Re: [PATCH] iio: replace strict_strtoul() with kstrtoul()

[Jonathan Cameron <jic23@kernel.org>]

On 06/01/2013 08:10 AM, Jingoo Han wrote:
> The usage of strict_strtoul() is not preferred, because
> strict_strtoul() is obsolete. Thus, kstrtoul() should be
> used.
> 
hmmm.  Normally I'd only take this sort of change
if it were part of a large scale cleanup of a driver, but
as those are both my drivers what the heck, I'll take it.

Applied to the togreg branch of iio.git.

> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
>  drivers/iio/adc/max1363.c            |    2 +-
>  drivers/iio/trigger/iio-trig-sysfs.c |    4 ++--
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
> index 9e6da72..f148d00 100644
> --- a/drivers/iio/adc/max1363.c
> +++ b/drivers/iio/adc/max1363.c
> @@ -660,7 +660,7 @@ static ssize_t max1363_monitor_store_freq(struct device *dev,
>  	unsigned long val;
>  	bool found = false;
>  
> -	ret = strict_strtoul(buf, 10, &val);
> +	ret = kstrtoul(buf, 10, &val);
>  	if (ret)
>  		return -EINVAL;
>  	for (i = 0; i < ARRAY_SIZE(max1363_monitor_speeds); i++)
> diff --git a/drivers/iio/trigger/iio-trig-sysfs.c b/drivers/iio/trigger/iio-trig-sysfs.c
> index b727bde..effcd0a 100644
> --- a/drivers/iio/trigger/iio-trig-sysfs.c
> +++ b/drivers/iio/trigger/iio-trig-sysfs.c
> @@ -34,7 +34,7 @@ static ssize_t iio_sysfs_trig_add(struct device *dev,
>  	int ret;
>  	unsigned long input;
>  
> -	ret = strict_strtoul(buf, 10, &input);
> +	ret = kstrtoul(buf, 10, &input);
>  	if (ret)
>  		return ret;
>  	ret = iio_sysfs_trigger_probe(input);
> @@ -53,7 +53,7 @@ static ssize_t iio_sysfs_trig_remove(struct device *dev,
>  	int ret;
>  	unsigned long input;
>  
> -	ret = strict_strtoul(buf, 10, &input);
> +	ret = kstrtoul(buf, 10, &input);
>  	if (ret)
>  		return ret;
>  	ret = iio_sysfs_trigger_remove(input);
>