Re: All models of Technotrend TT-connect CT-3650 are not supported

[Jussi Jaaskelainen <www.linuxtv.org@jjussi.com>]

On 3.6.2013 0.28, Antti Palosaari wrote:
> On 05/31/2013 08:53 AM, Jussi Jääskeläinen wrote:
>> Jussi Jääskeläinen <www.linuxtv.org <at> jjussi.com> writes:
>>
>>> Older models have: idVendor=0b48, idProduct=300d
>>> Model what I just bought was: idVendor=04b4, idProduct=8613 and this 
>>> is not
>>> supported!
>>>
>>> usb 2-1: New USB device found, idVendor=04b4, idProduct=8613
>>> usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>>> usbtest 2-1:1.0: FX2 device
>>> usbtest 2-1:1.0: high-speed {control bulk-in bulk-out} tests (+alt)
>>>
>>> Both products looks just same!
>>
>> Is there some program I could run what would "extract" all needed 
>> information
>> to developer, so driver could be created or known driver could be 
>> connected to
>> this ID?
>
> Your device eeprom is corrupted or eeprom is broken or connection to 
> eeprom is broken. 04b4:8613 is Cypress FX2 default USB ID. It tries to 
> download USB ID (also firmware in some cases) from the eeprom first 
> and after that enumerates to the USB bus.
>
> That device will not even work on Windows. Return it to the warranty.
>
> regards
> Antti
>
Yes. I think you are right..
I managed to get windows machine and installed needed software there.. 
It didn't find that USB device.. Then I connect my old CT-3650 to that 
cable and everything worked fine..
Problem is that I bought it from germany (DVBShop.net) and now I need 
"discuss" with them what we shall do it.. ;-)

-- 
JJussi