Re: Request for OMAPDSS testing

[Tomi Valkeinen <tomi.valkeinen@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 1013 bytes --]

On 13/06/13 18:51, Igor Grinberg wrote:
> Hi Tomi,
> 
> On 06/04/13 10:40, Tomi Valkeinen wrote:
>> Hi guys,
> 
>> I've made some big changes on the omapdss device model, which involves
>> converting all the panel drivers. I've got only a bunch of boards, so I
>> hope some of you can perhaps do some minimal tests on some other boards.
> 
>> I've got: Beagle (old one), Panda, 4430SDP, Overo with LCD43.
> 
>> The code can be found from the below git branch. It's based on 3.10-rc1.
> 
>> git://gitorious.org/linux-omap-dss2/linux.git work/dss-dev-model
> 
> Works on cm-t3730.
> Tested with tdo24m LCD and DVI.

Thanks!

> Although one thing is missing from the tfp410 driver is
> the PD GPIO polarity. I had to adjust it locally to get the DVI working.
> The original polarity was high = disabled, low = enabled.

Hmm, but this is missing from the old driver also, isn't it? At least
with a quick glance the old and new tfp410 drivers do the same thing
with the PD gpio.

 Tomi


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]