All of lore.kernel.org
 help / color / mirror / Atom feed
From: Torbjørn <lists@skagestad.org>
To: xfs@oss.sgi.com
Subject: Kernel bug when mounting xfs on dm-crypt + md-raid6 using 3.10-rc5
Date: Thu, 13 Jun 2013 15:01:03 +0200	[thread overview]
Message-ID: <51B9C28F.2020703@skagestad.org> (raw)

Hi,

I have a 8 drive md-raid6 + dm-crypt with xfs on top.
When trying to mount using 3.10-rc5 (ubuntu mainline ppa) I get the 
following kernel bug:

[ 1017.056091] SGI XFS with ACLs, security attributes, realtime, large 
block/inode numbers, no debug enabled
[ 1017.057607] XFS (dm-11): Mounting Filesystem
[ 1017.195409] ------------[ cut here ]------------
[ 1017.195881] Kernel BUG at ffffffff81485fb2 [verbose debug info 
unavailable]
[ 1017.196603] invalid opcode: 0000 [#1] SMP
[ 1017.197050] Modules linked in: xfs vhost_net macvtap macvlan 
ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE 
ipt_REJECT xt_CHECKSUM sch_prio bridge stp llc xt_state iptable_filter 
dm_crypt xt_CLASSIFY xt_tcpudp xt_DSCP iptable_mangle iptable_nat 
nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack 
ip_tables x_tables intel_powerclamp kvm_intel kvm psmouse serio_raw 
microcode ppdev lpc_ich mac_hid parport_pc w83627ehf hwmon_vid coretemp 
nfsd lp nfs_acl auth_rpcgss nfs parport fscache lockd sunrpc btrfs 
zlib_deflate libcrc32c raid1 raid0 multipath linear raid456 async_pq 
async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid10 
hid_generic usbhid hid ast ttm crc32_pclmul drm_kms_helper 
ghash_clmulni_intel drm aesni_intel ablk_helper cryptd lrw gf128mul 
glue_helper e1000e mpt2sas i2c_algo_bit ptp sysimgblt sysfillrect 
pps_core ahci aes_x86_64 syscopyarea scsi_transport_sas libahci 
raid_class video
[ 1017.206695] CPU: 1 PID: 486 Comm: md0_raid6 Not tainted 
3.10.0-031000rc5-generic #201306082135
[ 1017.207603] Hardware name: To be filled by O.E.M. To be filled by 
O.E.M./P8B-X series, BIOS 2107 05/04/2012
[ 1017.208681] task: ffff88040e509770 ti: ffff88040de2a000 task.ti: 
ffff88040de2a000
[ 1017.209498] RIP: 0010:[<ffffffff81485fb2>] [<ffffffff81485fb2>] 
scsi_setup_fs_cmnd.part.32+0x82/0x90
[ 1017.210467] RSP: 0018:ffff88040de2bb68  EFLAGS: 00010046
[ 1017.211021] RAX: 0000000000000000 RBX: ffff8804106d4800 RCX: 
0000000000000002
[ 1017.211772] RDX: 0000000000001000 RSI: ffff8803d3b89028 RDI: 
ffff8804106d4800
[ 1017.212521] RBP: ffff88040de2bb78 R08: ffff8803d3b88f30 R09: 
ffff9ef774422900
[ 1017.213300] R10: 0000000018422880 R11: 00000000ffffffff R12: 
ffff8803d3b89028
[ 1017.214054] R13: 0000000000000001 R14: ffff8804106d4800 R15: 
ffff88041032a800
[ 1017.214802] FS:  0000000000000000(0000) GS:ffff88042fc40000(0000) 
knlGS:0000000000000000
[ 1017.215691] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1017.216287] CR2: 00007f9eaa5a4000 CR3: 0000000001c0c000 CR4: 
00000000001427e0
[ 1017.217069] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 
0000000000000000
[ 1017.217819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 
0000000000000400
[ 1017.218568] Stack:
[ 1017.218769]  ffff8804106d4800 ffff8803d3b89028 ffff88040de2bb98 
ffffffff81485fef
[ 1017.219577]  ffff8803d3b89028 ffff8804106ac100 ffff88040de2bc08 
ffffffff81496c0f
[ 1017.220379]  ffff88040de2bbd8 ffffffff81328aa5 ffff880400001000 
0000000018422880
[ 1017.221176] Call Trace:
[ 1017.221415]  [<ffffffff81485fef>] scsi_setup_fs_cmnd+0x2f/0x40
[ 1017.222024]  [<ffffffff81496c0f>] sd_prep_fn+0xff/0xb00
[ 1017.222567]  [<ffffffff81328aa5>] ? 
deadline_remove_request.isra.3+0x55/0x90
[ 1017.223336]  [<ffffffff81310d0e>] blk_peek_request+0xfe/0x270
[ 1017.223953]  [<ffffffff8148588f>] scsi_request_fn+0x4f/0x430
[ 1017.224546]  [<ffffffff8130b757>] __blk_run_queue+0x37/0x50
[ 1017.225145]  [<ffffffff8130d9fd>] queue_unplugged+0x3d/0xc0
[ 1017.225723]  [<ffffffff81311203>] blk_flush_plug_list+0x183/0x210
[ 1017.226360]  [<ffffffff813112a8>] blk_finish_plug+0x18/0x50
[ 1017.226943]  [<ffffffffa0148497>] raid5d+0x1b7/0x1d0 [raid456]
[ 1017.227548]  [<ffffffff8153b66d>] md_thread+0x11d/0x170
[ 1017.228090]  [<ffffffff8106c070>] ? add_wait_queue+0x60/0x60
[ 1017.228681]  [<ffffffff8153b550>] ? md_rdev_init+0x110/0x110
[ 1017.229274]  [<ffffffff8106b8b0>] kthread+0xc0/0xd0
[ 1017.229795]  [<ffffffff8106b7f0>] ? flush_kthread_worker+0xb0/0xb0
[ 1017.230468]  [<ffffffff816d545c>] ret_from_fork+0x7c/0xb0
[ 1017.231048]  [<ffffffff8106b7f0>] ? flush_kthread_worker+0xb0/0xb0
[ 1017.231719] Code: fd ff ff 5b 41 5c 5d c3 48 8b 00 48 85 c0 74 b7 48 
8b 40 48 48 85 c0 74 ae ff d0 85 c0 74 a8 eb e2 b8 02 00 00 00 0f 1f 00 
eb d8 <0f> 0b 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48
[ 1017.234403] RIP  [<ffffffff81485fb2>] 
scsi_setup_fs_cmnd.part.32+0x82/0x90
[ 1017.235121]  RSP <ffff88040de2bb68>
[ 1017.482522] ---[ end trace fa18c0d8cd90bd2f ]---

3.10-rc4 has the same issue. I have not tried any earlier 3.10 kernels
The system mounts fine using 3.9.5 (also ubuntu ppa)

If I can provide any other info to help, please let me know.

--
Torbjørn

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

             reply	other threads:[~2013-06-13 13:01 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-13 13:01 Torbjørn [this message]
2013-06-13 13:10 ` Kernel bug when mounting xfs on dm-crypt + md-raid6 using 3.10-rc5 Eric Sandeen
2013-06-13 13:29   ` Torbjørn
2013-06-16 13:27     ` Torbjørn Skagestad

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51B9C28F.2020703@skagestad.org \
    --to=lists@skagestad.org \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.