Sorry - did not realize the typo in my message.

The file I grabbed (core-image-minimal-dev-routerstationpro.tar.bz2) was from yocto.  I copied the URL from Chrome and did not realize it pointed to a local URL.  Same for the sato image.  It was from Yocto and not local.  The latter one was the one that worked

Jerry

On 22/05/13 10:03 , Precipice Development wrote:
Some progress.  Thanks for your help.  My notes are below.  I found a path to get it working but not as per documentation

I did use my own rootfs image.  In the adt_installer.conf file I had the following:

YOCTOADT_ROOTFS_mips="minimal-dev sato-sdk"
YOCTOADT_TARGET_SYSROOT_IMAGE_mips="minimal-dev"
YOCTOADT_TARGET_SYSROOT_LOC_mips="$HOME/adt/sysroots/mips"

In my eclipse preferences for ADT, I have sysroot pointed to the 

I also grabbed file:///home/jph/downloads/core-image-minimal-dev-routerstationpro.tar.bz2 and did a runqemu-extract-sdk as a test. Pointed my sysroots to the extracted folder.  I get the same error in Eclipse.  I went ahead and grabbed the sato image for RSPro and repeated.  Reconfigure projects worked and gave me an info message only:

Missing PROG mips-poky-linux-dlltool
Missing PROG dlltool hw3
Missing PROG mips-poky-linux-mt

From this image the build worked.  Not sure why I am getting those errors with the dev image however (both mine and the downloaded one).



On Tue, May 21, 2013 at 10:40 PM, Rudolf Streif <rstreif@linuxfoundation.org> wrote:
What root file system are you using with your Eclipse ADT setup? If you are using one of the default ones that you can specify in adt_installer.conf or your own?

In any case it looks as if your root file system image is not suitable for development work. You would need to use image targets that end in *-dev or *-sdk such as core-image-minimal-dev.

Rudi



--
Precipice Development International
http://www.precipicedevelopment.com