bcma_driver_register' > main.c:(.init.text+0xa09f): undefined reference to `bcma_driver_unregister' > drivers/built-in.o: In function `b43_exit': > main.c:(.exit.text+0x153a): undefined reference to `bcma_driver_unregister' > > > Probably mostly due to B43=y and BCMA=m. Does any Kconfig wizard know the magic incantation to accomplish the following: 1. Ensure that if SSB and BMCA are both selected, then both are either "m" or "y" 2. Ensure that BRCMSMAC is not "y" if BMCA is "m". 3. Ensure that B43 is not "y" if SSB and/or BCMA is "m". Thanks, Larry