All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sricharan R <r.sricharan@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Reading uninitialized SDRAM values on OMAP4460 (PandaBoard)
Date: Thu, 9 May 2013 18:29:43 +0530	[thread overview]
Message-ID: <518B9DBF.6010600@ti.com> (raw)
In-Reply-To: <CAKz=uXFRRAnwuoQ0A4u6=oS5Q=U_2ATYxDk5SupzyXA0S-cT0Q@mail.gmail.com>

On Wednesday 08 May 2013 06:54 PM, An Schall wrote:
> Hi there,
>
> my task is to output the uninitialized SDRAM values over UART during device
> startup.
>
> Therefore, I first searched for the code that handles the SDRAM
> initialization since I have to put my code in front of it. After digging
> through the code and reading some mailing list entries, I guess it takes
> place either in:
>
> arch/arm/cpu/armv7/start.S: after line 159 (after CPU was set to SVC3232
> mode)
>
> or
>
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S (which is quiet confusing to
> me).
>
> I guess it takes place in start.S. If you could confirm this, it would be
> very helpful.ti
>
> Next, I need to configure UART so I can iterate over the SDRAM and put each
> single byte on UART.
>
> Do you have any information where I can find info on how to write ASM to
> configure UART? ARM helpcenter is way too huge to find info in reasonable
> time.
>
> Thanks in advance,
> Andr?
>
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
 If your task is print the the uninitialised EMIF registers, then just
 add prints before the function sdram_init() in s_init

  arch/arm/cpu/armv7/omap-common/hwinit-common.c

Regards,
 Sricharan

  reply	other threads:[~2013-05-09 12:59 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-08 13:24 [U-Boot] Reading uninitialized SDRAM values on OMAP4460 (PandaBoard) An Schall
2013-05-09 12:59 ` Sricharan R [this message]
2013-05-17  8:01   ` André Schaller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=518B9DBF.6010600@ti.com \
    --to=r.sricharan@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.