From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from santino.mail.tiscali.it (santino.mail.tiscali.it [213.205.33.245]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id 01B67E0051D for ; Fri, 10 May 2013 10:51:14 -0700 (PDT) Received: from [192.168.1.72] ([94.38.121.206]) by santino.mail.tiscali.it with id aHrB1l00D4THF2u01HrC3u; Fri, 10 May 2013 19:51:13 +0200 x-auth-user: a.sterbini@tiscali.it Message-ID: <518D338F.8030008@tiscali.it> Date: Fri, 10 May 2013 19:51:11 +0200 From: Andrea Sterbini User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130402 Thunderbird/17.0.5 MIME-Version: 1.0 To: Elvis Dowson References: <518CFDE7.2030606@tiscali.it> <5518E211-421C-4289-AB1B-80AA40AF87B3@gmail.com> In-Reply-To: <5518E211-421C-4289-AB1B-80AA40AF87B3@gmail.com> Cc: yocto@yoctoproject.org Subject: Re: Problems building yocto for Xilinx ML507 (with some tentative fixes) X-BeenThere: yocto@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Discussion of all things Yocto Project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 10 May 2013 17:51:15 -0000 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Not yet. I haven't been able to complete the complete run bitbake core-image-minimal I moved to the meta-xilinx master branch I am able to complete almost 1600 tasks of 1666 by doing (after the git.xilinx.com -> github.com/Xilinx fixes) bitbake core-image-minimal -k The error I get is > Build Configuration: > BB_VERSION = "1.19.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "Fedora-18" > TARGET_SYS = "powerpc-poky-linux" > MACHINE = "virtex-5-ml507-powerpc-440" > DISTRO = "poky" > DISTRO_VERSION = "1.3+snapshot-20130510" > TUNE_FEATURES = "m32 ppc440 fpu-soft" > TARGET_FPU = "soft" > meta > meta-yocto > meta-yocto-bsp = "master:88a7b041fbf2583472aa9408a33dd8881223a0c1" > toolchain-layer = "master:cc0067dc0c7ea469057238db6422864d1bce311c" > toolchain-layer = "master:cd5f284730a6430d563443786c409aa6783d4b04" > meta-xilinx = "master:4f1a74f86c402e0810e84ab0588b5de2ca9ccfff" > meta-angstrom = "master:fe82cbd08eef51cd5d5a38c1cd0ed6ce7e57fb18" --- a lot of diagnostic messages later > ERROR: Function failed: do_configure (see > /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 > for further information) > ERROR: Logfile of failure stored in: > /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 > Log data follows: > | DEBUG: Executing python function sysroot_cleansstate > | DEBUG: Python function sysroot_cleansstate finished > | DEBUG: Executing shell function do_configure > | NOTE: Replacing xparameters header to match hardware model > | > /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130: > line 157: > /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h: > Not a directory > | ERROR: Function failed: do_configure (see > /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 > for further information) > ERROR: Task 79 > (/home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb, > do_configure) failed with exit code '1' > ERROR: Function failed: do_compile (see > /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 > for further information) > ERROR: Logfile of failure stored in: > /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 > Log data follows: > | DEBUG: Executing shell function do_compile > | NOTE: make -j 4 uImage CC=powerpc-poky-linux-gcc > LD=powerpc-poky-linux-ld.bfd > | scripts/kconfig/conf --silentoldconfig Kconfig > | *** > | *** Configuration file ".config" not found! > | *** > | *** Please run some configurator (e.g. "make oldconfig" or > | *** "make menuconfig" or "make xconfig"). > | *** > | make[2]: *** [silentoldconfig] Error 1 > | make[1]: *** [silentoldconfig] Error 2 > | make: *** No rule to make target `include/config/auto.conf', needed > by `include/config/kernel.release'. Stop. > | make: *** Waiting for unfinished jobs.... > | ERROR: oe_runmake failed > | ERROR: Function failed: do_compile (see > /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 > for further information) > ERROR: Task 811 > (/home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb, > do_compile) failed with exit code '1' > NOTE: Tasks Summary: Attempted 1662 tasks of which 1660 didn't need to > be rerun and 2 failed. > Waiting for 0 running tasks to finish: > > Summary: 2 tasks failed: > /home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb, > do_configure > /home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb, > do_compile > Summary: There were 2 ERROR messages shown, returning a non-zero exit > code. All the best Andrea On Fri 10 May 2013 05:11:48 PM CEST, Elvis Dowson wrote: > > Hi Andrea, > > On May 10, 2013, at 6:02 PM, Andrea Sterbini > wrote: > >> >> The problems I have found (and someway fixed) are: >> >> 1) when I do "bitbake meta-toolchain" I get an error complaining that >> the compiler is not able to build for powerpc with FPU >> Fix: I have changed the ml507 rules to include just the soft FPU > > > I never did get soft-float to work properly with gcc-4.6 or gcc-4.7. I > got soft-float to work with gcc-4.5.4. > > hard float fpu support worked with gcc-4.7. > > Were you able to boot and login to the command prompt with the > generated images ? > > Best regards, > > Elvis Dowson