From: Jelle de Jong <jelledejong@powercraft.nl>
To: Wilco Baan Hofman <wilco@baanhofman.nl>
Cc: bridge@lists.linux-foundation.org
Subject: Re: [Bridge] bond-mode 4 bridge-utils 3.x kernel not fully working
Date: Wed, 29 May 2013 09:54:05 +0200 [thread overview]
Message-ID: <51A5B41D.4040709@powercraft.nl> (raw)
In-Reply-To: <1369812543.6697.3.camel@localhost>
Hi Wilco,
On 29/05/13 09:29, Wilco Baan Hofman wrote:
>> Traffic comes out the KVM quests but doesn?t come in. If I disable
>> bonding everything just works again.
>>
>> auto bond0
>> iface bond0 inet manual
>> slaves eth0 eth1
>> bond-mode 4
>> bond-miimon 100
>> pre-up /sbin/ifconfig bond0 mtu 9000
>
>> auto eth0
>> iface eth0 inet manual
>> mtu 900
>
> Does this one really say mtu 900 instead of 9000?
> Is your eth1 up?
No, it was mtu 9000 (sorry for the confusion)
> Did you try non-kvm traffic over the bonding interface?
> Is the switch in LACP mode?
Yes the Cisco switch is in LACP mode and I use intel nics.
http://paste.debian.net/6686/
I noticed that incoming IPv6 traffic doesn't work anymore, the br0
interface recieved the IPv6 IP and I can ping it on the local-host but
not from an other server, the IPv6 works again to moment I remove the
bonding.
Remember tcpdump does show traffic coming in and out the br0 device but
not the vnet0 device that is used for the kvm guest.
Kind regards,
Jelle de Jong
next prev parent reply other threads:[~2013-05-29 7:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-28 23:10 [Bridge] bond-mode 4 bridge-utils 3.x kernel not fully working Jelle de Jong
2013-05-29 7:29 ` Wilco Baan Hofman
2013-05-29 7:54 ` Jelle de Jong [this message]
2013-06-17 11:00 ` Jelle de Jong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51A5B41D.4040709@powercraft.nl \
--to=jelledejong@powercraft.nl \
--cc=bridge@lists.linux-foundation.org \
--cc=wilco@baanhofman.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.