* Trouble installing fsl codec libraries @ 2013-05-30 11:36 Daniel Kenji Morgan 2013-05-30 19:54 ` Sandoval Gonzalez Leonardo-B42214 0 siblings, 1 reply; 7+ messages in thread From: Daniel Kenji Morgan @ 2013-05-30 11:36 UTC (permalink / raw) To: meta-freescale Hello, I'm trying to play audio files using gstreamer on the SABRE Lite board. I've tried building an image by inheriting "core-image" and adding "gstreamer" and "gst-fsl-plugin" to CORE_IMAGE_EXTRA_INSTALL. For some reason, none of the codecs included in "libfslcodec" are installed onto my image even though they are built. The parsers in libfslparser are installed without any problems. I've tried messing about with various recipes, but have had no success so far in getting the codecs to be installed. Can anyone give me some insight into what I might be doing wrong? I am currently using Poky 1.3 (danny) for all required meta layers. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Trouble installing fsl codec libraries 2013-05-30 11:36 Trouble installing fsl codec libraries Daniel Kenji Morgan @ 2013-05-30 19:54 ` Sandoval Gonzalez Leonardo-B42214 2013-05-31 9:52 ` Daniel Kenji Morgan 0 siblings, 1 reply; 7+ messages in thread From: Sandoval Gonzalez Leonardo-B42214 @ 2013-05-30 19:54 UTC (permalink / raw) To: daniel.kenji.morgan@gmail.com, meta-freescale@yoctoproject.org have you tried building a 'fsl-image-gui' image? that image contains freescale's gstreamer plugins. Leo ________________________________________ From: meta-freescale-bounces@yoctoproject.org [meta-freescale-bounces@yoctoproject.org] on behalf of Daniel Kenji Morgan [daniel.kenji.morgan@gmail.com] Sent: Thursday, May 30, 2013 6:36 AM To: meta-freescale@yoctoproject.org Subject: [meta-freescale] Trouble installing fsl codec libraries Hello, I'm trying to play audio files using gstreamer on the SABRE Lite board. I've tried building an image by inheriting "core-image" and adding "gstreamer" and "gst-fsl-plugin" to CORE_IMAGE_EXTRA_INSTALL. For some reason, none of the codecs included in "libfslcodec" are installed onto my image even though they are built. The parsers in libfslparser are installed without any problems. I've tried messing about with various recipes, but have had no success so far in getting the codecs to be installed. Can anyone give me some insight into what I might be doing wrong? I am currently using Poky 1.3 (danny) for all required meta layers. _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Trouble installing fsl codec libraries 2013-05-30 19:54 ` Sandoval Gonzalez Leonardo-B42214 @ 2013-05-31 9:52 ` Daniel Kenji Morgan 2013-05-31 11:13 ` Philip Craig 0 siblings, 1 reply; 7+ messages in thread From: Daniel Kenji Morgan @ 2013-05-31 9:52 UTC (permalink / raw) To: meta-freescale@yoctoproject.org (2013/05/31 4:54), Sandoval Gonzalez Leonardo-B42214 wrote: > have you tried building a 'fsl-image-gui' image? that image contains freescale's gstreamer plugins. > > Leo > ________________________________________ > From: meta-freescale-bounces@yoctoproject.org [meta-freescale-bounces@yoctoproject.org] on behalf of Daniel Kenji Morgan [daniel.kenji.morgan@gmail.com] > Sent: Thursday, May 30, 2013 6:36 AM > To: meta-freescale@yoctoproject.org > Subject: [meta-freescale] Trouble installing fsl codec libraries > > Hello, > > I'm trying to play audio files using gstreamer on the SABRE Lite board. > I've tried building an image by inheriting "core-image" and adding "gstreamer" and "gst-fsl-plugin" to CORE_IMAGE_EXTRA_INSTALL. > For some reason, none of the codecs included in "libfslcodec" are installed onto my image even though they are built. > The parsers in libfslparser are installed without any problems. > I've tried messing about with various recipes, but have had no success so far in getting the codecs to be installed. > > Can anyone give me some insight into what I might be doing wrong? > I am currently using Poky 1.3 (danny) for all required meta layers. > > _______________________________________________ > meta-freescale mailing list > meta-freescale@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-freescale > > Thank you for the reply. Here is an update. It turns out the codecs are installed, but the codec *wrapper* libraries are NOT. I tried building both "fsl-image-gui" and "fsl-image-test", but the results are the same. I did a comparison against an image built using LTIB, and it turns out that "/usr/lib/imx-mm/audio-codec/wrap" contains the wrapper libraries. The yocto images does not contain this directory nor any of the wrapper libraries. Forgive me if my assumption is wrong, but don't the following lines in "do_install_append" from libfslcodec_3.0.1.bb delete the wrapper libraries? # LTIB move the files around or gst-fsl-plugin won't find them for p in $(find ${D}${libdir}/imx-mm -mindepth 1 -maxdepth 1 -type d); do mv $p/* ${D}${libdir} rmdir $p done rmdir ${D}${libdir}/imx-mm The packaging in "populate_packages_prepend" also seems to place the wrapper libraries into "/usr/lib/wrap" which does not match the path found in the LTIB generated image. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Trouble installing fsl codec libraries 2013-05-31 9:52 ` Daniel Kenji Morgan @ 2013-05-31 11:13 ` Philip Craig 2013-05-31 12:43 ` Otavio Salvador 0 siblings, 1 reply; 7+ messages in thread From: Philip Craig @ 2013-05-31 11:13 UTC (permalink / raw) To: daniel.kenji.morgan; +Cc: meta-freescale@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 1567 bytes --] On Fri, May 31, 2013 at 7:52 PM, Daniel Kenji Morgan <daniel.kenji.morgan@gmail.com> wrote: > Thank you for the reply. > Here is an update. > > It turns out the codecs are installed, but the codec *wrapper* libraries are NOT. > I tried building both "fsl-image-gui" and "fsl-image-test", but the results are the same. > > I did a comparison against an image built using LTIB, and it turns out that "/usr/lib/imx-mm/audio-codec/wrap" contains the wrapper libraries. > The yocto images does not contain this directory nor any of the wrapper libraries. > > Forgive me if my assumption is wrong, but don't the following lines in "do_install_append" from libfslcodec_3.0.1.bb delete the wrapper libraries? > > # LTIB move the files around or gst-fsl-plugin won't find them > for p in $(find ${D}${libdir}/imx-mm -mindepth 1 -maxdepth 1 -type d); do > mv $p/* ${D}${libdir} > rmdir $p > done > rmdir ${D}${libdir}/imx-mm > > The packaging in "populate_packages_prepend" also seems to place the wrapper libraries into "/usr/lib/wrap" which does not match the path found in the LTIB generated image. I also had noticed this was broken, but hadn't gotten around to figuring out why yet. It sounds like you are on the right track though. The paths it needs are defined in /usr/share/beep_registry.*.cf, which are the same "/usr/lib/imx-mm/audio-codec/wrap" as the LTIB image. I think the recipe needs to be changed to not move the wrap directory to /usr/lib. (It does need to move the rest of the libraries still though.) Try this patch. [-- Attachment #2: patch --] [-- Type: application/octet-stream, Size: 2604 bytes --] diff --git a/recipes-multimedia/gst-plugins/gst-fsl-plugin.inc b/recipes-multimedia/gst-plugins/gst-fsl-plugin.inc index 66d29c4..a815d29 100644 --- a/recipes-multimedia/gst-plugins/gst-fsl-plugin.inc +++ b/recipes-multimedia/gst-plugins/gst-fsl-plugin.inc @@ -46,4 +46,6 @@ FILES_${PN}-libgstbufmeta = "${libdir}/libgstbufmeta${SOLIBS}" FILES_${PN}-libmfwba = "${libdir}/libmfwba${SOLIBS}" FILES_${PN}-libfwvss = "${libdir}/libmfwvss${SOLIBS}" +RDEPENDS_${PN} = "libfslcodec-audio-wrap" + PACKAGE_ARCH = "${MACHINE_ARCH}" diff --git a/recipes-multimedia/libfslcodec/libfslcodec.inc b/recipes-multimedia/libfslcodec/libfslcodec.inc index 8b01887..a2dfeb6 100644 --- a/recipes-multimedia/libfslcodec/libfslcodec.inc +++ b/recipes-multimedia/libfslcodec/libfslcodec.inc @@ -11,6 +11,7 @@ inherit fsl-eula-unpack autotools pkgconfig SRC_URI = "${FSL_MIRROR}/${PN}-${PV}.bin;fsl-eula=true" +PACKAGES += "${PN}-audio-wrap" PACKAGES_DYNAMIC = "${PN}-*" INHIBIT_PACKAGE_DEBUG_SPLIT = "1" @@ -19,11 +20,7 @@ do_install_append() { rm ${D}${libdir}/imx-mm/audio-codec/lib_src_ppp_arm11_elinux.so # LTIB move the files around or gst-fsl-plugin won't find them - for p in $(find ${D}${libdir}/imx-mm -mindepth 1 -maxdepth 1 -type d); do - mv $p/* ${D}${libdir} - rmdir $p - done - rmdir ${D}${libdir}/imx-mm + mv ${D}${libdir}/imx-mm/*/*${SOLIBS} ${D}${libdir} # FIXME: Drop examples rm -r ${D}${datadir}/imx-mm @@ -36,17 +33,12 @@ python populate_packages_prepend() { description='Freescale IMX Codec (%s)', extra_depends='', prepend=True) - wrapdir = bb.data.expand('${libdir}/wrap', d) - do_split_packages(d, wrapdir, '^lib_(.*)_elinux\.so\..*', - aux_files_pattern_verbatim='${libdir}/wrap/lib_%s_elinux.so.*', - output_pattern='libfslcodec-audio-wrap-%s', - description='Freescale IMX Codec Wrap (%s)', - extra_depends='', prepend=True) - # FIXME: All binaries lack GNU_HASH in elf binary but as we don't have # the source we cannot fix it. Disable the insane check for now. for p in d.getVar('PACKAGES', True).split(): d.setVar("INSANE_SKIP_%s" % p, "ldflags textrel") + + d.setVar("INSANE_SKIP_libfslcodec-audio-wrap", "dev-so") } # Ensure we get warnings if we miss something @@ -55,4 +47,6 @@ FILES_${PN} = "" FILES_${PN}-dev += "${libdir}/*/*${SOLIBSDEV} \ ${libdir}/*/*/*${SOLIBSDEV}" +FILES_${PN}-audio-wrap = "${libdir}/imx-mm/audio-codec/wrap" + PACKAGE_ARCH = "${MACHINE_ARCH}" ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: Trouble installing fsl codec libraries 2013-05-31 11:13 ` Philip Craig @ 2013-05-31 12:43 ` Otavio Salvador 2013-06-06 12:12 ` Daniel Kenji Morgan 0 siblings, 1 reply; 7+ messages in thread From: Otavio Salvador @ 2013-05-31 12:43 UTC (permalink / raw) To: Philip Craig; +Cc: meta-freescale@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 2114 bytes --] On Fri, May 31, 2013 at 8:13 AM, Philip Craig <phil@blackmoth.com.au> wrote: > On Fri, May 31, 2013 at 7:52 PM, Daniel Kenji Morgan > <daniel.kenji.morgan@gmail.com> wrote: > > Thank you for the reply. > > Here is an update. > > > > It turns out the codecs are installed, but the codec *wrapper* libraries > are NOT. > > I tried building both "fsl-image-gui" and "fsl-image-test", but the > results are the same. > > > > I did a comparison against an image built using LTIB, and it turns out > that "/usr/lib/imx-mm/audio-codec/wrap" contains the wrapper libraries. > > The yocto images does not contain this directory nor any of the wrapper > libraries. > > > > Forgive me if my assumption is wrong, but don't the following lines in > "do_install_append" from libfslcodec_3.0.1.bb delete the wrapper > libraries? > > > > # LTIB move the files around or gst-fsl-plugin won't find them > > for p in $(find ${D}${libdir}/imx-mm -mindepth 1 -maxdepth 1 -type d); do > > mv $p/* ${D}${libdir} > > rmdir $p > > done > > rmdir ${D}${libdir}/imx-mm > > > > The packaging in "populate_packages_prepend" also seems to place the > wrapper libraries into "/usr/lib/wrap" which does not match the path found > in the LTIB generated image. > > I also had noticed this was broken, but hadn't gotten around to > figuring out why yet. It sounds like you are on the right track > though. The paths it needs are defined in > /usr/share/beep_registry.*.cf, which are the same > "/usr/lib/imx-mm/audio-codec/wrap" as the LTIB image. I think the > recipe needs to be changed to not move the wrap directory to /usr/lib. > (It does need to move the rest of the libraries still though.) Try > this patch. > Yes; it was broken. We pushed many fixes for this in master yesterday so you could give it a try. We may try to backport the fixes for danny and dylan once this is tested. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://projetos.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 [-- Attachment #2: Type: text/html, Size: 2972 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Trouble installing fsl codec libraries 2013-05-31 12:43 ` Otavio Salvador @ 2013-06-06 12:12 ` Daniel Kenji Morgan 2013-06-06 12:18 ` Otavio Salvador 0 siblings, 1 reply; 7+ messages in thread From: Daniel Kenji Morgan @ 2013-06-06 12:12 UTC (permalink / raw) To: Otavio Salvador; +Cc: meta-freescale@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 2735 bytes --] (2013/05/31 21:43), Otavio Salvador wrote: > > > > On Fri, May 31, 2013 at 8:13 AM, Philip Craig <phil@blackmoth.com.au > <mailto:phil@blackmoth.com.au>> wrote: > > On Fri, May 31, 2013 at 7:52 PM, Daniel Kenji Morgan > <daniel.kenji.morgan@gmail.com > <mailto:daniel.kenji.morgan@gmail.com>> wrote: > > Thank you for the reply. > > Here is an update. > > > > It turns out the codecs are installed, but the codec *wrapper* > libraries are NOT. > > I tried building both "fsl-image-gui" and "fsl-image-test", but > the results are the same. > > > > I did a comparison against an image built using LTIB, and it > turns out that "/usr/lib/imx-mm/audio-codec/wrap" contains the > wrapper libraries. > > The yocto images does not contain this directory nor any of the > wrapper libraries. > > > > Forgive me if my assumption is wrong, but don't the following > lines in "do_install_append" from libfslcodec_3.0.1.bb > <http://libfslcodec_3.0.1.bb> delete the wrapper libraries? > > > > # LTIB move the files around or gst-fsl-plugin won't find them > > for p in $(find ${D}${libdir}/imx-mm -mindepth 1 -maxdepth 1 > -type d); do > > mv $p/* ${D}${libdir} > > rmdir $p > > done > > rmdir ${D}${libdir}/imx-mm > > > > The packaging in "populate_packages_prepend" also seems to place > the wrapper libraries into "/usr/lib/wrap" which does not match > the path found in the LTIB generated image. > > I also had noticed this was broken, but hadn't gotten around to > figuring out why yet. It sounds like you are on the right track > though. The paths it needs are defined in > /usr/share/beep_registry.*.cf, which are the same > "/usr/lib/imx-mm/audio-codec/wrap" as the LTIB image. I think the > recipe needs to be changed to not move the wrap directory to /usr/lib. > (It does need to move the rest of the libraries still though.) Try > this patch. > > > Yes; it was broken. > > We pushed many fixes for this in master yesterday so you could give it > a try. > > We may try to backport the fixes for danny and dylan once this is tested. > -- > Otavio Salvador O.S. Systems > http://www.ossystems.com.br http://projetos.ossystems.com.br > Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 I tried out the recipe in master, and indeed, the libraries are all correctly installed. The following lines fail the build using "danny" though: codec_pkgs = oe.utils.packages_filter_out_system(d) d.appendVar('RDEPENDS_libfslcodec-meta', ' ' + ' '.join(codec_pkgs)) [-- Attachment #2: Type: text/html, Size: 5311 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Trouble installing fsl codec libraries 2013-06-06 12:12 ` Daniel Kenji Morgan @ 2013-06-06 12:18 ` Otavio Salvador 0 siblings, 0 replies; 7+ messages in thread From: Otavio Salvador @ 2013-06-06 12:18 UTC (permalink / raw) To: daniel.kenji.morgan; +Cc: meta-freescale@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 2953 bytes --] On Thu, Jun 6, 2013 at 9:12 AM, Daniel Kenji Morgan < daniel.kenji.morgan@gmail.com> wrote: > > (2013/05/31 21:43), Otavio Salvador wrote: > > > > > On Fri, May 31, 2013 at 8:13 AM, Philip Craig <phil@blackmoth.com.au>wrote: > >> On Fri, May 31, 2013 at 7:52 PM, Daniel Kenji Morgan >> <daniel.kenji.morgan@gmail.com> wrote: >> > Thank you for the reply. >> > Here is an update. >> > >> > It turns out the codecs are installed, but the codec *wrapper* >> libraries are NOT. >> > I tried building both "fsl-image-gui" and "fsl-image-test", but the >> results are the same. >> > >> > I did a comparison against an image built using LTIB, and it turns out >> that "/usr/lib/imx-mm/audio-codec/wrap" contains the wrapper libraries. >> > The yocto images does not contain this directory nor any of the wrapper >> libraries. >> > >> > Forgive me if my assumption is wrong, but don't the following lines in >> "do_install_append" from libfslcodec_3.0.1.bb delete the wrapper >> libraries? >> > >> > # LTIB move the files around or gst-fsl-plugin won't find them >> > for p in $(find ${D}${libdir}/imx-mm -mindepth 1 -maxdepth 1 -type d); >> do >> > mv $p/* ${D}${libdir} >> > rmdir $p >> > done >> > rmdir ${D}${libdir}/imx-mm >> > >> > The packaging in "populate_packages_prepend" also seems to place the >> wrapper libraries into "/usr/lib/wrap" which does not match the path found >> in the LTIB generated image. >> >> I also had noticed this was broken, but hadn't gotten around to >> figuring out why yet. It sounds like you are on the right track >> though. The paths it needs are defined in >> /usr/share/beep_registry.*.cf, which are the same >> "/usr/lib/imx-mm/audio-codec/wrap" as the LTIB image. I think the >> recipe needs to be changed to not move the wrap directory to /usr/lib. >> (It does need to move the rest of the libraries still though.) Try >> this patch. >> > > Yes; it was broken. > > We pushed many fixes for this in master yesterday so you could give it a > try. > > We may try to backport the fixes for danny and dylan once this is tested. > > -- > Otavio Salvador O.S. Systems > http://www.ossystems.com.br http://projetos.ossystems.com.br > Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 > > > I tried out the recipe in master, and indeed, the libraries are all > correctly installed. > The following lines fail the build using "danny" though: > > codec_pkgs = oe.utils.packages_filter_out_system(d) > d.appendVar('RDEPENDS_libfslcodec-meta', ' ' + ' '.join(codec_pkgs)) > Yes; this is indeed a new method added in dylan. Maybe you could prepare patches for porting the packaging fixes? -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://projetos.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 [-- Attachment #2: Type: text/html, Size: 5782 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-06-06 12:18 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-05-30 11:36 Trouble installing fsl codec libraries Daniel Kenji Morgan 2013-05-30 19:54 ` Sandoval Gonzalez Leonardo-B42214 2013-05-31 9:52 ` Daniel Kenji Morgan 2013-05-31 11:13 ` Philip Craig 2013-05-31 12:43 ` Otavio Salvador 2013-06-06 12:12 ` Daniel Kenji Morgan 2013-06-06 12:18 ` Otavio Salvador
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.