Re: how to flash barebox and set root variable? - barebox is gone :(

From: Adam Furmanczuk <afurmanczuk@knowtrek.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: how to flash barebox and set root variable? - barebox is gone :(
Date: Wed, 12 Jun 2013 10:22:48 +0200	[thread overview]
Message-ID: <51B82FD8.30108@knowtrek.com> (raw)
In-Reply-To: <20130612080747.GV32299@pengutronix.de>

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 12.06.2013 10:07, Sascha Hauer wrote:
> On Wed, Jun 12, 2013 at 09:19:48AM +0200, Adam Furmanczuk wrote:
>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
>> 
>> On 12.06.2013 08:12, Adam Furmanczuk wrote:
>>> ********* *POCZATEK CZESCI SZYFROWANEJ / PODPISANEJ* *********
>>> 
>>> On 10.06.2013 19:29, Sascha Hauer wrote:
>>>>> On Mon, Jun 10, 2013 at 07:23:33PM +0200, Adam Furmanczuk 
>>>>> wrote:
>>>>>>> On 10.06.2013 19:07, Alexander Shiyan wrote:
>>>>>>>>>>> flashing barebox.bin to /dev/nor0.kernel
>>>>>>>>>>>>> Unknown command 'tftp' - try 'help'
>>>>>>>>> Seems tftp command is not compiled in. Ensure that
>>>>>>>>> you have CONFIG_CMD_TFTP in your .config.
>>>>>>> Thanks Alexander,
>>>>>>> 
>>>>>>> but my barebox binary is gone . Have been a bit
>>>>>>> careles... I would need to flash the binary over my OCD
>>>>>>> USB controller, but do not realy have a clue how to do
>>>>>>> this. I am waiting for support reply for this ICnova
>>>>>>> iMX536 SODIMM module, they should give me some steps
>>>>>>> how to proceed.
>>>>> [...] CONFIG_ARCH_IMX_USBLOADER in a recent barebox. After
>>>>>  compiling you will have scripts/imx/imx-usb-loader
>>> Hi Sascha,
>>> 
>>> I have included the option: CONFIG_ARCH_IMX_USBLOADER=y then
>>> run make clean and then make again, but there is no such file,
>>> tried to search recursively for similar file in barebox top
>>> directory with: find ./ -iname \*usb-loader\*
>>> 
>> 
>> My bad, i got the latest git snaphot (699-bcc9) and there is 
>> USBLOADER.. have still some issues with compiling it. There is
>> "memory bank" error [1]. Have seen there was a patch recently,
>> but do not know the option to enable/disable
> 
> When CONFIG_ARCH_IMX_USBLOADER is enabled in your config you can
> do:
> 
> make scripts/imx/
> 
> This should build the tool only.
> 

In the current 699-bcc9 branch i run:

 make ARCH=arm freescale_mx53_loco_defconfig

than i edit the .config by hand and set CONFIG_ARCH_IMX_USBLOADER=y
when running: make scripts/imx

it tells me no goals. nothing to do.

I run gcc on your script file directly, but the libush.h is misssing I
should get it from the MX53 loco project?

Thanks for help,

Adam

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAlG4L9gACgkQefEEI87R1DfaYACghktQZlZhmJ2hM7QNyX/g3bL7
ebcAoMvwQGN4jzzGEh1U1HpxBOPEwHAq
=dP3D
-----END PGP SIGNATURE-----

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox