From: Mario Limonciello <mario.limonciello@amd.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
"Rafael J . Wysocki" <rjw@rjwysocki.net>,
linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] x86/pci: Stop requiring MMCONFIG to be declared in E820, ACPI or EFI for newer systems
Date: Tue, 5 Dec 2023 11:00:31 -0600 [thread overview]
Message-ID: <519ebaea-60ae-413f-8746-0f75574b8cb9@amd.com> (raw)
In-Reply-To: <20231205161713.GA674824@bhelgaas>
On 12/5/2023 10:17, Bjorn Helgaas wrote:
> On Tue, Dec 05, 2023 at 09:48:45AM -0600, Mario Limonciello wrote:
>> commit 7752d5cfe3d1 ("x86: validate against acpi motherboard resources")
>> introduced checks for ensuring that MCFG table also has memory region
>> reservations to ensure no conflicts were introduced from a buggy BIOS.
>>
>> This has proceeded over time to add other types of reservation checks
>> for ACPI PNP resources and EFI MMIO memory type. The PCI firmware spec
>> however says that these checks are only required when the operating system
>> doesn't comprehend the firmware region:
>>
>> ```
>> If the operating system does not natively comprehend reserving the MMCFG
>> region, the MMCFG region must be reserved by firmware. The address range
>> reported in the MCFG table or by _CBA method (see Section 4.1.3) must be
>> reserved by declaring a motherboard resource. For most systems, the
>> motherboard resource would appear at the root of the ACPI namespace
>> (under \_SB) in a node with a _HID of EISAID (PNP0C02), and the resources
>> in this case should not be claimed in the root PCI bus’s _CRS. The
>> resources can optionally be returned in Int15 E820h or EFIGetMemoryMap
>> as reserved memory but must always be reported through ACPI as a
>> motherboard resource.
>> ```
>
> My understanding is that native comprehension would mean Linux knows
> how to discover and/or configure the MMCFG base address and size in
> the hardware and that Linux would then reserve that region so it's not
> used for anything else.
>
> Linux doesn't have that, at least for x86. It relies on the MCFG
> table to discover the MMCFG region, and it relies on PNP0C02 _CRS to
> reserve it.
MCFG to discover it matches the PCI firmware spec, but as I point out
above the decision to reserve this region doesn't require
PNP0C01/PNP0C02 _CRS.
This is a decision made by Linux historically.
>
>> Running this check causes problems with accessing extended PCI
>> configuration space on OEM laptops that don't specify the region in PNP
>> resources or in the EFI memory map. That later manifests as problems with
>> dGPU and accessing resizable BAR.
>
> Is there a problem report we can reference here?
Nothing public to share. AMD BIOS team is in discussion with the OEM to
add the reservation in a BIOS upgrade so it works with things like the
LTS kernels.
Knowing Windows works without it I feel this is still something that we
should be looking at fixing from an upstream perspective though which is
what prompted my patch and discussion.
>
> Does the problem still occur with this series?
> https://lore.kernel.org/r/20231121183643.249006-1-helgaas@kernel.org
>
> This appeared in linux-next 20231130.
Thanks for sharing that. If I do respin a variation of this patch I'll
rebase on top of that.
I had a try with that series on top of 6.7-rc4, but it doesn't fix the
issue (but obviously the patch I sent does).
# journalctl -k | grep ECAM
Dec 05 06:37:46 cl-fw-fedora kernel: PCI: ECAM [mem
0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
Dec 05 06:37:46 cl-fw-fedora kernel: PCI: not using ECAM ([mem
0xe0000000-0xefffffff] not reserved)
Dec 05 06:37:46 cl-fw-fedora kernel: PCI: ECAM [mem
0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
Dec 05 06:37:46 cl-fw-fedora kernel: PCI: [Firmware Info]: ECAM [mem
0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
Dec 05 06:37:46 cl-fw-fedora kernel: PCI: not using ECAM ([mem
0xe0000000-0xefffffff] not reserved)
>
>> Similar problems don't exist in Windows 11 with exact same
>> laptop/firmware stack, and in discussion with AMD's BIOS team
>> Windows doesn't have similar checks.
>
> I would love to know AMD BIOS team's take on this. Does the BIOS
> reserve the MMCFG space in any way?
On the AMD reference platform this OEM system is based on it is reserved
in the EFI memory map. So on a 6.7 based kernel the reference system
you can see this emitted:
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as EfiMemoryMappedIO
But on the OEM system this is not reserved by EFI memory map or _CRS.
That's why my assumption after reading the firmware spec and seeing the
behavior is that Windows makes the reservation *based on* what's in MCFG.
>
>> As this series of checks was first introduced as a mitigation for buggy
>> BIOS before EFI was introduced add a BIOS date range to only enforce the
>> checks on hardware that predates the release of Windows 11.
>
> Many of the MMCFG checks in Linux are historical artifacts that are
> likely related to Linux defects, not BIOS defects, so I wouldn't
> expect to see them in Windows. But it's hard to remove them now.
I guess I was hoping that by cutting a line in the sand we could avoid
breaking anything that was relying upon the older behavior.
>
>> Link: https://members.pcisig.com/wg/PCI-SIG/document/15350
>> PCI Firmware Specification 3.3
>> Section 4.1.2 MCFG Table Description Note 2
>> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
>> ---
>> arch/x86/pci/mmconfig-shared.c | 10 +++++++---
>> 1 file changed, 7 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
>> index 4b3efaa82ab7..e4594b181ebf 100644
>> --- a/arch/x86/pci/mmconfig-shared.c
>> +++ b/arch/x86/pci/mmconfig-shared.c
>> @@ -570,9 +570,13 @@ static void __init pci_mmcfg_reject_broken(int early)
>>
>> list_for_each_entry(cfg, &pci_mmcfg_list, list) {
>> if (pci_mmcfg_check_reserved(NULL, cfg, early) == 0) {
>> - pr_info(PREFIX "not using MMCONFIG\n");
>> - free_all_mmcfg();
>> - return;
>> + if (dmi_get_bios_year() >= 2021) {
>> + pr_info(PREFIX "MMCONFIG wasn't reserved by ACPI or EFI\n");
>
> I think this leads to using the MMCONFIG area without reserving it
> anywhere, so we may end up assigning that space to something else,
> which won't work, i.e., the problem described here:
> https://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git/commit/?id=5cef3014e02d
>
>> + } else {
>> + pr_info(PREFIX "not using MMCONFIG\n");
>> + free_all_mmcfg();
>> + return;
>> + }
>> }
>> }
>> }
>> --
>> 2.34.1
>>
next prev parent reply other threads:[~2023-12-05 17:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-05 15:48 [PATCH] x86/pci: Stop requiring MMCONFIG to be declared in E820, ACPI or EFI for newer systems Mario Limonciello
2023-12-05 16:17 ` Bjorn Helgaas
2023-12-05 17:00 ` Mario Limonciello [this message]
2023-12-05 17:31 ` Bjorn Helgaas
2023-12-05 18:28 ` Mario Limonciello
2023-12-05 22:17 ` Mario Limonciello
2023-12-14 20:43 ` Bjorn Helgaas
2023-12-14 21:45 ` Mario Limonciello
2023-12-14 23:30 ` Bjorn Helgaas
2023-12-15 15:48 ` Mario Limonciello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=519ebaea-60ae-413f-8746-0f75574b8cb9@amd.com \
--to=mario.limonciello@amd.com \
--cc=bhelgaas@google.com \
--cc=helgaas@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rjw@rjwysocki.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.