From: Lubomir Popov <lpopov@mm-sol.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 0/6] Optimize ARM relocation
Date: Tue, 11 Jun 2013 17:22:17 +0300 [thread overview]
Message-ID: <51B73299.2050002@mm-sol.com> (raw)
In-Reply-To: <20130611144729.5bbf542b@lilith>
Hi Albert,
On 11/06/13 15:47, Albert ARIBAUD wrote:
> Hi Albert,
>
> On Tue, 11 Jun 2013 14:17:29 +0200, Albert ARIBAUD
> <albert.u.boot@aribaud.net> wrote:
>
>> This series optimizes relocation by ensuring ARM
>> binaries only use one type of relocation record,
>> R_ARM_RELATIVE., then optimizing relocation code
>> accordingly.
>
> This is a cosmetic version only; if no one complains loudly, this
> will be the final version too.
>
> So people, as this touches ARM relocation, I would appreciate it if a
> few people could test it on their own ARM HW target and see if they
> still get a prompt, if command completion still works, etc.
Applied the series to a relatively fresh (yesterday's) u-boot-ti/master
and tested on a custom OMAP5430 board. Boots normally. USB storage and
Ethernet (dhcp & ping), SD/MMC, I2C are all working.
Tested-by: Lubomir Popov <lpopov@mm-sol.com>
Regards,
Lubo
next prev parent reply other threads:[~2013-06-11 14:22 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-14 20:02 [U-Boot] [PATCH 0/5] Optimize ARM relocation Albert ARIBAUD
2013-05-14 20:02 ` [U-Boot] [PATCH 1/5] arm: generalize lib/bss.c into lib/sections.c Albert ARIBAUD
2013-05-14 20:02 ` [U-Boot] [PATCH 2/5] arm: make __image_copy_{start, end} compiler-generated Albert ARIBAUD
2013-05-14 20:02 ` [U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated Albert ARIBAUD
2013-05-14 20:02 ` [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
2013-05-14 20:03 ` [U-Boot] [PATCH 5/5] arm: optimize relocate_code routine Albert ARIBAUD
2013-05-14 23:54 ` Benoît Thébaudeau
2013-05-15 7:32 ` Albert ARIBAUD
2013-05-14 22:12 ` [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations Benoît Thébaudeau
2013-05-15 7:46 ` Albert ARIBAUD
2013-05-15 9:38 ` Albert ARIBAUD
2013-05-15 13:49 ` Benoît Thébaudeau
2013-05-15 15:01 ` Albert ARIBAUD
2013-05-14 22:09 ` [U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated Benoît Thébaudeau
2013-05-15 6:39 ` Albert ARIBAUD
2013-05-15 6:41 ` Albert ARIBAUD
2013-05-14 20:16 ` [U-Boot] [PATCH 0/5] Optimize ARM relocation Albert ARIBAUD
2013-05-14 23:58 ` Benoît Thébaudeau
2013-05-15 7:49 ` Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 0/6] " Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 2/6] remove all references to .dynsym Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 3/6] arm: generalize lib/bss.c into lib/sections.c Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 4/6] arm: make __image_copy_{start, end} compiler-generated Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 5/6] arm: make __rel_dyn_{start, " Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 6/6] arm: optimize relocate_code routine Albert ARIBAUD
2013-05-28 17:11 ` [U-Boot] [PATCH v2 4/6] arm: make __image_copy_{start, end} compiler-generated Benoît Thébaudeau
2013-05-28 17:04 ` [U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations Benoît Thébaudeau
2013-05-28 17:31 ` Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 0/6] Optimize ARM relocation Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 1/6] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 2/6] remove all references to .dynsym Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 3/6] arm: generalize lib/bss.c into lib/sections.c Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 4/6] arm: make __image_copy_{start, end} compiler-generated Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 5/6] arm: make __rel_dyn_{start, " Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 6/6] arm: optimize relocate_code routine Albert ARIBAUD
2013-06-11 12:47 ` [U-Boot] [PATCH v3 0/6] Optimize ARM relocation Albert ARIBAUD
2013-06-11 14:22 ` Lubomir Popov [this message]
2013-06-11 15:29 ` Albert ARIBAUD
2013-06-13 9:05 ` Albert ARIBAUD
2013-06-13 18:54 ` Jeroen Hofstee
2013-06-16 13:33 ` Jeroen Hofstee
2013-06-18 14:54 ` Albert ARIBAUD
2013-06-19 7:31 ` [U-Boot] [LONG] " Albert ARIBAUD
2013-06-12 22:38 ` [U-Boot] " Benoît Thébaudeau
2013-06-21 21:07 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51B73299.2050002@mm-sol.com \
--to=lpopov@mm-sol.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.