All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: Vadim Rozenfeld <vrozenfe@redhat.com>
Cc: kvm@vger.kernel.org, gleb@redhat.com, mtosatti@redhat.com, pl@dlh.net
Subject: Re: [RFC PATCH v2 1/2] add support for Hyper-V reference time counter
Date: Sun, 19 May 2013 16:37:07 +0200	[thread overview]
Message-ID: <5198E393.3050703@redhat.com> (raw)
In-Reply-To: <1368947197-9033-2-git-send-email-vrozenfe@redhat.com>

Il 19/05/2013 09:06, Vadim Rozenfeld ha scritto:
> Signed-off: Peter Lieven <pl@dlh.net>
> Signed-off: Gleb Natapov <gleb@redhat.com>
> Signed-off: Vadim Rozenfeld <vrozenfe@redhat.com>
> 
> v1 -> v2
> 1. mark TSC page dirty as suggested by 
>     Eric Northup <digitaleric@google.com> and Gleb
> 2. disable local irq when calling get_kernel_ns, 
>     as it was done by Peter Lieven <pl@dlhnet.de>
> 3. move check for TSC page enable from second patch
>     to this one.
>  
> ---
>  arch/x86/include/asm/kvm_host.h    |  2 ++
>  arch/x86/include/uapi/asm/hyperv.h | 14 ++++++++++++++
>  arch/x86/kvm/x86.c                 | 39 +++++++++++++++++++++++++++++++++++++-
>  include/uapi/linux/kvm.h           |  1 +
>  4 files changed, 55 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index 3741c65..f0fee35 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -575,6 +575,8 @@ struct kvm_arch {
>  	/* fields used by HYPER-V emulation */
>  	u64 hv_guest_os_id;
>  	u64 hv_hypercall;
> +	u64 hv_ref_count;
> +	u64 hv_tsc_page;
>  
>  	#ifdef CONFIG_KVM_MMU_AUDIT
>  	int audit_point;
> diff --git a/arch/x86/include/uapi/asm/hyperv.h b/arch/x86/include/uapi/asm/hyperv.h
> index b80420b..890dfc3 100644
> --- a/arch/x86/include/uapi/asm/hyperv.h
> +++ b/arch/x86/include/uapi/asm/hyperv.h
> @@ -136,6 +136,9 @@
>  /* MSR used to read the per-partition time reference counter */
>  #define HV_X64_MSR_TIME_REF_COUNT		0x40000020
>  
> +/* A partition's reference time stamp counter (TSC) page */
> +#define HV_X64_MSR_REFERENCE_TSC		0x40000021
> +
>  /* Define the virtual APIC registers */
>  #define HV_X64_MSR_EOI				0x40000070
>  #define HV_X64_MSR_ICR				0x40000071
> @@ -179,6 +182,9 @@
>  #define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_MASK	\
>  		(~((1ull << HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT) - 1))
>  
> +#define HV_X64_MSR_TSC_REFERENCE_ENABLE			0x00000001
> +#define HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT	12
> +
>  #define HV_PROCESSOR_POWER_STATE_C0		0
>  #define HV_PROCESSOR_POWER_STATE_C1		1
>  #define HV_PROCESSOR_POWER_STATE_C2		2
> @@ -191,4 +197,12 @@
>  #define HV_STATUS_INVALID_ALIGNMENT		4
>  #define HV_STATUS_INSUFFICIENT_BUFFERS		19
>  
> +typedef struct _HV_REFERENCE_TSC_PAGE {
> +	__u32 TscSequence;
> +	__u32 Rserved1;
> +	__u64 TscScale;
> +	__s64  TscOffset;
> +} HV_REFERENCE_TSC_PAGE, *PHV_REFERENCE_TSC_PAGE;
> +
> +
>  #endif
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 8d28810..9645dab 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -843,7 +843,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc);
>  static u32 msrs_to_save[] = {
>  	MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
>  	MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW,
> -	HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL,
> +	HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL, HV_X64_MSR_TIME_REF_COUNT,
>  	HV_X64_MSR_APIC_ASSIST_PAGE, MSR_KVM_ASYNC_PF_EN, MSR_KVM_STEAL_TIME,
>  	MSR_KVM_PV_EOI_EN,
>  	MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
> @@ -1788,6 +1788,8 @@ static bool kvm_hv_msr_partition_wide(u32 msr)
>  	switch (msr) {
>  	case HV_X64_MSR_GUEST_OS_ID:
>  	case HV_X64_MSR_HYPERCALL:
> +	case HV_X64_MSR_REFERENCE_TSC:
> +	case HV_X64_MSR_TIME_REF_COUNT:
>  		r = true;
>  		break;
>  	}
> @@ -1827,6 +1829,29 @@ static int set_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data)
>  		if (__copy_to_user((void __user *)addr, instructions, 4))
>  			return 1;
>  		kvm->arch.hv_hypercall = data;
> +		local_irq_disable();
> +		kvm->arch.hv_ref_count = get_kernel_ns();
> +		local_irq_enable();
> +		break;
> +	}
> +	case HV_X64_MSR_REFERENCE_TSC: {
> +		u64 gfn;
> +		unsigned long addr;
> +		HV_REFERENCE_TSC_PAGE tsc_ref;
> +		tsc_ref.TscSequence = 0;

Again, please explain why this is not 0xFFFFFFFF.

Paolo

> +		if (!(data & HV_X64_MSR_TSC_REFERENCE_ENABLE)) {
> +			kvm->arch.hv_tsc_page = data;
> +			break;
> +		}
> +		gfn = data >> HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT;
> +		addr = gfn_to_hva(kvm, data >>
> +				HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT);
> +		if (kvm_is_error_hva(addr))
> +			return 1;
> +		if (__copy_to_user((void __user *)addr, &tsc_ref, sizeof(tsc_ref)))
> +			return 1;
> +		mark_page_dirty(kvm, gfn);
> +		kvm->arch.hv_tsc_page = data;
>  		break;
>  	}
>  	default:
> @@ -2253,6 +2278,17 @@ static int get_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
>  	case HV_X64_MSR_HYPERCALL:
>  		data = kvm->arch.hv_hypercall;
>  		break;
> +	case HV_X64_MSR_TIME_REF_COUNT: {
> +		u64 now_ns;
> +		local_irq_disable();
> +		now_ns = get_kernel_ns() + kvm->arch.kvmclock_offset;
> +		data = div_u64(now_ns - kvm->arch.hv_ref_count, 100);
> +		local_irq_enable();
> +		break;
> +	}
> +	case HV_X64_MSR_REFERENCE_TSC:
> +		data = kvm->arch.hv_tsc_page;
> +		break;
>  	default:
>  		vcpu_unimpl(vcpu, "Hyper-V unhandled rdmsr: 0x%x\n", msr);
>  		return 1;
> @@ -2566,6 +2602,7 @@ int kvm_dev_ioctl_check_extension(long ext)
>  	case KVM_CAP_ASSIGN_DEV_IRQ:
>  	case KVM_CAP_PCI_2_3:
>  #endif
> +	case KVM_CAP_HYPERV_TIME:
>  		r = 1;
>  		break;
>  	case KVM_CAP_COALESCED_MMIO:
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index a5c86fc..0810763 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -666,6 +666,7 @@ struct kvm_ppc_smmu_info {
>  #define KVM_CAP_IRQ_MPIC 90
>  #define KVM_CAP_PPC_RTAS 91
>  #define KVM_CAP_IRQ_XICS 92
> +#define KVM_CAP_HYPERV_TIME 93
>  
>  #ifdef KVM_CAP_IRQ_ROUTING
>  
> 


  parent reply	other threads:[~2013-05-19 14:37 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-19  7:06 [RFC PATCH v2 0/2] Hyper-V timers Vadim Rozenfeld
2013-05-19  7:06 ` [RFC PATCH v2 1/2] add support for Hyper-V reference time counter Vadim Rozenfeld
2013-05-19 13:47   ` Gleb Natapov
2013-05-19 14:37   ` Paolo Bonzini [this message]
2013-05-22  0:46   ` Marcelo Tosatti
2013-05-22  3:28     ` Gleb Natapov
2013-05-22  3:32       ` Marcelo Tosatti
2013-05-22  3:38         ` Gleb Natapov
2013-05-22 14:31           ` Marcelo Tosatti
2013-05-22  7:32     ` Vadim Rozenfeld
2013-05-22 21:55       ` Paolo Bonzini
2013-05-23  6:17         ` Peter Lieven
2013-05-23  9:54           ` Paolo Bonzini
2013-05-23 10:45             ` Peter Lieven
2013-05-23 12:25           ` Vadim Rozenfeld
2013-05-23 13:18             ` Paolo Bonzini
2013-05-23 13:20               ` Peter Lieven
2013-05-23 13:23                 ` Paolo Bonzini
2013-05-23 13:30                   ` Peter Lieven
2013-05-23 13:40                     ` Paolo Bonzini
2013-05-19  7:06 ` [RFC PATCH v2 2/2] add support for Hyper-V invariant TSC Vadim Rozenfeld
2013-05-22  0:50   ` Marcelo Tosatti
2013-05-22  7:22     ` Vadim Rozenfeld
2013-05-22 21:23       ` Marcelo Tosatti
2013-05-23  6:18         ` Peter Lieven
2013-05-23  9:13           ` Gleb Natapov
2013-05-23 13:35             ` Marcelo Tosatti
2013-05-23 15:14               ` Gleb Natapov
2013-05-24  9:57               ` Vadim Rozenfeld
2013-05-23 12:33           ` Vadim Rozenfeld
2013-05-23 12:44             ` Peter Lieven
2013-05-23 12:45               ` Gleb Natapov
2013-05-23 12:54               ` Vadim Rozenfeld
2013-05-23  9:12         ` Gleb Natapov
2013-05-23 13:53           ` Marcelo Tosatti
2013-05-23 15:31             ` Gleb Natapov
2013-05-24 10:11               ` Vadim Rozenfeld
2013-05-24 19:41                 ` Marcelo Tosatti
2013-05-27 12:33                   ` Vadim Rozenfeld
2013-05-23 12:21         ` Vadim Rozenfeld
2013-05-23 13:47           ` Marcelo Tosatti
2013-05-24 10:01             ` Vadim Rozenfeld
2013-05-23 16:44   ` Paolo Bonzini
2013-05-24 10:16     ` Vadim Rozenfeld

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5198E393.3050703@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=gleb@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=mtosatti@redhat.com \
    --cc=pl@dlh.net \
    --cc=vrozenfe@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.