From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-1?Q?Lambrecht_J=FCrgen?= Subject: Re: net: phy: Add config option to specify external switch port to be used if switch is used as PHY Date: Tue, 4 Jun 2013 09:51:10 +0200 Message-ID: <51AD9C6E.9090302@televic.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Cc: "netdev@vger.kernel.org" To: rajkumar veer Return-path: Received: from ip2.televic.com ([81.82.194.222]:13112 "EHLO ip2.televic.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759638Ab3FDH4g convert rfc822-to-8bit (ORCPT ); Tue, 4 Jun 2013 03:56:36 -0400 In-Reply-To: Content-Language: en-US Sender: netdev-owner@vger.kernel.org List-ID: On 06/03/2013 09:06 PM, rajkumar veer wrote: > Hi Jurgen, > > I am working on iMX6 FEC. Hw has Marvel 88E6320 7-port switch=20 > instead of a phy, which is connected to CPU through RGMII via switc= h=20 > Port 5.I am using the DSDT driver suit for marvell switch 88E6320.as=20 > you konw that this setup doesn't work after the FEC code was switch t= o=20 > using phylib. I had to google my own name to remember :-). Can't you do as I did in my patch proposal, see=20 http://permalink.gmane.org/gmane.linux.kernel.embedded/3690 ? > > Could you please help me to find out that what are code modification=20 > is required for phy less fec driver to bypass phy detection/setup (ph= y=20 > lib). > > Regards > > Raj We use the fixed phy on our imx5 connected to a marvell switch, because= =20 we do not always have an SMI bus connected to the switch: drivers/net/phy/fixed.c You could also try this. Regards, J=FCrgen --=20 J=FCrgen Lambrecht R&D Associate Mobile: +32 499 644 531 Tel: +32 (0)51 303045 Fax: +32 (0)51 310670 http://www.televic-rail.com Televic Rail NV - Leo Bekaertlaan 1 - 8870 Izegem - Belgium Company number 0825.539.581 - RPR Kortrijk