From: Eric Sandeen <sandeen@redhat.com>
To: linux-btrfs@vger.kernel.org
Subject: [PATCH 3/3 V2] Btrfs-progs: move btrfs cmd files to cmd/ subdir
Date: Tue, 11 Jun 2013 19:38:03 -0500 [thread overview]
Message-ID: <51B7C2EB.8090509@redhat.com> (raw)
In-Reply-To: <1370992519-21369-4-git-send-email-sandeen@redhat.com>
Move btrfs cmd files to cmd/ subdir
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
---
V2: move btrfsck symlink handling to cmd/Makefile too
Makefile | 38 ++++++-----------
cmd/Makefile | 61 ++++++++++++++++++++++++++++
btrfs.c => cmd/btrfs.c | 0
cmds-balance.c => cmd/cmds-balance.c | 0
cmds-check.c => cmd/cmds-check.c | 0
cmds-device.c => cmd/cmds-device.c | 0
cmds-filesystem.c => cmd/cmds-filesystem.c | 0
cmds-inspect.c => cmd/cmds-inspect.c | 0
cmds-qgroup.c => cmd/cmds-qgroup.c | 0
cmds-quota.c => cmd/cmds-quota.c | 0
cmds-receive.c => cmd/cmds-receive.c | 0
cmds-replace.c => cmd/cmds-replace.c | 0
cmds-restore.c => cmd/cmds-restore.c | 0
cmds-scrub.c => cmd/cmds-scrub.c | 0
cmds-send.c => cmd/cmds-send.c | 0
cmds-subvolume.c => cmd/cmds-subvolume.c | 0
help.c => cmd/help.c | 0
17 files changed, 74 insertions(+), 25 deletions(-)
create mode 100644 cmd/Makefile
rename btrfs.c => cmd/btrfs.c (100%)
rename cmds-balance.c => cmd/cmds-balance.c (100%)
rename cmds-check.c => cmd/cmds-check.c (100%)
rename cmds-device.c => cmd/cmds-device.c (100%)
rename cmds-filesystem.c => cmd/cmds-filesystem.c (100%)
rename cmds-inspect.c => cmd/cmds-inspect.c (100%)
rename cmds-qgroup.c => cmd/cmds-qgroup.c (100%)
rename cmds-quota.c => cmd/cmds-quota.c (100%)
rename cmds-receive.c => cmd/cmds-receive.c (100%)
rename cmds-replace.c => cmd/cmds-replace.c (100%)
rename cmds-restore.c => cmd/cmds-restore.c (100%)
rename cmds-scrub.c => cmd/cmds-scrub.c (100%)
rename cmds-send.c => cmd/cmds-send.c (100%)
rename cmds-subvolume.c => cmd/cmds-subvolume.c (100%)
rename help.c => cmd/help.c (100%)
diff --git a/Makefile b/Makefile
index 01b71ec..db8f348 100644
--- a/Makefile
+++ b/Makefile
@@ -10,10 +10,6 @@ objects = ctree.o disk-io.o radix-tree.o extent-tree.o print-tree.o \
root-tree.o dir-item.o file-item.o inode-item.o inode-map.o \
extent-cache.o extent_io.o volumes.o utils.o repair.o \
qgroup.o raid6.o free-space-cache.o
-cmds_objects = cmds-subvolume.o cmds-filesystem.o cmds-device.o cmds-scrub.o \
- cmds-inspect.o cmds-balance.o cmds-send.o cmds-receive.o \
- cmds-quota.o cmds-qgroup.o cmds-replace.o cmds-check.o \
- cmds-restore.o
libbtrfs_objects = send-stream.o send-utils.o rbtree.o btrfs-list.o crc32c.o
libbtrfs_headers = send-stream.h send-utils.h send.h rbtree.h btrfs-list.h \
crc32c.h list.h kerncompat.h radix-tree.h extent-cache.h \
@@ -46,8 +42,8 @@ endif
MAKEOPTS = --no-print-directory Q=$(Q)
-progs = mkfs.btrfs btrfs-debug-tree btrfsck \
- btrfs btrfs-map-logical btrfs-image btrfs-zero-log btrfs-convert \
+progs = mkfs.btrfs btrfs-debug-tree \
+ btrfs-map-logical btrfs-image btrfs-zero-log btrfs-convert \
btrfs-find-root btrfstune btrfs-show-super
# external libs required by various binaries; for btrfs-foo,
@@ -56,13 +52,17 @@ btrfs_convert_libs = -lext2fs -lcom_err
btrfs_image_libs = -lpthread
btrfs_fragment_libs = -lgd -lpng -ljpeg -lfreetype
-SUBDIRS = man tests
+SUBDIRS = cmd man tests
+STATIC_SUBDIRS = cmd
BUILDDIRS = $(patsubst %,build-%,$(SUBDIRS))
+STATIC_BUILDDIRS = $(patsubst %,buildstatic-%,$(STATIC_SUBDIRS))
INSTALLDIRS = $(patsubst %,install-%,$(SUBDIRS))
CLEANDIRS = $(patsubst %,clean-%,$(SUBDIRS))
.PHONY: $(SUBDIRS)
+.PHONY: $(STATIC_SUBDIRS)
.PHONY: $(BUILDDIRS)
+.PHONY: $(STATIC_BUILDDIRS)
.PHONY: $(INSTALLDIRS)
.PHONY: $(TESTDIRS)
.PHONY: $(CLEANDIRS)
@@ -70,7 +70,6 @@ CLEANDIRS = $(patsubst %,clean-%,$(SUBDIRS))
# Create all the static targets
static_objects = $(patsubst %.o, %.static.o, $(objects))
-static_cmds_objects = $(patsubst %.o, %.static.o, $(cmds_objects))
static_libbtrfs_objects = $(patsubst %.o, %.static.o, $(libbtrfs_objects))
# Define static compilation flags
@@ -110,7 +109,11 @@ $(BUILDDIRS): $(libs)
# NOTE: For static compiles, you need to have all the required libs
# static equivalent available
#
-static: version.h btrfs.static mkfs.btrfs.static btrfs-find-root.static
+static: version.h mkfs.btrfs.static btrfs-find-root.static $(STATIC_BUILDDIRS)
+$(STATIC_SUBDIRS): $(STATIC_BUILDDIRS)
+$(STATIC_BUILDDIRS): $(static_objects) $(static_libbtrfs_objects)
+ @echo "Making static in $(patsubst buildstatic-%,%,$@)"
+ $(Q)$(MAKE) $(MAKEOPTS) -C $(patsubst buildstatic-%,%,$@) static
version.h:
@echo " [SH] $@"
@@ -150,21 +153,6 @@ btrfs-%: version.h $(objects) $(libs) btrfs-%.o
@echo " [LD] $@"
$(Q)$(CC) $(CFLAGS) -o $@ $(objects) $@.o $(LDFLAGS) $(LIBS) $($(subst -,_,$@-libs))
-btrfs: $(objects) btrfs.o help.o $(cmds_objects) $(libs)
- @echo " [LD] $@"
- $(Q)$(CC) $(CFLAGS) -o btrfs btrfs.o help.o $(cmds_objects) \
- $(objects) $(LDFLAGS) $(LIBS) -lpthread
-
-btrfs.static: $(static_objects) btrfs.static.o help.static.o $(static_cmds_objects) $(static_libbtrfs_objects)
- @echo " [LD] $@"
- $(Q)$(CC) $(STATIC_CFLAGS) -o btrfs.static btrfs.static.o help.static.o $(static_cmds_objects) \
- $(static_objects) $(static_libbtrfs_objects) $(STATIC_LDFLAGS) $(STATIC_LIBS)
-
-# For backward compatibility, 'btrfs' changes behaviour to fsck if it's named 'btrfsck'
-btrfsck: btrfs
- @echo " [LN] $@"
- $(Q)$(LN) -f btrfs btrfsck
-
mkfs.btrfs: $(objects) $(libs) mkfs.o
@echo " [LD] $@"
$(Q)$(CC) $(CFLAGS) -o mkfs.btrfs $(objects) mkfs.o $(LDFLAGS) $(LIBS)
@@ -184,7 +172,7 @@ manpages:
clean: $(CLEANDIRS)
@echo "Cleaning"
$(Q)rm -f $(progs) cscope.out *.o .*.d btrfs-convert btrfs-image btrfs-select-super \
- btrfs-zero-log btrfstune btrfsck btrfs.static mkfs.btrfs.static btrfs-calc-size \
+ btrfs-zero-log btrfstune mkfs.btrfs.static btrfs-calc-size \
version.h \
$(libs) $(lib_links)
@@ -195,8 +183,6 @@ $(CLEANDIRS):
install: $(libs) $(progs) $(INSTALLDIRS)
$(INSTALL) -m755 -d $(DESTDIR)$(bindir)
$(INSTALL) $(progs) $(DESTDIR)$(bindir)
- # btrfsck is a link to btrfs in the src tree, make it so for installed file as well
- $(LN) -f $(DESTDIR)$(bindir)/btrfs $(DESTDIR)$(bindir)/btrfsck
$(INSTALL) -m755 -d $(DESTDIR)$(libdir)
$(INSTALL) $(libs) $(DESTDIR)$(libdir)
cp -a $(lib_links) $(DESTDIR)$(libdir)
diff --git a/cmd/Makefile b/cmd/Makefile
new file mode 100644
index 0000000..994febb
--- /dev/null
+++ b/cmd/Makefile
@@ -0,0 +1,63 @@
+CFLAGS += -I..
+
+cmds_objects = cmds-subvolume.o cmds-filesystem.o cmds-device.o cmds-scrub.o \
+ cmds-inspect.o cmds-balance.o cmds-send.o cmds-receive.o \
+ cmds-quota.o cmds-qgroup.o cmds-replace.o cmds-check.o \
+ cmds-restore.o
+objects := $(addprefix ../, $(objects))
+static_objects = $(patsubst %.o, %.static.o, $(objects))
+
+progs = btrfs btrfsck
+
+lib_LIBS = -luuid -lblkid -lm -lz -llzo2 -L.
+LIBS = $(lib_LIBS) $(addprefix ../, $(libs_static))
+
+libs_static = libbtrfs.a
+libs = $(addprefix ../, $(libs_static))
+
+.c.o:
+ $(Q)$(check) $<
+ @echo " [CC] $@"
+ $(Q)$(CC) $(DEPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c $<
+
+%.static.o: %.c
+ @echo " [CC] $@"
+ $(Q)$(CC) $(DEPFLAGS) $(AM_CFLAGS) $(STATIC_CFLAGS) -c $< -o $@
+
+all: $(progs)
+
+#
+# NOTE: For static compiles, you need to have all the required libs
+# static equivalent available
+#
+static: btrfs.static
+
+btrfs: $(objects) btrfs.o help.o $(cmds_objects) $(libs)
+ @echo " [LD] $@"
+ $(Q)$(CC) $(CFLAGS) -o btrfs btrfs.o help.o $(cmds_objects) \
+ $(objects) $(LDFLAGS) $(LIBS) -lpthread
+
+btrfs.static: $(static_objects) btrfs.static.o help.static.o $(static_cmds_objects) $(static_libbtrfs_objects)
+ @echo " [LD] $@"
+ $(Q)$(CC) $(STATIC_CFLAGS) -o btrfs.static btrfs.static.o help.static.o $(static_cmds_objects) \
+ $(static_objects) $(static_libbtrfs_objects) $(STATIC_LDFLAGS) $(STATIC_LIBS)
+
+# For backward compatibility, 'btrfs' changes behaviour to fsck if it's named 'btrfsck'
+btrfsck: btrfs
+ @echo " [LN] $@"
+ $(Q)$(LN) -f btrfs btrfsck
+
+clean:
+ $(Q)rm -f *.o .*.d $(progs)
+
+install: $(libs) $(progs) $(INSTALLDIRS)
+ $(INSTALL) -m755 -d $(DESTDIR)$(bindir)
+ $(INSTALL) $(progs) $(DESTDIR)$(bindir)
+ # btrfsck is a link to btrfs in the src tree, make it so for installed file as well
+ $(LN) -f $(DESTDIR)$(bindir)/btrfs $(DESTDIR)$(bindir)/btrfsck
+
+$(INSTALLDIRS):
+ $(Q)$(MAKE) $(MAKEOPTS) -C $(@:install-%=%) install
+
+
+-include .*.d
diff --git a/btrfs.c b/cmd/btrfs.c
similarity index 100%
rename from btrfs.c
rename to cmd/btrfs.c
diff --git a/cmds-balance.c b/cmd/cmds-balance.c
similarity index 100%
rename from cmds-balance.c
rename to cmd/cmds-balance.c
diff --git a/cmds-check.c b/cmd/cmds-check.c
similarity index 100%
rename from cmds-check.c
rename to cmd/cmds-check.c
diff --git a/cmds-device.c b/cmd/cmds-device.c
similarity index 100%
rename from cmds-device.c
rename to cmd/cmds-device.c
diff --git a/cmds-filesystem.c b/cmd/cmds-filesystem.c
similarity index 100%
rename from cmds-filesystem.c
rename to cmd/cmds-filesystem.c
diff --git a/cmds-inspect.c b/cmd/cmds-inspect.c
similarity index 100%
rename from cmds-inspect.c
rename to cmd/cmds-inspect.c
diff --git a/cmds-qgroup.c b/cmd/cmds-qgroup.c
similarity index 100%
rename from cmds-qgroup.c
rename to cmd/cmds-qgroup.c
diff --git a/cmds-quota.c b/cmd/cmds-quota.c
similarity index 100%
rename from cmds-quota.c
rename to cmd/cmds-quota.c
diff --git a/cmds-receive.c b/cmd/cmds-receive.c
similarity index 100%
rename from cmds-receive.c
rename to cmd/cmds-receive.c
diff --git a/cmds-replace.c b/cmd/cmds-replace.c
similarity index 100%
rename from cmds-replace.c
rename to cmd/cmds-replace.c
diff --git a/cmds-restore.c b/cmd/cmds-restore.c
similarity index 100%
rename from cmds-restore.c
rename to cmd/cmds-restore.c
diff --git a/cmds-scrub.c b/cmd/cmds-scrub.c
similarity index 100%
rename from cmds-scrub.c
rename to cmd/cmds-scrub.c
diff --git a/cmds-send.c b/cmd/cmds-send.c
similarity index 100%
rename from cmds-send.c
rename to cmd/cmds-send.c
diff --git a/cmds-subvolume.c b/cmd/cmds-subvolume.c
similarity index 100%
rename from cmds-subvolume.c
rename to cmd/cmds-subvolume.c
diff --git a/help.c b/cmd/help.c
similarity index 100%
rename from help.c
rename to cmd/help.c
---
1.7.1
next prev parent reply other threads:[~2013-06-12 0:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-11 23:15 [PATCH 0/3] Btrfs-progs: make some subdirs Eric Sandeen
2013-06-11 23:15 ` [PATCH 1/3] Btrfs-progs: Add Makefile infrastructure for subdirs Eric Sandeen
2013-09-02 14:26 ` David Sterba
2013-06-11 23:15 ` [PATCH 2/3] Btrfs-progs: move test tools to tests/ subdir Eric Sandeen
2013-09-02 14:43 ` David Sterba
2013-09-03 20:53 ` Eric Sandeen
2013-06-11 23:15 ` [PATCH 3/3] Btrfs-progs: move btrfs cmd files to cmd/ subdir Eric Sandeen
2013-06-12 0:28 ` Eric Sandeen
2013-06-12 0:38 ` Eric Sandeen [this message]
2013-09-02 14:45 ` [PATCH 3/3 V2] " David Sterba
2013-09-03 20:55 ` Eric Sandeen
2013-06-11 23:24 ` [PATCH 0/3] Btrfs-progs: make some subdirs Zach Brown
2013-06-12 0:01 ` Chris Mason
2013-06-12 0:40 ` [PATCH 4/3] Btrfs-progs: fix up .gitignore Eric Sandeen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51B7C2EB.8090509@redhat.com \
--to=sandeen@redhat.com \
--cc=linux-btrfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.