diff for duplicates of <51A445F5.4050206@freescale.com> diff --git a/a/1.txt b/N1/1.txt index 5df6166..d0dbd90 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,4 +1,4 @@ -? 2013?05?25? 01:51, Chaiken, Alison ??: +于 2013年05月25日 01:51, Chaiken, Alison 写道: > n your patch, the address lines are set to 0xb0b1, which is correct, as hysteresis is disabled and SRE is fast for those lines. However, for data lines, hysteresis is enabled and SRE is slow, so the 0x1b0b0 setting is more appropriate. 0xb0b1 is the legacy value from the BSP code. But i agree that 0x1b0b0 is better. @@ -6,3 +6,10 @@ I will use it in next version. thanks Huang Shijie + + + +_______________________________________________ +devicetree-discuss mailing list +devicetree-discuss@lists.ozlabs.org +https://lists.ozlabs.org/listinfo/devicetree-discuss diff --git a/a/content_digest b/N1/content_digest index 8db53d3..ba2d724 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,19 +1,34 @@ "ref\01369389564-13181-1-git-send-email-b32955@freescale.com\0" "ref\01369389564-13181-6-git-send-email-b32955@freescale.com\0" "ref\060BA5429A0E1584BA3633194F6F993B5025754D1@NA-MBX-03.mgc.mentorg.com\0" - "From\0b32955@freescale.com (Huang Shijie)\0" - "Subject\0[PATCH v3 5/6] ARM: dts: imx6dl: add pinctrls for WEIM NOR\0" + "ref\060BA5429A0E1584BA3633194F6F993B5025754D1-0dz9ie/QGrnnlEkxMdpx1dQH9K4/4qFeAL8bYrjMMd8@public.gmane.org\0" + "From\0Huang Shijie <b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>\0" + "Subject\0Re: [PATCH v3 5/6] ARM: dts: imx6dl: add pinctrls for WEIM NOR\0" "Date\0Tue, 28 May 2013 13:51:49 +0800\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Chaiken" + " Alison <Alison_Chaiken-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>\0" + "Cc\0shc_work-JGs/UdohzUI@public.gmane.org <shc_work-JGs/UdohzUI@public.gmane.org>" + s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> + rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> + grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> + devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org <devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org> + " linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>\0" "\00:1\0" "b\0" - "? 2013?05?25? 01:51, Chaiken, Alison ??:\n" + "\344\272\216 2013\345\271\26405\346\234\21025\346\227\245 01:51, Chaiken, Alison \345\206\231\351\201\223:\n" "> n your patch, the address lines are set to 0xb0b1, which is correct, as hysteresis is disabled and SRE is fast for those lines. However, for data lines, hysteresis is enabled and SRE is slow, so the 0x1b0b0 setting is more appropriate.\n" "0xb0b1 is the legacy value from the BSP code. But i agree that 0x1b0b0 \n" "is better.\n" "I will use it in next version.\n" "\n" "thanks\n" - Huang Shijie + "Huang Shijie\n" + "\n" + "\n" + "\n" + "_______________________________________________\n" + "devicetree-discuss mailing list\n" + "devicetree-discuss@lists.ozlabs.org\n" + https://lists.ozlabs.org/listinfo/devicetree-discuss -d146aae36ab6855fd5e506456f8c8c27da34644207c5241bee1e9fdcf1a60159 +e965f00df7a8a9c9cb041e823902d3bf8c2c0a90eec79f79e5caf73cebc0f4ef
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.