From: Lars-Peter Clausen <lars@metafoo.de>
To: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org,
Rajeev Kumar <rajeev-dlh.kumar@st.com>,
Ryan Mallon <rmallon@gmail.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Hartley Sweeten <hsweeten@visionengravers.com>,
Shawn Guo <shawn.guo@linaro.org>
Subject: Re: [PATCH 5/8] ASoC: ep93xx: Setup dma data in DAI probe
Date: Mon, 13 May 2013 09:27:09 +0200 [thread overview]
Message-ID: <519095CD.3080606@metafoo.de> (raw)
In-Reply-To: <1366478947-9377-5-git-send-email-lars@metafoo.de>
On 04/20/2013 07:29 PM, Lars-Peter Clausen wrote:
> This allows us to access the DAI DMA data when we create the PCM. We'll use
> this when converting ep39xx to generic DMA engine PCM driver.
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
>
Hi Mark,
it looks like this patch was lost. The next one in this series which has a
dependency on this one was applied though. Should I resend the patch?
- Lars
> ---
> Changes since v1:
> * Fix a mis-rebase which mixed up bits from this patch with the next one
> ---
> sound/soc/cirrus/ep93xx-ac97.c | 14 ++++----------
> sound/soc/cirrus/ep93xx-i2s.c | 14 ++++----------
> 2 files changed, 8 insertions(+), 20 deletions(-)
>
> diff --git a/sound/soc/cirrus/ep93xx-ac97.c b/sound/soc/cirrus/ep93xx-ac97.c
> index 8d30886..38cf335 100644
> --- a/sound/soc/cirrus/ep93xx-ac97.c
> +++ b/sound/soc/cirrus/ep93xx-ac97.c
> @@ -314,22 +314,15 @@ static int ep93xx_ac97_trigger(struct snd_pcm_substream *substream,
> return 0;
> }
>
> -static int ep93xx_ac97_startup(struct snd_pcm_substream *substream,
> - struct snd_soc_dai *dai)
> +static int ep93xx_ac97_dai_probe(struct snd_soc_dai *dai)
> {
> - struct ep93xx_dma_data *dma_data;
> + dai->playback_dma_data = &ep93xx_ac97_pcm_out;
> + dai->capture_dma_data = &ep93xx_ac97_pcm_in;
>
> - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> - dma_data = &ep93xx_ac97_pcm_out;
> - else
> - dma_data = &ep93xx_ac97_pcm_in;
> -
> - snd_soc_dai_set_dma_data(dai, substream, dma_data);
> return 0;
> }
>
> static const struct snd_soc_dai_ops ep93xx_ac97_dai_ops = {
> - .startup = ep93xx_ac97_startup,
> .trigger = ep93xx_ac97_trigger,
> };
>
> @@ -337,6 +330,7 @@ static struct snd_soc_dai_driver ep93xx_ac97_dai = {
> .name = "ep93xx-ac97",
> .id = 0,
> .ac97_control = 1,
> + .probe = ep93xx_ac97_dai_probe,
> .playback = {
> .stream_name = "AC97 Playback",
> .channels_min = 2,
> diff --git a/sound/soc/cirrus/ep93xx-i2s.c b/sound/soc/cirrus/ep93xx-i2s.c
> index 83075b3..e17b905 100644
> --- a/sound/soc/cirrus/ep93xx-i2s.c
> +++ b/sound/soc/cirrus/ep93xx-i2s.c
> @@ -60,7 +60,6 @@ struct ep93xx_i2s_info {
> struct clk *mclk;
> struct clk *sclk;
> struct clk *lrclk;
> - struct ep93xx_dma_data *dma_data;
> void __iomem *regs;
> };
>
> @@ -139,15 +138,11 @@ static void ep93xx_i2s_disable(struct ep93xx_i2s_info *info, int stream)
> }
> }
>
> -static int ep93xx_i2s_startup(struct snd_pcm_substream *substream,
> - struct snd_soc_dai *dai)
> +static int ep93xx_i2s_dai_probe(struct snd_soc_dai *dai)
> {
> - struct snd_soc_pcm_runtime *rtd = substream->private_data;
> - struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
> - struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
> + dai->playback_dma_data = &ep93xx_i2s_dma_data[SNDRV_PCM_STREAM_PLAYBACK];
> + dai->capture_dma_data = &ep93xx_i2s_dma_data[SNDRV_PCM_STREAM_CAPTURE];
>
> - snd_soc_dai_set_dma_data(cpu_dai, substream,
> - &info->dma_data[substream->stream]);
> return 0;
> }
>
> @@ -338,7 +333,6 @@ static int ep93xx_i2s_resume(struct snd_soc_dai *dai)
> #endif
>
> static const struct snd_soc_dai_ops ep93xx_i2s_dai_ops = {
> - .startup = ep93xx_i2s_startup,
> .shutdown = ep93xx_i2s_shutdown,
> .hw_params = ep93xx_i2s_hw_params,
> .set_sysclk = ep93xx_i2s_set_sysclk,
> @@ -349,6 +343,7 @@ static const struct snd_soc_dai_ops ep93xx_i2s_dai_ops = {
>
> static struct snd_soc_dai_driver ep93xx_i2s_dai = {
> .symmetric_rates= 1,
> + .probe = ep93xx_i2s_dai_probe,
> .suspend = ep93xx_i2s_suspend,
> .resume = ep93xx_i2s_resume,
> .playback = {
> @@ -403,7 +398,6 @@ static int ep93xx_i2s_probe(struct platform_device *pdev)
> }
>
> dev_set_drvdata(&pdev->dev, info);
> - info->dma_data = ep93xx_i2s_dma_data;
>
> err = snd_soc_register_dai(&pdev->dev, &ep93xx_i2s_dai);
> if (err)
next prev parent reply other threads:[~2013-05-13 7:27 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-20 17:29 [PATCH 1/8] ASoC: generic-dmaengine-pcm: Add support for half-duplex Lars-Peter Clausen
2013-04-20 17:29 ` [PATCH 2/8] ASoC: mxs-pcm: Set SNDRV_PCM_INFO_HALF_DUPLEX Lars-Peter Clausen
2013-04-22 10:28 ` Mark Brown
2013-04-20 17:29 ` [PATCH 3/8] ASoC: mxs: Setup dma data in DAI probe Lars-Peter Clausen
2013-04-22 10:28 ` Mark Brown
2013-04-20 17:29 ` [PATCH 4/8] ASoC: mxs: Use generic dmaengine PCM Lars-Peter Clausen
2013-04-22 10:29 ` Mark Brown
2013-04-20 17:29 ` [PATCH 5/8] ASoC: ep93xx: Setup dma data in DAI probe Lars-Peter Clausen
2013-05-13 7:27 ` Lars-Peter Clausen [this message]
2013-05-13 13:33 ` Mark Brown
2013-05-13 14:21 ` Mark Brown
2013-05-13 18:47 ` Lars-Peter Clausen
2013-04-20 17:29 ` [PATCH 6/8] ASoC: ep93xx: Use generic dmaengine PCM Lars-Peter Clausen
2013-05-06 19:41 ` Mark Brown
2013-04-20 17:29 ` [PATCH 7/8] ASoC: spear: Setup dma data in DAI probe Lars-Peter Clausen
2013-05-06 19:41 ` Mark Brown
2013-04-20 17:29 ` [PATCH 8/8] ASoC: spear: Use generic dmaengine PCM Lars-Peter Clausen
2013-05-06 19:41 ` Mark Brown
2013-04-21 7:14 ` [PATCH 1/8] ASoC: generic-dmaengine-pcm: Add support for half-duplex Shawn Guo
2013-04-22 10:28 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=519095CD.3080606@metafoo.de \
--to=lars@metafoo.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=hsweeten@visionengravers.com \
--cc=lgirdwood@gmail.com \
--cc=rajeev-dlh.kumar@st.com \
--cc=rmallon@gmail.com \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.